Die-casting aluminium Material light LED Flood Lighting
The FD-S010S400 is a 400W die-cast aluminium LED flood light designed for facade and architectural lighting projects. The fixture uses a high-quality aluminium housing for efficient heat dissipation and long-term stability in outdoor environments. It is equipped with CREE LED chips and DONE DRIVE for reliable performance under continuous operation. The IP65 rating ensures protection against dust and water jets, making it suitable for exposed mounting on building exteriors. The 25cm output cable allows flexible wiring connections during installation.
| Model | FD-S010S400 |
|---|---|
| Power | 400W |
| Input Voltage | AC85-265v |
| IP Rating | IP65 |
| Dimension | 690 x 460 x 208 mm |
| Output Cable | 25cm |
| Warranty | 3 Years |
Key Benefits
- Die-cast aluminium housing provides robust mechanical strength and effective heat transfer for long-term operation
- CREE LED chips deliver consistent light output with stable performance over time
- DONE DRIVE ensures stable current regulation and reliable operation under varying input voltages
- IP65 rating protects against dust ingress and water jets, suitable for exposed outdoor mounting
- 25cm output cable allows flexibility in wiring routing during installation
- 400W power level delivers high luminous output for large-scale facade illumination
Application Scenarios
- Illuminating large building facades in commercial and public architecture projects
- Highlighting architectural details such as cornices, columns, and textured surfaces
- Providing uniform flood lighting on urban and industrial building exteriors
- Installing on exposed mounting brackets where weather resistance is required
Who It Is For
- Facade lighting contractors specifying flood lights for building exteriors
- Lighting designers integrating high-power fixtures into architectural lighting schemes
- Electrical wholesalers supplying LED flood lights for large-scale projects in Europe and the Middle East
- Brand owners sourcing OEM flood lights under their own label with custom logo printing
Problems It Solves
- Poor heat dissipation in plastic or thin metal housings leads to early LED degradation
- Inconsistent performance from low-quality drivers causes flickering or premature failure
- Lack of dust and water protection in outdoor fixtures leads to internal corrosion and failure
- Short cable length limits wiring flexibility during installation on complex building facades
Technical Features
- Die-cast aluminium housing for structural integrity and heat dissipation
- CREE LED chip for high lumen output and long operational life
- DONE DRIVE for stable current regulation and reliable operation
- IP65 rating for protection against dust and water jets
- 25cm output cable for flexible wiring during installation
- AC85-265V input for compatibility with standard mains voltage across regions
Materials
- Die-cast aluminium housing for structural strength and heat dissipation
- CREE LED chips for high-efficiency light output
- DONE DRIVE for stable power regulation
- Weather-resistant cable and connectors for outdoor use
Manufacturing Process
- Die-casting of aluminium housing with precision moulding
- Surface treatment and finishing for corrosion resistance
- Assembly of CREE LED modules and DONE DRIVE
- Sealing of electrical connections to achieve IP65
- Final testing under operating conditions before packing
Quality Control
- Incoming inspection of CREE LED chips and DONE DRIVE units
- IP65 sealing verification using pressure and spray tests
- Functional testing under full power for 24 hours before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Driver can be supplied with the fixture or omitted when site-supplied drivers are used
- AC85-265V input version standard, no other voltage options listed
- OEM and ODM production available for buyers selling under their own brand
Compared With the Alternatives
Plastic-bodied flood light
More durable and heat-resistant, but higher initial cost
Low-power LED flood light (under 200W)
Higher output for large facades, but requires larger mounting and wiring
Fixture with no driver included
Requires site-supplied driver, but reduces cost and allows central control
Use Guide
- Mount the fixture on a stable bracket with proper alignment for the target area
- Ensure the input voltage is within AC85-265V to avoid driver or LED damage
- Route the 25cm output cable to avoid sharp bends or mechanical stress
- Clean the lens periodically to maintain light output, especially in dusty or polluted areas
- Inspect the sealing gaskets annually to maintain IP65 performance
Die-casting aluminium Material light LED Flood Lighting Questions
What is the input voltage range for this flood light?
The input voltage is AC85-265V, suitable for standard mains supply across Europe and the Middle East.
Is the driver included in the fixture?
Yes, the fixture is supplied with a DONE DRIVE. It can also be omitted if site-supplied drivers are used.
What is the IP rating and what does it mean?
The IP65 rating means the fixture is protected against dust ingress and water jets, suitable for outdoor mounting on building facades.
Can I get a sample before placing a bulk order?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship within 3-5 days.
How long does mass production take?
Mass production typically takes 1-2 weeks, and goods are shipped via DHL, UPS, FedEx, or TNT with 3-5 days in transit.
What is the warranty period?
This model carries a 3-year warranty. Across the FENGDIAN range, warranty is 2 to 5 years depending on the product.
Can I have my logo printed on the fixture?
Yes. Customer logo printing is available, and the design is confirmed against an approved sample before production begins.
Related Products
12W Wall Lighting Outdoor LED Point Light
View Specification
12W Outdoor LED Wall Lamp LED Point Light
View Specification
DC24V Silicone LED Strip Light
View Specification
54*3W RGB DMX LED Stage Flood Light
View Specification
Outdoor Lighting Door Frame Window Table Lamp
View Specification
12W LED Glass Wall Light Guide Plate 12W Acrylic LED Linear Light
View SpecificationRequest a Quotation for Die-casting aluminium Material light LED Flood Lighting
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.