2 Heads PCB CNC Routing Machine R12 Series
Two head routing machine for small batch board routing. A bigger size table can be supplied to suit your panel format.
Watch this machine running on video →
Send a drawing or a drill file by WhatsApp or email. There is no form on this site.
Product Overview
DLCNC aims to provide customers with a total solution that embodies professional cutting edge and timely service. The circuit board manufacturing routing machine was independently developed by DLCNC in China.
The R12 carries two routing spindles driven from one Z axis. Routing does not need the very high spindle speed that drilling requires so one motor serving both spindles keeps the machine cost effective while the granite class base and imported linear motion parts keep the cut quality repeatable.
Technical Features
- Customized to the panel format you actually run
- Cost effective two spindle layout
- Steady cutting behaviour on profile and slot work
- Easy going operation interface
Key Benefits
Match the table to your panel
The 680mm by 730mm processing area covers common production panels and a larger table can be supplied on request.
Hold the profile tolerance
Routing accuracy of ±0.05mm with repeatability of ±0.005mm keeps the board outline inside the drawing.
Keep the entry cost down
Two spindles from one Z axis give a lower machine price than an independent Z axis layout while covering small batch work.
Train operators quickly
The operation interface is designed to be easy going so a new operator reaches production output faster.
Specifications
Copied from the DLCNC machine documentation without change.
| Number of Z axis | 1 |
| Number of Spindles | 2 |
| Processing Area of Each Axis | 680mm×730mm |
| XYZ axis Movement Area | 700mm×825mm×55mm |
| Drilling Diameter | φ0.5-φ6.35mm |
| Routing Diameter | φ0.6-φ6.35mm |
| XY axis max movement speed | 28/min |
| Z axis max movement speed | 25/min |
| Positioning Accuracy | ±0.01mm |
| Repeatability Accuracy | ±0.005mm |
| Routing Accuracy | ±0.05mm |
| Power Supply Requirement | 3PH-AC380V+PE 50/60Hz 4KVA |
| Compressed Air Requirement | 0.7-0.8MPa |
| Cooling Water Temperature | 18℃-25℃ |
| Working Condition Temperature | 20℃-25℃ |
| Humidity | 50%-75% |
Who It Is For
- PCB fabricators depanelling rigid boards after solder mask and surface finish
- Assembly houses separating assembled panels into single boards
- Shops producing slots cut outs and irregular board frames
- Buyers who need a wider or longer work table than a standard model provides
Problems It Solves
- Manual pin insertion pushing up labour cost and introducing position error
- Output rate limited because a single spindle routes one board at a time
- Standard table size too small for the panel format actually used in the plant
- Cut depth on partial depth routing that cannot be held without depth control
Comparison With Other Models
Same category different configuration. Where a figure is not published in the documentation the cell shows a dash.
| Item | 2 Heads PCB CNC Routing Machine | 4 Heads PCB CNC Routing Machine | 6 Heads PCB CNC Routing Machine |
|---|---|---|---|
| Processing Area of Each Axis | 680mm×730mm | 520mm×650mm | 580mm×730mm |
| Number of Spindles | 2 | 4 | 6 |
| Drilling Diameter | φ0.5-φ6.35mm | φ0.5-φ6.35mm | φ0.5-φ6.35mm |
| Routing Diameter | φ0.6-φ6.35mm | φ0.6-φ6.35mm | φ0.6-φ6.35mm |
| XY axis max movement speed | 28/min | 28/min | 35/min |
| Z axis max movement speed | 25/min | 25/min | - |
| Routing Accuracy | ±0.05mm | ±0.05mm | ±0.05mm |
Use and Maintenance Guide
Before The Shift
Check appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf. Run the spindle at low speed for at least ten minutes.
Every Week
Cut the power first. Clean inside and outside lubricate the worktable clean and lubricate the collet and sort the computer cables. About one hour on the night shift.
Every Month
Add guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter. About one and a half hours with repair staff present.
When Accuracy Drifts
Work the four factors in order. Equipment condition then technics parameters then tool status then operator method.
Quality Control and Certification
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
Related Products
4 Heads PCB CNC Routing Machine
Four head routing machine independently developed by DLCNC for steady production routing of circuit boards.
View Specifications →
6 Heads PCB CNC Routing Machine
Six head routing machine for volume batch board routing. It is the model chosen when the routing station has to keep pace with the rest...
View Specifications →
CNC PCB Drilling Routing Machine
The PCB CNC drilling and routing machine focuses on offering a high precision drilling and routing choice on one platform. This model i...
View Specifications →Related Applications Solutions and Guides
PCB Depaneling and Profiling
Routing is where the panel becomes the product. DLCNC machines are applied in the precision drilling and milli...
Read More →Prototype and Small Batch PCB
A prototype shop changes job more often than it changes shift. The machine that suits it is not the fastest on...
Read More →Routing and Depaneling Solution
A routing station is sized by batch size not by ambition. Six spindles on small batch work idle. Two spindles ...
Read More →Machine Customization
DLCNC is a demand oriented corporation. The vision is to turn a customer need into a real machine and a large ...
Read More →How To Choose a CNC Drilling and Routing Machine
CNC machines are vital in PCB processing. These are the points DLCNC engineers work through with a buyer befor...
Read More →Auto Pin Insert Function for PCB Routing Machines
Traditional pin insert is done by hand manually. It pushes up labour cost and it has an accuracy problem. DLCN...
Read More →2 Heads PCB CNC Routing Machine FAQ
What board size can the R12 process
What is the difference between R12 R12K and R12KT
Can this machine drill as well as route
What utilities does the machine need
Ready To Talk About the 2 Heads PCB CNC Routing Machine
Send the board format the hole or slot geometry and the output you need. You will get an engineer reply not a sales template.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.