Carbon Fiber Sheets
High pressure moulded plates in 3K twill with a matte finish, cut to size or machined to print.
Every Sheets Product in This Category
1 product in this category, each with a full specification table, manufacturing route and application notes.
Why Buyers Come to This Range
Plate bought by thickness alone often arrives with the wrong lay-up. A plate skinned in twill fabric over a balanced unidirectional core behaves very differently from one woven through.
Who It Suits
- Designers specifying a stiff flat panel or bracket blank
- Machine shops that cut their own profiles
- Drone and robotics builders needing repeatable plate stock
Where Sheets Parts Are Used
UAV and Drone
Carbon fiber parts reduce airframe weight by about 40 per cent against traditional materials, which largely increases the duration of flight while high strength keeps the platform stiff and stable.
Moving mass and cycle timeRobotics and Automation
A variety of high strength structural parts are made from carbon fiber composite combined with traditional metal materials. In automation the argument is cycle time: less moving mass means faster acceleration and less residual vibration.
What CarbonWizer Brings to This Category
Nine Moulding Routes
Compression moulding, autoclave, roll wrapping, vacuum infusion and five more, chosen by the part rather than by habit.
In-House Tooling
Mould design and making sit in the same one-stop service as design, model making and spray finishing.
Verified Before Tooling
Structural samples in the real material prove strength and precision before a mould is cut.
Sample in One Week
Sample orders normally ship within one week; normal production orders take 15 to 25 days.
Projects Built From This Range
Industrial and Electronics Parts
Industrial and electronics parts is one of the success case areas developed by the CarbonWizer team, covering wallets and key cases, signal transceivers, watch dials, motorcycle tail boxes, phone cases, headset caps, laptop cases and equipment containers.
Read the case
Carbon Fiber Drone Parts Programme
Carbon fiber drone parts is one of the success case areas developed by the CarbonWizer team, spanning six-rotor and four-rotor airframes, aerial and police drone platforms.
Read the caseQuestions About Carbon Fiber Sheets
What is the plate actually made of?
Every stock plate uses 2 x 2 twill carbon fiber prepreg as the outer material over a 0/90 balanced unidirectional carbon fiber prepreg core, with a matte finish on both faces.
Which thicknesses are held in stock?
Ten thicknesses from 0.5 mm to 5.0 mm in 0.5 mm steps, all in 500 x 400 mm sheets.
How quickly can you deliver carbon fiber sheets?
Sample orders are usually shipped out within one week and normal orders take 15 to 25 days. Delivery after despatch depends on the shipping method chosen.
Get a Quote for Carbon Fiber Sheets
Email the drawing, the quantity and the finish you need. If the part is not in the catalogue it is quoted against your geometry.