HM14C Column Load Cell
Hermetically welded alloy steel column cell, 10 t to 50 t, with anti reversal self aligning design.
Product Overview
The HM14C is the alloy steel column cell for heavy platform scales, vehicle testing facilities and hopper scales. Its column structure with anti reversal design and good self aligning ability is what keeps a heavy deck stable as load moves across it, and the hermetically welded body handles oil, water and corrosive media.
| Capacity | 10 t to 50 t |
|---|---|
| Accuracy classes | C2, C3, A5S, A5M |
| Output sensitivity | 1.5 ±0.004 mV/V |
| Input resistance | 700 ±7 ohm |
| Output resistance | 703 ±4 ohm |
| Excitation | 5 to 12 V DC recommended, 18 V DC maximum |
| Compensated temperature | -10 to +40 degrees C |
| Safe / ultimate overload | 150 % / 300 % of full scale |
Category: Load Cells
Key Benefits
- Column structure with anti reversal design and self aligning ability
- Hermetically welded alloy steel body for long service in harsh plant
- Accuracy classes from C2 to A5M with published n max and v min
- Straightforward installation with reliable repeat performance
Problems It Solves
- Decks that shift laterally and upset the reading
- Cells that cannot cope with oil or corrosive media in the pit
- Uncertainty about the division count a heavy scale can support
Who It Is For
- Heavy platform scale manufacturers
- Vehicle testing facility builders
- Hopper and silo weighing integrators at 10 t per leg and above
Application Scenarios
- Heavy platform scale for steel or coil weighing
- Vehicle testing rig with fixed weighing points
- Silo leg weighing at 20 t to 50 t
Technical Features
- Capacities 10, 20, 25, 30, 40 and 50 t
- Alloy steel construction, hermetically welded
- Oil-proof, waterproof and resistant to corrosive gas and media
- Column structure with anti reversal and self aligning behaviour
- Accuracy classes C2, C3, A5S and A5M
Full Specification Data
These are the manufacturer figures for this model. Nothing has been rounded, averaged or filled in where the factory did not publish it.
| ◆HM14C load cells are available in the capacities 10t to 50t . ◆Alloy steel construction,hermetically welded,oil-proof,waterproof and anti-corrosive gas and medium making it suitable for all kinds of environments. ◆Column structure,anti-reversal design,good self-aligning ability, suitable for electronic platform scales,automobile testing facilitis , hopper scales and other electronic weighing devices. | Features ◆Capacity 10t to 50t . ◆High accuracy. ◆Alloy steel construction. ◆Easy installation and reliable performance. |
| Capacity | t | 10/20/25/30/40/50 | |||
| Accuracy class | C2 | C3 | A5S | A5M | |
| Maximum number of verification intervals | n max | 2000 | 3000 | 5000 | 5000 |
| Minimum load cell verification interval | v min | Emax/5000 | Emax/10000 | Emax/15000 | Emax /15000 |
| Combined error | (%FS) | ≤± 0.030 | ≤± 0.020 | ≤± 0.018 | ≤± 0.026 |
| Creep | (%FS/30min) | ≤± 0.024 | ≤± 0.016 | ≤± 0.012 | ≤± 0.017 |
| Temperature effect on sensitivity | (%FS/10℃) | ≤± 0.017 | ≤± 0.011 | ≤± 0.009 | ≤± 0.013 |
| Temperature effect on zero | (%FS/10℃) | ≤± 0.023 | ≤± 0.015 | ≤± 0.010 | ≤± 0.014 |
| Output sensitivity | (mv/v) | 1.5 ± 0.004 | |||
| Input resistance | ( Ω ) | 700 ± 7 | |||
| Output resistance | ( Ω ) | 703 ± 4 | |||
| Insulation resistance | (M Ω ) | ≥ 5000(50VDC) | |||
| Zero balance | (%FS) | 1.0 | |||
| Temperature, compensated | ( ℃) | -10～+40 | |||
| Temperature,allowed | ( ℃) | -35～+65 | |||
| Excitation, Recommended | (V) | 5～12(DC) | |||
| Excitation,Max | (V) | 18(DC) | |||
| Safe overload | (%FS) | 150 | |||
| Ultimate overload | (%FS) | 300 | |||
Materials And Construction
- Alloy steel body
- Hermetically welded sealing
Customisation Options
- Accuracy class selected at order
- Capacity per leg load calculation
- Cable length on request
Use Guide
- Calculate leg load including deck dead weight before selecting capacity
- Use the self aligning mounting hardware rather than bolting the cell rigidly
- Keep all cells in one installation on the same accuracy class and sensitivity
Certification
- Accuracy classes C2 to A5M
How It Compares
| BM14C stainless column cell | Same column structure and capacity concept, but the BM14C is stainless steel with OIML R60 C3 and C4 approval and starts at 0.5 t. |
|---|---|
| ZSF column cell | The ZSF family is IP68 rated with two bridge resistance options; the HM14C publishes a wider accuracy class table and uses 1.5 mV/V output. |
Often Ordered With This Model
BM14C Stainless Steel Column Load Cell
Stainless steel column cell from 0.5 t to 50 t with OIML R60 C3 and C4 approval.
View specifications →
ZSF And ZSFY Column Load Cell
IP68 column cell for weighbridges and heavy platforms, 10 t to 50 t, two bridge resistance options.
View specifications →
HM9B Double Shear Beam Load Cell
Hermetically welded double shear beam cell for truck and railway scales, 10 t to 50 t.
View specifications →OIML R60 Accuracy Classes Explained For Scale Builders
Every load cell datasheet in this catalogue is a table of accuracy classes. This is how to read the columns and turn them into a decision.
Shear Beam S Type And Column Load Cells Compared
Four structures cover nearly every weighing build. Choosing the wrong one creates mounting problems that no amount of calibration will fix.
HM14C Column Load Cell Questions
What output sensitivity does the HM14C use?
1.5 ±0.004 mV/V, which is lower than the 2 mV/V and 3 mV/V families. Confirm your indicator can resolve it at the capacity you are using.
Is it approved for trade use?
The published table lists accuracy classes C2, C3, A5S and A5M. For an installation that must be verified, tell us the market and division count and we will confirm which class and documentation apply.
Can it be used outdoors?
It is hermetically welded and resistant to water, oil and corrosive media, which suits outdoor and pit installations.
Get A Quotation For The HM14C Column Load Cell
Tell us the capacity, accuracy class or division you need and the destination market. We will confirm availability, documentation and freight.