Motorcycle Recorder
Two Camera Motorcycle Kit With a Handlebar Remote
- Camera heads are separate from the control unit so they can be hidden in the fairing
- Handlebar remote lets the rider mark a file without stopping
- Front and rear coverage from one loom
Product Overview
Motorcycle Recorder at a Glance
A recorder built for two wheels: a central control unit, two separate weather exposed camera heads for front and rear, a display, and a handlebar remote so the rider can mark a file without taking a hand off the bar for long.
Motorcycles need a different product from cars because the electronics cannot sit on a windshield, the cameras are in the weather full time, and the rider cannot operate a touchscreen while moving.
Key Benefits
Why Buyers Specify This Model
Camera heads are separate from the control unit so they can be hidden in the fairing
Handlebar remote lets the rider mark a file without stopping
Front and rear coverage from one loom
Supplied as a kit with the wiring in the box
Application and Fit
Where It Is Used and Who It Is For
Application Scenarios
- Motorcycles and scooters
- Delivery riders
- Touring bikes
- Rider training
Who It Is For
- Motorcycle accessory distributors
- E-commerce sellers
- Delivery fleets
- Dealers
Problems It Solves
- Car dash cams that cannot be fitted to a bike
- Controls a rider cannot reach in motion
- Camera bodies exposed on the handlebars
- Front only coverage on a vulnerable vehicle
Technical Features
Technical Features
- Windshield or handlebar mounting hardware supplied in the box
- Retail packaging, manual and branding available under OEM and ODM service
- Certificate coverage including CE, FCC and RoHS on the product range
- Carton packing prepared for express, air and sea freight
- Firmware and menu language adjusted for the destination market on OEM orders
Specifications
Configuration and Specification Sheet
| Format | Two channel motorcycle kit |
|---|---|
| Cameras | Two separate bullet camera heads, front and rear |
| Control | Handlebar remote |
| Wiring | Loom with camera and power leads |
Full electrical specification is issued per order. Sensor, resolution, lens angle, supply voltage, cable length and connector on this model are confirmed against your vehicle and your head end before production, because they are the parameters most often changed on an OEM order. Ask for the specification sheet and we will send it with the quotation.
Materials
Materials and Construction
Recorder bodies use moulded housings with brushed or textured front panels, and multi element glass lens assemblies. Motorcycle camera heads are supplied in weather exposed housings separate from the control unit. Exact material specification for a given model is confirmed before an order is placed.
Manufacturing Process
How It Is Made
Manufactured at our Guangzhou facility. Specification is fixed first, a physical sample is built and approved, components are sourced against the approved sample, the unit is assembled and sealed, then function checked and packed. Production is carried out strictly in accordance with the ISO9001 standard.
Quality Control
Quality Control Steps
- Incoming component check against the approved sample specification
- Assembly with gasket compression and cable gland made off on sealed housings
- Power up and image output check on every unit
- Infrared or assist lamp function check where the model has them
- Final visual and packaging check before carton packing
Certifications
Certifications Held on the Range
- ISO9001
- IP68
- CE
- FCC
- RoHS
- E-mark
Certificates apply to specific models and test reports. Ask for the certificate covering the exact model you are ordering rather than a general company document.
Customization
Customization Options
- Housing colour and surface finish
- Cable length made to the routed distance on your vehicle
- Connector type, 4 pin aviation or RCA, or to your drawing
- Label and silkscreen artwork under your own brand
- Retail box, inner packing and printed manual
- Carton marking and quantity per carton
Comparison
Compared With Other Products in the Range
| Motorcycle Recorder | Dash Camera | Car Camera Recorder | |
|---|---|---|---|
| Range | Dash Cameras | Dash Cameras | Dash Cameras |
| Built for | Two Camera Motorcycle Kit With a Handlebar Remote | Single Lens Windshield Recorder With a Wide Aperture Lens | Front and Rear Kit With a Separate Reversing Camera |
| Primary application | Motorcycles and scooters | Private cars | Private cars |
| Main advantage | Camera heads are separate from the control unit so they can be hidden in the fairing | Sits behind the mirror and out of the driver's sight line | Records the rear as well as the front for the most common claim type |
If you are unsure which of these fits your vehicle, send a photo of the mounting position and we will tell you which one to order.
Use Guide
Installation and Use Guide
A short fitting sequence. The full installation guide is available in the Download Center.
- 01
Confirm the Mounting Position
Hold the motorcycle recorder where it will be fitted and confirm the view or the screen position works before anything is drilled or fixed.
- 02
Check the Cable Reaches
Route the full cable from the unit to the head end and confirm it reaches with slack to spare, away from exhaust heat and moving parts.
- 03
Fix the Unit
Fit the bracket, collar or stand and seal any panel entry point. Leave a drip loop below an exterior entry so water runs away from the hole.
- 04
Connect Power and Video
Make the video and power connections in dry positions, supported so no joint carries the weight of the loom.
- 05
Set and Test
Power up, set the angle or the screen position from the driver's seat, and test again after dark and with the vehicle wet.
Applications
Industries This Product Serves
Knowledge
Related Guides
Downloads
Documents for This Product
Explore
Related Products
Dash CamerasDash CameraSingle Lens Windshield Recorder With a Wide Aperture Lens
View Product
Dash CamerasCar Camera RecorderFront and Rear Kit With a Separate Reversing Camera
View Product
Vehicle CamerasMini Rear View CameraLip Mount Bullet Camera for Tight Rear Panels
View Product
Dash CamerasVehicle BlackboxTouchscreen Recorder With an On Screen Menu
View ProductFAQ
Motorcycle Recorder FAQ
What is the MOQ on the Motorcycle Recorder?
MOQ varies by model and by how much customisation the order carries. Send your quantity and destination market and we will confirm the MOQ in writing with the quotation.
Can this product be supplied under our own brand?
Yes. OEM and ODM service covers housing colour, cable and connector specification, label artwork, printed manual and retail packaging.
Which certificates cover this product?
Our product range holds IP68, CE, FCC, RoHS and E-mark certificates, and production is carried out strictly in accordance with the ISO9001 standard. Ask for the certificate covering this exact model before shipping.
How is it packed and shipped?
Carton packing, with retail boxes and inner packing where the order calls for them. Shipment by express, air, land or sea, with sea shipments loading at Shenzhen or Guangzhou.
Can I get a sample before placing a production order?
Yes. Samples are dispatched for physical approval before production. Ask for a sample through WhatsApp or email and we will confirm the cost and the lead time.
Do you have a CAD file or drawing available?
CAD files are not published for download. Request a CAD file or a dimensioned drawing through WhatsApp or email and we will send it directly once the application is confirmed.
Next Step
Get a Quotation on the Motorcycle Recorder
Send your quantity, destination market and any customisation you need. We will come back with price, MOQ and lead time.