12W Outdoor LED Wall Lamp LED Point Light
The FD-PL070X12 is a 12W outdoor LED wall lamp designed for architectural facade and landscape lighting projects. It is built with an aluminium body and features an IP65 rating, making it suitable for exposed wall mounting in exterior environments. The fixture operates on AC85-265V and uses a CREE LED chip. It is a simple on/off system with no dimming or control functions. The compact size and clean design allow it to be used as a point light to highlight architectural details, textures, or landscape features without drawing attention to the fixture itself.
| Model | FD-PL070X12 |
|---|---|
| Power | 12W |
| Input Voltage | AC85-265V |
| IP Rating | IP65 |
| Dimension | L200 x W200 x H125 mm |
| Material | Aluminium |
| LED Chip | CREE |
| Driver | Included |
| Control System | ON/OFF |
| Warranty | 3 Years |
Key Benefits
- IP65 rating ensures protection against dust and water jets, suitable for exposed wall mounting in outdoor environments
- AC85-265V input supports standard mains voltage across Europe and the Middle East without voltage conversion
- CREE LED chip provides reliable light output with consistent performance over time
- Aluminium body offers good heat dissipation and structural rigidity for long-term outdoor use
- Compact L200*W200*H125mm dimensions allow discreet installation on facades and walls
- On/off system simplifies wiring and integration into existing control circuits
Application Scenarios
- Highlighting textured stone or concrete wall surfaces in building facades
- Accentuating architectural details such as cornices, joints, or recessed panels
- Marking transitions between building sections or vertical elements in landscape schemes
- Installing in exposed wall positions in commercial or residential buildings in the Middle East and Europe
- Using as a point light in multi-unit facade lighting projects where uniformity and simplicity are required
Who It Is For
- Facade and landscape lighting contractors installing point lights on exterior walls
- Lighting designers specifying simple, reliable fixtures for accent lighting on buildings
- Electrical wholesalers supplying outdoor LED wall lamps for architectural projects
- Brand owners sourcing OEM point lights under their own label for export to Europe and the Middle East
Problems It Solves
- Fixtures with lower IP ratings fail in outdoor wall positions exposed to rain and dust
- Inconsistent light output from non-branded or untested LED chips leads to uneven appearance in projects
- Poor heat dissipation in plastic or thin metal bodies shortens fixture lifespan in outdoor conditions
- Complex control systems are unnecessary for simple accent lighting, adding cost and failure points
- Lack of standard voltage input limits use across different regions without additional components
Technical Features
- Aluminium body for heat dissipation and structural durability
- IP65 rating for protection against dust and water jets from any direction
- CREE LED chip for consistent light output and long life
- AC85-265V input voltage range to match standard mains supply in Europe and the Middle East
- On/off system with no dimming or control functions
- Compact L200*W200*H125mm size for discreet wall mounting
Materials
- Aluminium body for heat dissipation and structural strength
- CREE LED chip for consistent light output and longevity
- IP65-rated sealing components to prevent dust and water ingress
Manufacturing Process
- Aluminium body machining and surface finishing
- LED board assembly with CREE chips and integrated driver
- Sealing and gasket fitting to achieve IP65 rating
- Final inspection and powered testing before packing
Quality Control
- Incoming inspection of CREE LED chips and driver components
- IP65 sealing check using pressure or spray test before final closure
- Powered ageing test under normal operating conditions before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Supplied with built-in driver as standard, no option to omit
- OEM and ODM production available for buyers selling under their own brand
- Available in standard finish; custom finishes not specified in FACTS
Compared With the Alternatives
Plastic-bodied wall lamp
More durable and better heat dissipation, but higher cost and heavier
LED wall washer with dimming
Simpler on/off system avoids unnecessary control wiring and cost
Low-voltage wall lamp (e.g. 12V)
Uses standard AC mains input, eliminating need for transformer or low-voltage wiring
Use Guide
- Mount the fixture on a solid wall surface with appropriate fixings to support the weight
- Ensure the mounting location is free from obstructions that could block the light beam
- Use the provided gaskets and seals to maintain IP65 protection during installation
- Do not attempt to modify the driver or wiring; the fixture is designed for direct mains connection
- Clean the lens periodically with a soft cloth to maintain light output and appearance
12W Outdoor LED Wall Lamp LED Point Light Questions
What is the input voltage for this wall lamp?
The fixture operates on AC85-265V, which covers standard mains voltage in Europe and the Middle East.
Is the driver included?
Yes. The driver is built-in and cannot be omitted. The model is specified as 'DRIVE: DONE'.
What is the IP rating and what does it mean?
The fixture has an IP65 rating, meaning it is dust-tight and protected against water jets from any direction.
Can I install this on a wall exposed to rain?
Yes. The IP65 rating makes it suitable for outdoor wall mounting in exposed positions, including areas with frequent rain.
What is the warranty period?
This model carries a 3 year warranty. Across the FENGDIAN range, warranty is 2 to 5 years depending on the product.
Can I order a sample before placing a bulk order?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship within 3-5 days.
How long does mass production take?
Mass production typically takes 1-2 weeks, and goods are shipped via DHL, UPS, FedEx, or TNT with 3-5 days in transit, or by air or sea freight.
Related Products
12W Wall Lighting Outdoor LED Point Light
View Specification
DC24V Silicone LED Strip Light
View Specification
54*3W RGB DMX LED Stage Flood Light
View Specification
Outdoor Lighting Door Frame Window Table Lamp
View Specification
12W LED Glass Wall Light Guide Plate 12W Acrylic LED Linear Light
View Specification
DMX RGB 15W LED Point Light for Building Facade Lighting
View SpecificationRelated Guides
Request a Quotation for 12W Outdoor LED Wall Lamp LED Point Light
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.