LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cat6 Patch Cord 20M — CAT6 Patch Cord manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT6 Patch Cord

Cat6 Patch Cord 20M

Category6 RJ45 LAN Network Ethernet Router Switch 20M Cat6 Patch Cord RJ45 For Computer,Printer,Laptop

Cat6 Patch Cord 20M is built as a CAT6 cable within the LANP CAT6 Patch Cord range. The original specification reads: Category6 RJ45 LAN Network Ethernet Router Switch 20M Cat6 Patch Cord RJ45 For Computer,Printer,Laptop.

MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT6 Patch Cord
Length20 m
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Packed As You Handle It

20 m is the stocked format for Cat6 Patch Cord 20M; tell us how it will be handled and we will match the packing to it.

OEM Branding Available

OEM on Cat6 Patch Cord 20M means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

Each production lot of Cat6 Patch Cord 20M is measured before packing. That is how the second order matches the sample you approved on the first.

Technical Data

Specification Sheet

Values below are the factory specification for Cat6 Patch Cord 20M. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameCat6 Patch Cord 20M
CategoryCAT6 Patch Cord
Cable ClassCAT6
ConnectorRJ45 8P8C, gold-plated contacts
Cord Length20 m
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT6 specification
  • RJ45 8P8C, gold-plated contacts
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Data centre and comms room teams
  • Integrators shipping pre-built racks
  • IT departments standardising desk and rack patching
  • Distributors stocking a length and colour matrix

Problems It Solves

  • Intermittent links traced back to an untested cord
  • Latches snapping off at the first re-patch
  • Boots too bulky for high-density patch panels
  • Inconsistent lengths making cable management impossible

Application Scenarios

  • Patch panel to switch links in a comms room
  • Desk and access point drops from a floor box
  • Pre-built rack shipments to remote sites
  • Retail and channel packs under a distributor brand
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Fluke DSX channel certification on every lot
  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
Cat6 Patch Cord 10MSame cord specification in a different length — 20 m against 10 m. Ordering the right length per position is what keeps a patch field manageable.
Cat6 Patch Cord 15MSame cord specification in a different length — 20 m against 15 m. Ordering the right length per position is what keeps a patch field manageable.
Use Guide

Installing It Without Losing Performance

  • Pull Cat6 Patch Cord 20M at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Every millimetre of untwisted conductor at a Cat6 Patch Cord 20M termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Keep Cat6 Patch Cord 20M off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.

Before a first bulk order of Cat6 Patch Cord 20M: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT6 Patch Cord Range

See all 9 cat6 patch cord products →

CAT6 Patch CordCat6 Patch Cord 10M — CAT6 Patch Cord manufactured by LANP CABLE

Cat6 Patch Cord 10M

CAT6 Network Cable Ethernet Patch Cord 10M 26AWG Copper UTP Wire Router Modem Lot

UTP26 AWG
View specification →
CAT6 Patch CordCat6 Patch Cord 15M — CAT6 Patch Cord manufactured by LANP CABLE

Cat6 Patch Cord 15M

15M Ethernet Network Cable LAN Router Internet RJ45 8P8C UTP CAT6 Patch Cord Cable For…

UTP8 core
View specification →
CAT6 Patch CordCat6 Patch Cord 1M — CAT6 Patch Cord manufactured by LANP CABLE

Cat6 Patch Cord 1M

Category 6 Ethernet Cable Lan Network RJ-45 Internet Router Cat6 Patch Cord Blue 1M

1 mBlue
View specification →
CAT6 Patch CordCat6 Patch Cord 2M — CAT6 Patch Cord manufactured by LANP CABLE

Cat6 Patch Cord 2M

Network and interface CAT6 LAN Patch Cord RJ45 Ethernet Cable for Desktop Computers, Modem,…

2 m
View specification →

Related guides

Where it is installed

Questions

Cat6 Patch Cord 20M — Questions

How is Cat6 Patch Cord 20M packed?

Cat6 Patch Cord 20M ships as 20 m as standard. Other formats are produced to order once we know how the cable will be handled on site.

Can you print our brand on Cat6 Patch Cord 20M?

From 1 km we extrude your brand onto the Cat6 Patch Cord 20M jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for Cat6 Patch Cord 20M?

A trial reel of 100 m is enough to evaluate Cat6 Patch Cord 20M. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is Cat6 Patch Cord 20M covered by a compliance certificate?

Cat6 Patch Cord 20M falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on Cat6 Patch Cord 20M

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue