4.3 Inch Stand Alone Monitor
Compact Pedestal Monitor for a Fixed Dash Position
- No moving screen mechanism to wear out
- Tilt adjustment for the driver's seating position
- Permanently visible so the camera actually gets used
Product Overview
4.3 Inch Stand Alone Monitor at a Glance
A 4.3 inch screen on a pedestal stand, fixed to the dash top and left in position. The screen tilts on the stand so the angle can be set for the driver's seating position.
Fleet workshops prefer a fixed screen over a folding one because there is one less moving part to fail, and because a permanently visible screen is used more often.
Key Benefits
Why Buyers Specify This Model
No moving screen mechanism to wear out
Tilt adjustment for the driver's seating position
Permanently visible so the camera actually gets used
Compact enough for a car or a van dash
Application and Fit
Where It Is Used and Who It Is For
Application Scenarios
- Vans
- Light trucks
- Passenger cars
- Service vehicles
Who It Is For
- Fleet workshops
- Installers
- Accessory retailers
- Distributors
Problems It Solves
- Folding mechanisms that fail in service
- Screens set at the wrong angle
- Cameras that go unused because the screen is hidden
- Large monitors that will not fit a car dash
Technical Features
Technical Features
- Mounting hardware supplied so the screen can be fitted on the day
- Matched to our camera range on connector and signal format
- Sun shade or mirror body to keep the image readable in daylight
- Screen format chosen for the cab, not a single universal size
- Labelling and packaging available under your own brand
Specifications
Configuration and Specification Sheet
| Screen size | 4.3 inch |
|---|---|
| Format | Fixed screen on a pedestal stand |
| Placement | Dash top |
| Adjustment | Screen tilts on the stand |
Full electrical specification is issued per order. Sensor, resolution, lens angle, supply voltage, cable length and connector on this model are confirmed against your vehicle and your head end before production, because they are the parameters most often changed on an OEM order. Ask for the specification sheet and we will send it with the quotation.
Materials
Materials and Construction
Monitor housings are moulded, with TFT display panels and moulded sun shades or mirror bodies depending on the format. Stands are supplied with the mounting hardware. Exact panel and housing specification for a given model is confirmed before an order is placed.
Manufacturing Process
How It Is Made
Manufactured at our Guangzhou facility. Specification is fixed first, a physical sample is built and approved, components are sourced against the approved sample, the unit is assembled and sealed, then function checked and packed. Production is carried out strictly in accordance with the ISO9001 standard.
Quality Control
Quality Control Steps
- Incoming component check against the approved sample specification
- Assembly with gasket compression and cable gland made off on sealed housings
- Power up and image output check on every unit
- Infrared or assist lamp function check where the model has them
- Final visual and packaging check before carton packing
Certifications
Certifications Held on the Range
- ISO9001
- IP68
- CE
- FCC
- RoHS
- E-mark
Certificates apply to specific models and test reports. Ask for the certificate covering the exact model you are ordering rather than a general company document.
Customization
Customization Options
- Housing colour and surface finish
- Cable length made to the routed distance on your vehicle
- Connector type, 4 pin aviation or RCA, or to your drawing
- Label and silkscreen artwork under your own brand
- Retail box, inner packing and printed manual
- Carton marking and quantity per carton
Comparison
Compared With Other Products in the Range
| 4.3 Inch Stand Alone Monitor | 4.3 Inch Foldable Monitor | 7 Inch Stand Alone Monitor | |
|---|---|---|---|
| Range | Vehicle Monitors | Vehicle Monitors | Vehicle Monitors |
| Built for | Compact Pedestal Monitor for a Fixed Dash Position | Dash Monitor That Folds Flat When It Is Not in Use | 7 Inch TFT Monitor Supplied With a Remote Control |
| Primary application | Vans | Passenger cars | Trucks and rigids |
| Main advantage | No moving screen mechanism to wear out | Folds away so the dash stays clear between manoeuvres | Remote control reaches a screen mounted out of arm's reach |
If you are unsure which of these fits your vehicle, send a photo of the mounting position and we will tell you which one to order.
Use Guide
Installation and Use Guide
A short fitting sequence. The full installation guide is available in the Download Center.
- 01
Confirm the Mounting Position
Hold the 4.3 inch stand alone monitor where it will be fitted and confirm the view or the screen position works before anything is drilled or fixed.
- 02
Check the Cable Reaches
Route the full cable from the unit to the head end and confirm it reaches with slack to spare, away from exhaust heat and moving parts.
- 03
Fix the Unit
Fit the bracket, collar or stand and seal any panel entry point. Leave a drip loop below an exterior entry so water runs away from the hole.
- 04
Connect Power and Video
Make the video and power connections in dry positions, supported so no joint carries the weight of the loom.
- 05
Set and Test
Power up, set the angle or the screen position from the driver's seat, and test again after dark and with the vehicle wet.
Knowledge
Related Guides
Downloads
Documents for This Product
Explore
Related Products
Vehicle Monitors4.3 Inch Foldable MonitorDash Monitor That Folds Flat When It Is Not in Use
View Product
Vehicle Monitors7 Inch Stand Alone Monitor7 Inch TFT Monitor Supplied With a Remote Control
View Product
Vehicle CamerasMini Dome CameraCompact Interior Dome With RCA and DC Leads
View Product
Vehicle CamerasMini Backup CameraCompact Bracket Camera With Four Assist Lamps
View ProductFAQ
4.3 Inch Stand Alone Monitor FAQ
What is the MOQ on the 4.3 Inch Stand Alone Monitor?
MOQ varies by model and by how much customisation the order carries. Send your quantity and destination market and we will confirm the MOQ in writing with the quotation.
Can this product be supplied under our own brand?
Yes. OEM and ODM service covers housing colour, cable and connector specification, label artwork, printed manual and retail packaging.
Which certificates cover this product?
Our product range holds IP68, CE, FCC, RoHS and E-mark certificates, and production is carried out strictly in accordance with the ISO9001 standard. Ask for the certificate covering this exact model before shipping.
How is it packed and shipped?
Carton packing, with retail boxes and inner packing where the order calls for them. Shipment by express, air, land or sea, with sea shipments loading at Shenzhen or Guangzhou.
Can I get a sample before placing a production order?
Yes. Samples are dispatched for physical approval before production. Ask for a sample through WhatsApp or email and we will confirm the cost and the lead time.
Do you have a CAD file or drawing available?
CAD files are not published for download. Request a CAD file or a dimensioned drawing through WhatsApp or email and we will send it directly once the application is confirmed.
Next Step
Get a Quotation on the 4.3 Inch Stand Alone Monitor
Send your quantity, destination market and any customisation you need. We will come back with price, MOQ and lead time.