Carbon Fiber Steering Wheel Parts
Carbon fiber steering wheel rims and trim parts at a nominal 380 mm diameter, adjusted to the specific vehicle model, available from a single piece.
What This Part Is and Why It Exists
Carbon fiber material is widely used in auto parts and the refitted vehicle trade to manufacture external and interior decoration parts with a distinctive material texture. For a steering wheel that texture sits directly in the driver's hands, which is why the surface quality and the edge finishing matter more here than on almost any other trim part.
The nominal size is 380 mm diameter, adjusted according to the specific model of the customer. Black, red and LED variants are produced, and the minimum order quantity is a single piece, so one-off builds are as welcome as a production batch.
Four Reasons Buyers Specify This Part
One Piece Minimum
A minimum order quantity of one piece suits show cars, one-off builds and sample evaluation.
Sized to the Model
The 380 mm nominal diameter is adjusted according to the specific model of the customer rather than sold as a universal fit.
Light and Strong in the Hand
The part is light weight and high strength at once, which is what a driver notices first.
Colour Options
Black and red are produced, with LED variants available.
Where This Part Is Used
- Steering wheel rims and rim sections for refit programmes
- Interior trim panels and inserts in matching weave
- Show and demonstration vehicles
- Sample builds for accessory brands entering a model
Buyers This Part Was Made For
- Refit and tuning workshops
- Automotive accessory brands
- Individual builders and collectors
Three Failure Modes This Part Removes
Universal parts that fit nothing
A steering wheel sold as one-size rarely matches the airbag and column of a specific model.
High minimums for a single build
A one-off project cannot absorb a hundred-piece minimum.
Surfaces that wear in the hand
Poorly finished composite trim in a contact area shows wear quickly.
Technical Data for Carbon Fiber Steering Wheel Parts
Every value below is taken from the published CarbonWizer specification for this part. Anything not published is marked TBC rather than estimated.
| Material | Carbon fiber |
| Size | 380 mm diameter, according to the specific model of the customer |
| Available Colours | Black, red, LED |
| Minimum Order Quantity | 1 piece |
| Part Types | Steering wheel rims, rim sections and interior trim parts |
| Surface Finish | Gloss or matte on request |
| Delivery Time | Based on the shipping method selected |
| Certification | TBC - confirm in writing before order |
Technical Features
- Carbon fiber construction
- Nominal size 380 mm diameter, adjusted to the customer's model
- Available in black and red, with LED variants
- Minimum order quantity of 1 piece
- Gloss or matte finish on request
Materials
Carbon fiber composite, moulded and finished. Where a part combines a composite shell with a metal or plastic carrier, both are produced in the same project.
How This Part Is Made
Model and fitment review
Drawing, load case and finish reviewed against the geometry.
Mould making
Material, fibre architecture and process selected for the part.
Lay-up
The part is formed by the chosen composite or machining route.
Cure
Cure or finish machining brings the part to final geometry.
Finishing and polishing
Surface and edges finished to the agreed appearance.
Fit check
Dimensions checked against the drawing before despatch.
Quality Control
Visible surfaces are inspected for weave alignment and finish quality. Fitment is checked against the customer's model data or an original part.
Certifications: No third-party certification records were published on the previous CarbonWizer site. Certification status for this part is marked TBC and is confirmed in writing before an order is placed.
What Can Be Changed
- Diameter and profile adjusted to the vehicle model
- Black, red or LED variants
- Gloss or matte surface
- Matching interior trim parts in the same weave
How It Compares
| Carbon fiber rim | Light, strong and distinctive in the hand; made to the model |
| Leather wrapped rim | Familiar and comfortable, but without the material texture or weight saving |
| Painted plastic trim | Cheapest to produce, but reads as plastic next to a composite surface |
How to Specify and Order This Part
Give the vehicle model and year so the 380 mm nominal diameter can be adjusted to suit. If the wheel carries an airbag or control switches, send photographs of the reverse side. Choose matte for a grip area that sees daily use.
Parts Often Specified Alongside This One
Carbon Fiber Rearview Mirror Case
Replacement mirror caps in real carbon fiber, moulded to the original mounting geometry so they clip back onto the car, from a minimum order of ten pieces.
View details
Aluminum Alloy Engine Housing
A CNC machined aluminium alloy engine housing prototype at 320 x 195 x 180 mm, cut from solid so the casting design can be tested before a tool is ordered.
View details
Carbon Fiber Gift Items
Wallets, money clips, card holders, pens and other consumer items in 3K carbon fiber, with specialised coating material where touch feel matters.
View detailsRelated Cases and Technical Guides
Carbon Fiber Car Parts Programme
Carbon fiber car parts is one of the success case areas developed by the CarbonWizer team, covering mirror caps, steering wheel parts, hoods, spoilers and grille sections.
Read the case
Plain Weave Twill and Forged Carbon Explained
Weave pattern and surface finish are the two decisions buyers argue about most, and they affect appearance far more than structure. Here is what each one actually is.
Read the guide
What to Send When You Order Custom Carbon Fiber Parts
Most quoting delays come from missing information, not from difficult parts. Here is the set of details that lets a composite supplier quote in one pass.
Read the guideQuestions About Carbon Fiber Steering Wheel Parts
What is the minimum order quantity?
One piece. Single builds and sample evaluations are accepted.
What size are the wheels?
The nominal size is 380 mm diameter, adjusted according to the specific model of the customer.
Which colours can you produce?
Black and red are produced, and LED variants are available.
How long will delivery take?
Delivery time is based on the shipping method selected. Sample orders normally ship within one week and normal orders take 15 to 25 days to produce.
Quote Carbon Fiber Steering Wheel Parts for Your Project
Email the drawing or the part number with the quantity and finish you need. Samples are normally despatched within one week.