Outdoor Lighting Door Frame Window Table Lamp
The FD-WT080L12 is a 12W linear LED fixture designed for facade lighting applications where uniform, 360-degree illumination is needed around door frames, window edges, or table edges. It is built for outdoor use with an IP65 rating, making it suitable for exposed positions on building exteriors. The fixture uses die-casting aluminium for structural integrity and heat dissipation, with a PMMA lens for light diffusion. It operates on AC85-265V or DC24V, allowing integration into both mains and low-voltage systems. The CREE LED chip ensures consistent output, and the system is controlled by a simple ON OFF switch. The model is available in two dimensions to suit different mounting conditions.
| Model | FD-WT080L12 |
|---|---|
| Power | 12W |
| Input Voltage | AC85-265V/DC24V |
| IP Rating | IP65 |
| Material | Die-casting Aluminium+PMMA LENS |
| LED Chip | CREE |
| Driver | FENGDIAN/WITHOUT |
| Colour Temperature | 2800-6500K/RGB |
| Beam Angle | 360° |
| Control System | ON OFF |
| Type A | L118*W61*H100mm |
| Type B | L120*W50*H170mm |
| Warranty | 3 Years |
Key Benefits
- 360-degree beam angle provides uniform light around the entire fixture perimeter
- IP65 rating allows installation on exposed building edges without weather damage
- AC85-265V or DC24V input supports both mains and low-voltage site wiring
- Die-casting aluminium body ensures durability and effective heat transfer
- PMMA lens offers consistent light diffusion and resistance to UV degradation
- CREE LED chip delivers reliable performance with consistent colour output
- Two size variants (TYPE A and TYPE B) allow fitment on different frame or table profiles
Application Scenarios
- Highlighting door frames and window edges on commercial building facades at night
- Illuminating outdoor table edges in hotel and restaurant terraces
- Accentuating architectural details on entrance canopies and covered walkways
- Lighting vertical edges on facade panels where even glow is required
- Installing on exposed building edges in coastal or high-wind areas
Who It Is For
- Facade lighting contractors installing linear lights on building edges
- Lighting designers specifying uniform edge lighting for architectural features
- Electrical wholesalers supplying linear LED fixtures for outdoor projects
- Brand owners sourcing OEM linear lights under their own label
Problems It Solves
- Traditional fixtures with limited beam angles leave dark spots around corners
- Non-IP65 rated lights fail when exposed to rain and wind on building edges
- Projects requiring both mains and low-voltage systems need different fixture types
- Poor heat dissipation in plastic-bodied fixtures leads to early LED failure
- Lack of size options forces contractors to use non-matching fixtures on different profiles
Technical Features
- 360-degree beam angle for full circumferential light distribution
- IP65 rating for protection against dust and water jets
- AC85-265V or DC24V input for compatibility with multiple site power systems
- Die-casting aluminium body for structural strength and heat dissipation
- PMMA lens for even light diffusion and long-term clarity
- CREE LED chip for consistent lumen output and colour stability
- Driver supplied by FENGDIAN or omitted for site-supplied drivers
Materials
- Die-casting aluminium body for structural strength and heat dissipation
- PMMA lens for light diffusion and resistance to UV and impact
- Internal components protected against moisture and dust with IP65 sealing
Manufacturing Process
- Die-casting of aluminium body with surface finishing
- PMMA lens cutting and polishing for clarity
- LED board assembly with CREE chips
- Driver integration or omission based on order
- IP65 sealing and gasket fitting
- Final inspection and powered test before packing
Quality Control
- Incoming inspection of CREE LED chips and drivers
- IP65 sealing check before final closure
- Powered ageing test for 24 hours before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Driver supplied with fixture or omitted based on site requirements
- AC85-265V or DC24V input version available
- OEM and ODM production for buyers selling under their own brand
Compared With the Alternatives
Linear light with 180° beam angle
Provides full coverage around the edge, eliminating dark zones at corners
Plastic-bodied linear light
Die-casting aluminium offers better heat dissipation and longer life in outdoor conditions
Fixture without IP65 rating
IP65 ensures reliable operation in rain and wind, reducing field failures
Use Guide
- Mount the fixture flush or recessed into the frame edge, ensuring the lens is not obstructed
- Use the correct dimension (TYPE A or TYPE B) to match the profile of the door frame or table edge
- Ensure the wiring is protected from moisture and mechanical damage at the connection point
- For DC24V systems, verify cable size to prevent voltage drop over long runs
- Clean the PMMA lens periodically with mild detergent to maintain light output
Outdoor Lighting Door Frame Window Table Lamp Questions
What are the two size options for this fixture?
TYPE A is L118 x W61 x H100 mm and TYPE B is L120 x W50 x H170 mm. Choose based on the profile of the frame or table edge.
Can it run on 24V DC?
Yes. The fixture supports both AC85-265V and DC24V input, so it can be used in low-voltage systems.
Is the driver included?
It can be supplied with the driver or without. The option is selected during order placement.
Is IP65 sufficient for outdoor use?
Yes. IP65 protects against dust and water jets, making it suitable for exposed positions on building facades.
What is the warranty?
This model carries a 3 year warranty. Across the FENGDIAN range, warranty is 2 to 5 years depending on the product.
Can I order a sample?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship in 3-5 days.
How long does mass production take?
Mass production is typically 1-2 weeks, and goods normally ship by DHL, UPS, FedEx or TNT with 3-5 days in transit, or by air or sea freight.
Related Products
12W Wall Lighting Outdoor LED Point Light
View Specification
12W Outdoor LED Wall Lamp LED Point Light
View Specification
DC24V Silicone LED Strip Light
View Specification
54*3W RGB DMX LED Stage Flood Light
View Specification
12W LED Glass Wall Light Guide Plate 12W Acrylic LED Linear Light
View Specification
DMX RGB 15W LED Point Light for Building Facade Lighting
View SpecificationRelated Guides
Request a Quotation for Outdoor Lighting Door Frame Window Table Lamp
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.