General Nozzle
Orange Plastic Nozzle Body with Wire Clip
This listing appeared on the previous site under a single generic product title with no specification text. The description below reports only what is visible in the factory photographs of this item. Model reference, thread size, spray pattern and flow data are confirmed by email before quotation.
An orange plastic nozzle body with wire clip provides a secure, lightweight connection for low-pressure spray applications where metal parts are not required. This design is used in paper making, washing lines, and light-duty industrial systems where corrosion resistance and low weight are priorities over high pressure or abrasive service.
No published specification table exists for this listing. Send the duty and the thread on your header and we will confirm the size, pattern and material by email.
Key Benefits
What This Nozzle Gives You
- Orange plastic body reduces weight and cost compared to metal nozzles
- Wire clip provides a quick, tool-free connection and disconnection
- Suitable for low-pressure applications in paper making and washing lines
- Non-metallic body avoids galvanic corrosion in water or chemical service
- Easy to replace and maintain in high-volume or temporary setups
- Free trial samples available to test fit and function before ordering
Application Scenarios
Where It Is Installed
- Paper making lines where low-pressure water is applied to sheets without metal contact
- Washing systems in textile or light industrial workshops using non-abrasive liquids
- Temporary or mobile spray setups where quick assembly and disassembly are needed
- Low-pressure misting systems in greenhouses or livestock areas with non-corrosive fluids
- Maintenance access points where frequent nozzle changes are required
Who It Is For
Buyers Who Specify It
- Maintenance teams replacing nozzles in low-pressure washing or paper handling lines
- OEM machine builders specifying low-cost, lightweight nozzles for non-critical spray points
- Installers of temporary or modular spray systems needing tool-free connections
- Facility managers looking for corrosion-resistant parts in non-abrasive service
- Distributors stocking low-cost nozzle components for light industrial use
Problems It Solves
What It Fixes on the Line
- Heavy metal nozzles causing strain on lightweight pipe supports or fittings
- Corrosion in metal nozzles when used with water or mild chemicals
- Slow assembly and disassembly due to threaded or clamped connections
- High cost of stainless steel or brass nozzles for non-critical applications
- Lack of quick-release options in standard nozzle designs
Technical Features
How It Is Built
- Orange plastic body with integrated wire clip for fast connection
- No internal moving parts, reducing wear and maintenance
- Designed for low-pressure spray systems with non-abrasive fluids
- Wire clip allows tool-free installation and removal
- Non-metallic construction avoids galvanic corrosion
- Compatible with standard hose or pipe fittings where pressure is low
Materials
Body Materials and Where Each One Suits
- Orange plastic body for non-corrosive, low-pressure service
- Metal wire clip for durable, reusable connection
- Suitable for water, mild cleaning solutions, and non-abrasive liquids
Manufacturing Process
How the Part Is Made
- Material selection based on the intended duty and fluid type
- Molding of the orange plastic body to specified dimensions
- Assembly of the metal wire clip onto the body
- Inspection of clip fit and body integrity
- Packaging and transportation
Quality Control
What Is Checked Before It Ships
- Raw material is selected from approved plastic and metal suppliers
- Every product is inspected for correct body shape and clip fit before packaging
- Every product is tested before it ships
- A 3 month quality guarantee is stated on the product listings
Customization
What Can Be Changed to Suit You
- Standard and non-standard parts can be customised to drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial or test installations
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| Brass or stainless steel nozzle | Metal nozzles handle higher pressure and abrasion but add weight and cost; this plastic version is better for low-pressure, non-critical points |
|---|---|
| Threaded nozzle | Threaded connections require tools and are slower to install; the wire clip allows tool-free assembly |
| Full cone or hollow cone nozzle | These are designed for circular coverage; this nozzle is for linear or point application with a simple connection |
| Nozzle with O-ring seal | O-ring seals are used in high-pressure systems; this wire clip design is for low-pressure, non-sealed connections |
Use Guide
Fitting and Running It
- Confirm the fluid type and pressure before selecting this nozzle
- Ensure the wire clip is fully engaged on the fitting to prevent disconnection
- Use only with non-abrasive liquids to avoid wear on the plastic body
- Check the clip for deformation or fatigue after repeated use
- Replace the nozzle if the plastic body shows signs of cracking or warping
- Do not use in high-pressure or high-temperature applications
Questions Buyers Ask
Orange Plastic Nozzle Body with Wire Clip Questions
What is the purpose of the wire clip on this nozzle?
The wire clip provides a quick, tool-free connection and disconnection for the orange plastic nozzle body, ideal for low-pressure, temporary, or frequently changed spray points.
Can I use this nozzle in high-pressure systems?
No. This orange plastic nozzle body with wire clip is designed for low-pressure applications only. It is not suitable for high-pressure or abrasive service.
Which fluids can this nozzle handle?
This nozzle is suitable for water and mild cleaning solutions. Avoid use with abrasive, high-temperature, or solvent-based fluids that could degrade the plastic body.
Can I get a sample before ordering?
Yes. Trial samples can be sent free of charge, and samples can be ready within 10 days.
Do you accept OEM orders for this product?
Yes. Standard and non-standard parts can be customised to your drawing, and OEM orders are accepted including customer marking.
What is the quality guarantee for this nozzle?
A 3 month quality guarantee is stated on the product listings. If a nozzle fails in service, send us a photo and the service conditions by email for assessment.
What are your payment terms?
The product listings state T/T 100% in advance. Send the model, quantity, and destination port by email and we will confirm the terms for your order.
Go Deeper
Industries Guides and Ways to Order
Ask About Orange Plastic Nozzle Body with Wire Clip
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.