General Nozzle
Grey Plastic Clamp on Nozzle Fitting
This listing appeared on the previous site under a single generic product title with no specification text. The description below reports only what is visible in the factory photographs of this item. Model reference, thread size, spray pattern and flow data are confirmed by email before quotation.
A grey plastic clamp on nozzle fitting secures a spray nozzle to a hose or pipe without threading, which is what you need when replacing a worn fitting on a paper machine, washing line, or cooling system where quick installation and vibration resistance are required. This CNSS fitting uses a metal mounting bracket and a lever-operated clamp to hold the nozzle in place, and it is designed for use with standard hose sizes in low to moderate pressure applications.
No published specification table exists for this listing. Send the duty and the thread on your header and we will confirm the size, pattern and material by email.
Key Benefits
What This Nozzle Gives You
- No threading required, so it fits any standard hose or pipe without adapters
- Lever-operated clamp allows fast installation and removal during maintenance
- Metal mounting bracket resists vibration and prevents nozzle movement under pressure
- Grey plastic body resists corrosion and wear in wet or chemical environments
- Blue cap protects the valve when not in use and prevents debris entry
- Designed for use with standard industrial hoses and common nozzle sizes
Application Scenarios
Where It Is Installed
- Replacing a damaged threaded fitting on a paper machine wash bar where vibration causes loosening
- Installing a nozzle on a cooling line in a textile workshop where frequent access is needed
- Securing a nozzle on a greenhouse fog system where quick setup and disassembly are required
- Mounting a nozzle on a parts washing line where vibration or shock could loosen a threaded joint
- Using a temporary nozzle setup on a maintenance or trial washing line without permanent fittings
Who It Is For
Buyers Who Specify It
- Maintenance teams replacing worn or damaged fittings on industrial spray systems
- OEM machine builders integrating quick-release nozzles into washing or cooling modules
- Installers setting up temporary or portable misting or washing systems
- Paper mill operators dealing with vibration-induced fitting failures
- Facility managers needing a low-cost, fast-install solution for minor spray line repairs
Problems It Solves
What It Fixes on the Line
- Loose or vibrating threaded fittings that fail under repeated pressure cycles
- Time lost during maintenance due to the need to disassemble and rethread connections
- Damage to hoses or nozzles from over-tightening or thread misalignment
- Inability to install a nozzle on a non-threaded hose or pipe in a retrofit situation
- Frequent replacement of fittings due to thread wear in high-vibration environments
Technical Features
How It Is Built
- Lever-operated clamp with hex nut and wing screw for easy adjustment
- Metal mounting bracket provides structural support and resists vibration
- Grey plastic body resists moisture and common industrial chemicals
- Blue cap seals the valve when not in use to prevent contamination
- Designed for use with standard hose sizes and common nozzle fittings
- No internal parts to wear or leak, so it maintains a consistent seal
Materials
Body Materials and Where Each One Suits
- Grey plastic body for resistance to moisture and common industrial chemicals
- Metal mounting bracket for strength and vibration resistance
- Blue cap made of durable plastic to protect the valve
Manufacturing Process
How the Part Is Made
- Material selection based on the duty environment and hose type
- Machining of the clamp body and bracket
- Assembly of the lever, nut, screw and cap
- Inspection of clamp function and fit
- Packaging
- Transportation
Quality Control
What Is Checked Before It Ships
- Raw material is selected from brass, 303 stainless steel, 304 stainless steel and 316 stainless steel
- Every process from material selection to transportation is controlled
- Every product is tested before it leaves the factory
- A 3 month quality guarantee is given on the product
Customization
What Can Be Changed to Suit You
- Standard and non-standard parts can be customised to drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial installations
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| Threaded nozzle fitting | A threaded fitting requires matching threads and can loosen under vibration, while this clamp on version installs without threading and resists movement |
|---|---|
| Screw clamp with plastic body | This version uses a metal bracket for added strength, while a purely plastic screw clamp may fail under repeated pressure or vibration |
| Quick connect coupling | A quick connect is designed for high frequency connection, while this clamp on fitting is better for permanent or semi-permanent nozzle mounting |
| Adaptor fitting | An adaptor requires two components and a thread match, while this clamp on fitting is a single unit that fits any standard hose |
Use Guide
Fitting and Running It
- Confirm the hose diameter and nozzle size before selecting the fitting
- Ensure the hose is clean and free of debris before clamping
- Use the lever to tighten the clamp evenly around the hose
- Check the fit periodically during operation to ensure no loosening occurs
- Replace the blue cap when the nozzle is not in use to prevent contamination
- Do not exceed the pressure rating of the plastic body in high pressure applications
Questions Buyers Ask
Grey Plastic Clamp on Nozzle Fitting Questions
What hose sizes can this fitting work with?
The grey plastic clamp on nozzle fitting is designed for standard industrial hose sizes. Confirm the hose diameter and nozzle size with your drawing or duty sheet before ordering.
Can I get a sample before placing a production order?
Yes. Trial samples can be sent free of charge and samples can be ready within 10 days.
Do you accept OEM orders and custom marking?
Yes. Standard and non-standard parts can be customised to your drawing, and OEM orders with customer marking are accepted.
What is the quality guarantee for this fitting?
A 3 month quality guarantee is given on the product. Send us the fitting photo and the service conditions by email if it fails in service.
What materials are used in this fitting?
The body is grey plastic, the mounting bracket is metal, and the cap is blue plastic. The materials are selected for resistance to moisture and common industrial chemicals.
What are your payment terms?
The product listings state T/T 100% in advance. Send the model, quantity and destination port by email and we will confirm the terms for your order.
Can I install this fitting on any hose?
Yes, it is designed for standard industrial hoses. Confirm the hose diameter and nozzle size with your drawing or duty sheet before ordering.
Go Deeper
Industries Guides and Ways to Order
Ask About Grey Plastic Clamp on Nozzle Fitting
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.