LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Telephone Drop Wire — Telephone Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

Telephone Cable

Telephone Drop Wire

2 Core 18 Awg Outdoor Copper CCS Telephone Cable PE Insulation Telephone Aerial Drop Wire

Telephone Drop Wire is built as a 2 core cable within the LANP Telephone Cable range, specified for external runs. The factory specification for this line reads: 2 Core 18 Awg Outdoor Copper CCS Telephone Cable PE Insulation Telephone Aerial Drop Wire.

It is supplied with a PE jacket. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryTelephone Cable
JacketPE
Gauge18 AWG
Cores2 core
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Built For External Routes

Telephone Drop Wire is built for external routes. The jacket is specified for UV and moisture rather than an indoor compound sent outside and expected to cope.

18 AWG Conductor

Telephone Drop Wire runs a 18 AWG conductor. Gauge is the figure that decides PoE reach and heat rise in a full bundle, so it is measured, not assumed.

2 Core Build

2 core on Telephone Drop Wire. Adding cores at order time is close to free; re-pulling a riser is a day.

OEM Branding Available

From 1 km we print your brand on Telephone Drop Wire rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Every Telephone Drop Wire batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for Telephone Drop Wire. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameTelephone Drop Wire
CategoryTelephone Cable
Conductor Gauge18 AWG
Cores2 core
Jacket MaterialPE
InstallationOutdoor
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Manufactured on the LANP telephone cable line in Jieyang, China
  • Jacket printed with specification and rating as standard

Materials

  • Jacket: PE

Who It Is For

  • Telecom engineers doing installation and fault work
  • Building maintenance teams extending voice points
  • Door entry installers using low-core signal runs
  • Distributors stocking the voice accessory range

Problems It Solves

  • Drop wire stretching and failing at the termination point
  • Flat cable used for an external run where it will not last
  • Jumper wire too thick to dress neatly on a frame
  • Core count that does not match an existing socket wiring scheme

Application Scenarios

  • Extension runs from socket to handset
  • Modular leads inside offices and homes
  • Pole-to-building drops on copper networks
  • MDF and cabinet jumpering
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
4 Wire Telephone CableSame construction with a different core count: 2 core here against 4 core. Core count is fixed once the cable is in the wall, so allow spares.
Use Guide

Installing It Without Losing Performance

  • Keep the Telephone Drop Wire pair code consistent through every joint and frame, and write the allocation down.
  • Leave a service loop at each Telephone Drop Wire termination so the cable can be re-worked without a splice.
  • Drip-loop and seal Telephone Drop Wire at the building entry point.

Before a first bulk order of Telephone Drop Wire: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The Telephone Cable Range

See all 8 telephone cable products →

Telephone Cable2 Wire Telephone Cable — Telephone Cable manufactured by LANP CABLE

2 Wire Telephone Cable

voice and data round 2 wire telephone cable solid bare copper white

White
View specification →
Telephone Cable2C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

2C Flat Telephone Cable

Flat Telephone Wire Cable Lead 2 Pin for ADSL DSL Router Modem Phone Cable

2 core
View specification →
Telephone Cable4 Wire Telephone Cable — Telephone Cable manufactured by LANP CABLE

4 Wire Telephone Cable

Internal 4 Core Telephone Wire Cable HYA 4x0.5mm Solid Copper White 100M

4 coreWhite
View specification →
Telephone Cable4C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

4C Flat Telephone Cable

28 AWG Copper Core 4 Conductor Flat Modular Line Telephone Cord Cable

28 AWG4 core
View specification →

Related guides

Questions

Telephone Drop Wire — Questions

What packing formats are available for Telephone Drop Wire?

Reel, coil and carton formats are all set per order for Telephone Drop Wire. Tell us how it will be handled on site and we will match the packing to that.

Can you print our brand on Telephone Drop Wire?

Yes, from 1 km per specification. Below that Telephone Drop Wire ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for Telephone Drop Wire?

Telephone Drop Wire is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

Request pricing on Telephone Drop Wire

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue