LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
4 Core Shielded Red — Fire Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

Fire Alarm Cable

4 Core Shielded Red

Bare Copper 4 Core shielded fire performance cable apply for Fire Alarm System Low Voltage

4 Core Shielded Red is built as a 4 core Shielded bare copper cable within the LANP Fire Alarm Cable range. As catalogued by the factory: Bare Copper 4 Core shielded fire performance cable apply for Fire Alarm System Low Voltage.

It is supplied in Red. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryFire Alarm Cable
ShieldingShielded
Conductorbare copper
ColourRed
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

4 Core Shielded Red uses a bare copper conductor, so loop resistance stays where the fire alarm cable specification says it should be instead of climbing with run length.

Shielded Screening

4 Core Shielded Red carries a Shielded screen, which is what keeps the link usable where the cable has to run alongside mains for a long distance.

4 Core Build

With 4 core, 4 Core Shielded Red leaves room for the device that gets added after handover — which is the normal case, not the exception.

Red Jacket

The red jacket on 4 Core Shielded Red is an identification decision as much as a cosmetic one — it is what tells the next contractor what they are looking at.

OEM Branding Available

From 1 km we print your brand on 4 Core Shielded Red rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

4 Core Shielded Red does not leave the floor untested. Resistance, continuity and dielectric checks run on each production lot, and the records stay with the batch.

Technical Data

Specification Sheet

Values below are the factory specification for 4 Core Shielded Red. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name4 Core Shielded Red
CategoryFire Alarm Cable
ShieldingShielded
Conductor Materialbare copper
Cores4 core
Jacket ColourRed
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Shielded
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper

Who It Is For

  • Fire alarm contractors wiring detection and sounder loops
  • M&E contractors coordinating life safety with other services
  • Maintenance providers extending existing panels
  • Distributors supplying the fire trade

Problems It Solves

  • Fire circuits that cannot be distinguished from general wiring
  • Loop resistance drifting out of the panel's acceptance window
  • Detector loops picking up interference from parallel power runs
  • Compliance documents unavailable at handover

Application Scenarios

  • Detector and call point loops in commercial buildings
  • Sounder and beacon circuits
  • Interface wiring to plant and door hold-open devices
  • Panel extensions on existing systems
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Foil and braid shielding

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • Wstlab CE certification covering 2-core to 22-core fire alarm cable at AC60/750 V, 50/60 Hz
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
2 Core Shielded RedSame construction with a different core count: 4 core here against 2 core. Core count is fixed once the cable is in the wall, so allow spares.
2 Core Unshielded RedSame family, different screening: this one is Shielded where that one is UTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Segregate 4 Core Shielded Red from power circuits and mark both ends. Inspection depends on being able to identify the circuit on sight.
  • Terminate 4 Core Shielded Red with spare cores parked at the device. It costs nothing now and saves a pull later.
  • Before committing volume on 4 Core Shielded Red, take a sample reel and verify it on your own site.

Before a first bulk order of 4 Core Shielded Red: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The Fire Alarm Cable Range

See all 6 fire alarm cable products →

Fire Cable2 Core Shielded Red — Fire Cable manufactured by LANP CABLE

2 Core Shielded Red

red fire alarm cable 2x1.5mm fireproof copper wire lsoh lszh jacket

Shielded2 coreRed
View specification →
Fire Cable2 Core Unshielded Red — Fire Cable manufactured by LANP CABLE

2 Core Unshielded Red

2 Core Red Fire Alarm Security Access Cable Wire Sound and Alarm Cable Solid Wire Unshielded

UTP2 coreRed
View specification →
Fire Cable4 Core Unshielded Red — Fire Cable manufactured by LANP CABLE

4 Core Unshielded Red

4 core solid fire alarm cable fire protection security signal control wire red copper for…

UTP4 coreRed
View specification →
Fire Cable6 Core Shielded Red — Fire Cable manufactured by LANP CABLE

6 Core Shielded Red

6 Core Fire Alarm Cable solid copper Conductor Overall Shielded Red PVC 1000ft for Fire…

Shielded6 coreRed
View specification →

Related guides

Where it is installed

Questions

4 Core Shielded Red — Questions

Is the conductor in 4 Core Shielded Red really bare copper?

Yes — bare copper throughout. Strip a core from any 4 Core Shielded Red drum and the cut end is copper all the way through, with no aluminium centre.

What packing formats are available for 4 Core Shielded Red?

Packing for 4 Core Shielded Red is decided with the order — reels, coils or cartons, in whatever unit length suits the installers.

Can 4 Core Shielded Red be supplied in another jacket colour?

4 Core Shielded Red is catalogued in red. Other colours run on production orders, and colour is normally decided at the same time as the jacket print text.

What is the minimum order and lead time for 4 Core Shielded Red?

4 Core Shielded Red is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

What compliance documentation ships with 4 Core Shielded Red?

4 Core Shielded Red is covered by the Wstlab CE certificate for 2-core to 22-core fire alarm cable at AC60/750 V, 50/60 Hz. A copy travels with the goods.

Request pricing on 4 Core Shielded Red

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue