L6D Single Point Load Cell
Smallest single point cell in the range, 2.5 kg to 50 kg on a 250 x 350 mm platform.
Product Overview
The L6D is the low capacity end of the single point family, covering 2.5 kg to 50 kg on platforms up to 250 x 350 mm. It is the cell behind counter pricing scales and small bench scales, where the deck is compact and the division has to be fine enough for retail selling.
| Capacity | 2.5 kg to 50 kg |
|---|---|
| Accuracy classes | C3D, C3, C3G |
| Approval | OIML R60 C3 |
| Maximum platform | 250 x 350 mm |
| Output sensitivity | 2.0 ±0.2 mV/V |
| Input resistance | 409 ±6 ohm or 1065 ±15 ohm |
| Output resistance | 350 ±3 ohm or 1000 ±10 ohm |
| Corner correction | 0.02 percent of load value per 100 mm |
Category: Load Cells
Key Benefits
- Capacity from 2.5 kg for fine division retail and laboratory bench builds
- Compact 250 x 350 mm maximum platform keeps counter scales small
- Anodised aluminium with silicon adhesive sealing for kitchen and counter conditions
- Two bridge resistance options, 350 ohm and 1000 ohm class
Problems It Solves
- Cells oversized for small retail capacities, wasting resolution
- Corner errors on compact decks built around the wrong cell
- Bridge resistance mismatch with low power battery indicators
Who It Is For
- Counter and pricing scale manufacturers
- Bench scale builders in the 3 kg to 50 kg band
- Equipment makers adding a small weighing point
Application Scenarios
- Retail counter pricing scale from 6 kg to 30 kg
- Small parts counting bench in a workshop
- Portion control scale in a food preparation area
Technical Features
- Capacities 2.5, 3, 5, 6, 8, 10, 15, 20, 30, 35 and 50 kg
- Aluminium construction with parallel beam design
- Silicon adhesive sealed, surface anodised and anti-corrosion
- Integral structure for easy installation
- Maximum platform size 250 x 350 mm
Full Specification Data
These are the manufacturer figures for this model. Nothing has been rounded, averaged or filled in where the factory did not publish it.
| Capacity | 2.5/3/5/6/8/10/15/20/30/35/4/50 | |||
| Accuracy | kg | C3D | C3 | C3G |
| Approvals | OIML R60 C3 | |||
| Maximum numberof verification intervals | n max | 2500 | 3000 | 4000 |
| Minimum load cell verification interval | v min | Emax /5000 | Emax /7000 | Emax /11000 |
| Combined error | (% FS ) | ≤±0.030 | ≤±0.020 | ≤±0.015 |
| Creep | (% FS / 30min ) | ≤±0.020 | ≤±0.0167 | ≤±0.0125 |
| Temperature effect on sensitivity | (% FS / 10℃ ) | ≤±0.021 | ≤±0.0175 | ≤±0.0131 |
| Temperature effect on zero | (% FS / 10℃ ) | ≤±0.028 | ≤±0.020 | ≤±0.0127 |
| Output sensitivity | ( mv /v) | 2.0±0.2 | ||
| Input resistance | (Ω) | 409±6/1065±15 | ||
| Output resistance | (Ω) | 350±3/1000±10 | ||
| Insulation resistance | (MΩ) | ≥5000 ( 50VDC ) | ||
| Zero balance | (% FS ) | 2 | ||
| Temperature,compensated | (℃) | -10～ +40 | ||
| Temperature,operating | (℃) | -35～ +65 | ||
| Excitation,Recommended | (V) | 5～12 (DC) | ||
| Excitation,Max | (V) | 18(DC) | ||
| Safe overload | (% FS ) | 150 | ||
| Ultimate overload | (% FS ) | 300 | ||
| Corner correction | 0.02% load value/ 100mm | |||
Materials And Construction
- Anodised aluminium body
Customisation Options
- Accuracy class C3D, C3 or C3G
- 350 ohm or 1000 ohm bridge resistance
- Capacity selected from the published range
Use Guide
- Keep the platform within 250 x 350 mm or corner error will exceed the published figure
- Mount on a rigid machined block so the deck does not flex under off centre load
- Choose the 1000 ohm version where a battery powered indicator needs lower bridge current
Certification
- OIML R60 C3
How It Compares
| L6N single point cell | The L6N covers 3 kg to 100 kg on a 400 x 400 mm platform and is aimed at electronic balances. The L6D is the smaller deck option for counter and pricing scales. |
|---|---|
| L6E single point cell | The L6E starts at 50 kg with a 400 x 400 mm platform. Use the L6D below 50 kg or where the deck must stay compact. |
Often Ordered With This Model
L6N Single Point Load Cell
Single point cell aimed at electronic balances, 3 kg to 100 kg on a 400 x 400 mm platform.
View specifications →
L6E Single Point Load Cell
Mid range single point cell, 50 kg to 300 kg on a 400 x 400 mm platform, OIML approved.
View specifications →
ACS-A Price Computing Scale
Green LED price computing counter scale, 3 kg to 35 kg, packed four per carton.
View specifications →Single Point Load Cells And Platform Size Limits
Six aluminium single point families, six different platform limits. This is the number that decides the design, and it is published for every family.
How To Choose Load Cell Capacity And Accuracy Class
Capacity and accuracy class are the two numbers that decide whether a scale can be built and verified. Here is how to derive both before you commit to a design.
L6D Single Point Load Cell Questions
What is the smallest capacity available?
2.5 kg, which suits fine division retail and laboratory bench builds.
What happens if my platform is larger than 250 x 350 mm?
Corner error grows beyond the published 0.02 percent per 100 mm figure. Step up to the L6E, L6E3 or L6T depending on deck size.
Which bridge resistance should I order?
350 ohm for standard mains powered indicators, 1000 ohm class where battery life matters.
Get A Quotation For The L6D Single Point Load Cell
Tell us the capacity, accuracy class or division you need and the destination market. We will confirm availability, documentation and freight.