Strong Power 48W 72W AC220V LED Wall Washer
The FD-LW050L72 is a 72W wall washer luminaire designed for architectural facade lighting projects requiring consistent, even illumination across large surfaces. It features a die-casting aluminium housing for structural rigidity and thermal management, with a CREE LED chip for reliable light output. The fixture operates on AC85-265V, allowing direct connection to standard building mains without additional voltage conversion. It is rated IP65, suitable for outdoor installation on building facades exposed to rain and dust. The slim profile and linear form make it ideal for mounting along building edges, corners, or continuous wall sections.
| Model | FD-LW050L72 |
|---|---|
| Power | 72W |
| Input Voltage | AC85-265V |
| IP Rating | IP65 |
| Dimension | L1000 x W70 x H46 mm(Support H77 mm) |
| Material | Die-casting aluminium |
| LED Chip | CREE |
| Driver | Included |
| Warranty | 3 Years |
Key Benefits
- 72W power delivers high output for large facade surfaces without requiring multiple fixtures
- AC85-265V input allows direct connection to standard building mains, reducing need for extra power supplies
- IP65 rating ensures protection against water jets and dust ingress, suitable for exterior wall mounting
- Die-casting aluminium body provides strong mechanical support and effective heat dissipation
- CREE LED chip ensures stable light output and long operational life
- Slim 46mm depth allows flush mounting on walls without protruding into walkways or creating shadows
Application Scenarios
- Illuminating continuous wall sections on commercial building facades during evening hours
- Highlighting textured concrete, brick, or stone surfaces on high-rise or low-rise structures
- Lighting building corners and edges to define architectural form at night
- Installing along building perimeters in urban or mixed-use developments
- Mounting on façades in coastal or high-rainfall areas where weather resistance is critical
Who It Is For
- Facade lighting contractors installing wall washers on commercial and public buildings
- Lighting designers specifying uniform wash lighting for architectural expression
- Electrical wholesalers supplying LED wall washers for large-scale projects in Europe and the Middle East
- Brand owners sourcing OEM wall washers under their own label with custom logo printing
Problems It Solves
- Low-power wall washers require more fixtures to cover large surfaces, increasing installation and wiring complexity
- Non-IP65 rated fixtures fail prematurely when exposed to rain and wind-driven moisture
- Poor heat dissipation in plastic or thin metal housings reduces LED lifespan and light output
- Inconsistent light distribution from low-quality drivers leads to visible hot spots or dim zones
- Fixtures with deep profiles create shadows or obstruct walkways when mounted close to walls
Technical Features
- 72W power with CREE LED chip for high and stable light output
- AC85-265V input voltage range for compatibility with standard building mains
- IP65 rating for protection against water jets and dust ingress
- Die-casting aluminium housing for strength and heat dissipation
- Slim 46mm depth with optional 77mm height for mounting flexibility
- Driver supplied as 'DONE' – integrated into the fixture, ready for direct connection
Materials
- Die-casting aluminium body for structural strength and heat transfer
- CREE LED chip for consistent lumen output and longevity
- Integrated driver (DONE) for simplified installation and reduced wiring complexity
Manufacturing Process
- Die-casting of aluminium housing with precision machining
- Assembly of CREE LED modules onto the driver board
- Integration of the driver (DONE) into the fixture housing
- Sealing and gasket fitting to achieve IP65 rating
- Final power testing and ageing run before packaging
Quality Control
- Incoming inspection of CREE LED chips and driver components
- IP65 sealing verification using spray test before final closure
- Powered ageing test for 24 hours before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Driver can be supplied fitted (DONE) or omitted when centralised drivers are used
- OEM and ODM production available for buyers selling under their own brand
- Dimensions can be adjusted within the same model range for specific mounting needs
Compared With the Alternatives
Low-power wall washer (48W)
Higher output per fixture reduces the number of units needed on large surfaces
Plastic-bodied wall washer
Die-casting aluminium offers better heat dissipation and longer lifespan under outdoor conditions
Fixture with external driver
Integrated driver (DONE) simplifies wiring and reduces connection points on site
Use Guide
- Mount the fixture on a solid wall surface with appropriate brackets and fasteners
- Ensure the mounting surface is clean and dry before installation
- Connect the fixture directly to AC85-265V mains; no additional voltage conversion required
- Avoid blocking the front lens during installation to maintain light distribution
- Clean the lens periodically to maintain consistent light output, especially in dusty or polluted areas
Strong Power 48W 72W AC220V LED Wall Washer Questions
What is the input voltage range for this wall washer?
The fixture operates on AC85-265V, compatible with standard building mains across Europe and the Middle East.
Is the driver included in the fixture?
Yes. The driver is supplied as 'DONE' – integrated into the fixture and ready for direct connection.
What does IP65 mean for outdoor use?
IP65 means the fixture is protected against dust and water jets, suitable for outdoor wall mounting in rain and high-wind conditions.
Can I install this on a curved or textured wall?
Yes, but ensure the mounting surface is stable and the fixture is secured properly to avoid vibration or detachment.
What is the warranty period?
This model carries a 3 year warranty. Across the FENGDIAN range, warranty is 2 to 5 years depending on the product.
Can I order a sample before placing a bulk order?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship in 3-5 days.
How long does mass production take?
Mass production is typically 1-2 weeks, and goods normally ship by DHL, UPS, FedEx or TNT with 3-5 days in transit, or by air or sea freight.
Related Products
12W Wall Lighting Outdoor LED Point Light
View Specification
12W Outdoor LED Wall Lamp LED Point Light
View Specification
DC24V Silicone LED Strip Light
View Specification
54*3W RGB DMX LED Stage Flood Light
View Specification
Outdoor Lighting Door Frame Window Table Lamp
View Specification
12W LED Glass Wall Light Guide Plate 12W Acrylic LED Linear Light
View SpecificationRequest a Quotation for Strong Power 48W 72W AC220V LED Wall Washer
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.