D4X PCB Drilling Machine
Linear motor drive with high precision linear scale and guide on a granite marble base frame. The D4X is the volume drilling configuration in the DLCNC range.
Send a drawing or a drill file by WhatsApp or email. There is no form on this site.
Product Overview
The D4X applies to printed circuit board drilling and is economical accurate and quick. The granite base frame gives good rigidity and good vibration absorption so the bed is not inclined to distortion.
In the four series overview the D4X is described as an independent Z axis machine with linear motor on XY and ball screw drive on Z. It reaches the same 80m/min XY feed as the D3X while running 30m/min on the Z axis.
Configuration
- XYZ axis linear motor
- High precision linear scale and guide
- Granite marble base frame
Technical Features
- XYZ independent structure with linear motor to improve the drilling speed
- Quick drill function reduces the waiting time
- QIC function improves the drilling accuracy and speed
- Smart gripper design picks and loads efficiently and precisely
- 220pcs tooling capacity for the spindle to handle
- Automatic tooling length and diameter check
- Contacted tooling broken detection greatly reduces reaction time
- Water cooling system with real time monitoring on cooling temperature and water flow to protect the spindles
Key Benefits
Fast traverse on a proven Z drive
80m/min on the XY axes with the Z axis at 30m/min.
Three build sizes
D42 D44 and D46 follow the spindle count so the machine is matched to the drilling load.
Full tooling automation
220pcs capacity with automatic tool length and diameter check and contacted broken tool detection.
Granite base frame
Good rigidity good vibration absorption and a bed that is not inclined to distortion.
Specifications
Copied from the DLCNC machine documentation without change.
| Processing Area of Each Axis | 680mm×680mm |
| Spindle Speed | 160-200krpm |
| Drilling Diameter | φ0.15-φ6.35mm |
| XY axis max movement speed | 80/min |
| Z axis max movement speed | 30/min |
| Positioning Accuracy | ±0.01mm |
| Repeatability Accuracy | ±0.005mm |
| Drilling Accuracy | ±1mil |
| Power Supply Requirement | 3PH-AC380V+PE 50/60Hz 4KVA |
| Compressed Air Requirement | 35L/min per axis air pressure 2Kg/cm |
| Cooling Water Temperature | 18℃-25℃ |
| Working Condition Temperature | 20℃-25℃ |
| Humidity | 50%-75% |
Who It Is For
- PCB fabricators drilling multilayer rigid boards in volume
- Quick turn and prototype shops that change tool sets many times per shift
- In house PCB departments inside electronics manufacturers
- Machine dealers and service partners covering the PCB equipment market
Problems It Solves
- Hole location accuracy drifting outside the CPK window the customer has to report
- Long waiting time between drill cycles caused by slow tool change and tool checking
- Broken drill bits discovered only after a whole panel stack is scrapped
- Spindle damage caused by cooling water that is not monitored in real time
Comparison With Other Models
Same category different configuration. Where a figure is not published in the documentation the cell shows a dash.
| Item | D4X PCB Drilling Machine | D1X PCB Drilling Machine | D2X PCB Drilling Machine |
|---|---|---|---|
| Processing Area of Each Axis | 680mm×680mm | 580mm×680mm | 680mm×680mm |
| Spindle Speed | 160-200krpm | 160krpm | 160-200krpm |
| Drilling Diameter | φ0.15-φ6.35mm | φ0.3-φ6.35mm | φ0.15-φ6.35mm |
| XY axis max movement speed | 80/min | 28-35m/min | 50/min |
| Z axis max movement speed | 30/min | - | 30/min |
| Drilling Accuracy | ±1mil | - | ±1mil |
Use and Maintenance Guide
Before The Shift
Check appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf. Run the spindle at low speed for at least ten minutes.
Every Week
Cut the power first. Clean inside and outside lubricate the worktable clean and lubricate the collet and sort the computer cables. About one hour on the night shift.
Every Month
Add guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter. About one and a half hours with repair staff present.
When Accuracy Drifts
Work the four factors in order. Equipment condition then technics parameters then tool status then operator method.
Quality Control and Certification
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
Related Products
D3X PCB Drilling Machine
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
View Specifications →
D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves th...
View Specifications →
D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC dr...
View Specifications →Related Applications Solutions and Guides
Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechan...
Read More →PCB Depaneling and Profiling
Routing is where the panel becomes the product. DLCNC machines are applied in the precision drilling and milli...
Read More →Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how ...
Read More →Spare Parts and Maintenance
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance l...
Read More →Ball Screw and Linear Motor Drives Compared
The drive train is the single biggest difference between the four DLCNC drilling series. This is what changes ...
Read More →PCB Drilling Machine Maintenance Guideline
This maintenance guideline covers the PCB board drilling machine as a CNC process centre. It also applies to t...
Read More →D4X PCB Drilling Machine FAQ
What do D42 D44 and D46 mean
How does the D4X compare with the D3X
Which spindle speed range does the machine run
What cooling does the machine need
Ready To Talk About the D4X PCB Drilling Machine
Send the board format the hole or slot geometry and the output you need. You will get an engineer reply not a sales template.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.