Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechanical CNC drilling machines. Which machine sits in that station decides both the final product quality and the cost per panel.
Industry Pain Points
- Higher density smaller hole size and more layers push the hole diameter below what an older machine can hold
- Hole location accuracy that drifts outside the CPK window the customer audits
- Drilling time dominating the process cycle so the whole plant waits on one station
- Tool changes and tool checks stopping the machine between hole size groups
What Buyers Ask For
- A spindle speed range that covers small diameters without giving up hole quality
- Tool capacity large enough to run a mixed hole size programme without operator intervention
- Broken tool detection that reacts before a whole stack is scrapped
- A machine base that does not move with temperature or vibration
Typical Application Scenarios
Small diameter through holes
D2X D3X and D4X drill from φ0.15mm to φ6.35mm at 160-200krpm with drilling accuracy of ±1mil.
Mixed hole size programmes
220pcs tool capacity with automatic tool length and diameter check lets one programme run through many diameters.
High panel throughput
D3X and D4X reach 80m/min on the XY axes which is the practical route to shortening the drilling cycle.
Stack drilling
Pile height is one of the technics parameters listed as affecting hole location accuracy and is set against the material and the hole diameter.
Suitable Machines
D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves th...
View Specifications →D3X PCB Drilling Machine
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
View Specifications →
D4X PCB Drilling Machine
Linear motor drive with high precision linear scale and guide on a granite marble base frame. The D4X is the volume drilling configurat...
View Specifications →
D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC dr...
View Specifications →Solution Process
Confirm the hole map
Send the drill file the smallest diameter the panel format and the stack you plan to run.
Match the series
Ball screw drive on D1X and D2X or linear motor drive on D3X and D4X depending on the feed rate you need.
Set the tooling
Drill bit specification pressure foot and vacuum pressure are confirmed together with the machine.
Install and hand over
Installation training and the daily weekly and monthly maintenance schedule are handed over with the machine.
Delivery Capability
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
- Three service stations covering South China East China and North China
- Member of HKPCA exhibiting at the Shenzhen international circuit exhibition
Related Solutions and Guides
Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how ...
See The Process →Spare Parts and Maintenance
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance l...
See The Process →PCB Drilling Hole Location Accuracy and CPK
Good hole location accuracy makes the following processes easier and to some extent even makes up for weakness...
Read More →Ball Screw and Linear Motor Drives Compared
The drive train is the single biggest difference between the four DLCNC drilling series. This is what changes ...
Read More →Air Bearing and Ball Bearing Spindles Compared
Spindle choice on a PCB machine is not a preference. It follows from what the operation needs which is speed f...
Read More →Multilayer Rigid PCB Drilling FAQ
What drilling accuracy can I expect
How is hole location accuracy actually controlled
What is CPK and what value should I hold
Which series should a high layer count shop choose
Send Us the Process Not Just the Machine Name
Describe the operation you are trying to hold and the numbers you have to hit. We will come back with the machine and the specification that supports it.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.