XSZ6745-B7 6.7X-45X Stereo Zoom Microscope

Key Benefits

• 105mm working distance provides clearance for a soldering iron, hot air pencil or probe during rework
• 1:6.7 zoom ratio covers a 23.8mm field down to 4.9mm without swapping objectives
• 45° inclined binocular head reduces neck strain during extended inspection sessions
• 360° rotatable head can be locked in any position for consistent operator setup
• Diopter adjustment of ±5 diopters allows individual eye focus calibration without changing eyepieces

Application Scenarios

• SMD rework at the bench with a 45° head for ergonomic viewing and hands working under the optics
• Incoming inspection of small mechanical parts, connectors or moulded components against a drawing
• Wire bond and solder joint documentation for a customer quality report using the same instrument
• Teaching a rework technique to a group from one screen instead of one eyepiece
• Watch, jewellery and micro-mechanical assembly where hands work under the optics

Who It Is For

• Electronics repair and rework benches handling SMD and BGA work
• Quality departments that must attach photographs to inspection records
• Training rooms in electronics assembly plants
• Precision assembly workshops in watchmaking, jewellery and micro-mechanics

Problems It Solves

• A stereo head with no camera forces the operator to describe defects instead of showing them
• Short working distance instruments leave no room for a soldering iron under the optics
• Fixed magnification stands make an operator swap objectives between locating a fault and inspecting it
• Separate camera and microscope purchases often fail to match the tube diameter and eyepiece field
• Lack of adjustable head angle causes neck fatigue during long inspection sessions

Technical Features

• Greenough optical system with a genuine stereo view at both ends of the zoom range
• 45° inclined binocular or trinocular head with 360° rotation and locking mechanism
• Interpupillary adjustment 54~75mm for operator-to-operator handover
• Diopter adjustment ±5 diopters for individual eye focus calibration
• 1:6.7 zoom ratio provides continuous magnification from 6.7X to 45X
• Standard objective 1X with 105mm working distance
• Field of view 23.8mm at 6.7X, 4.9mm at 45X
• Eyepieces with high-eyepoint design for observers wearing glasses
• Optional auxiliary objectives and eyepieces extend the usable range

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head on the same XSZ6745 body
• Auxiliary objectives from 0.3X to 2X to move the working distance between 30mm and 165mm
• Eyepieces from WF10X through WF30X to extend the magnification to 3.4X-270X
• Optional 45° inclined head with 360° rotation and locking mechanism
• Alternative stands from the stereo microscope stand range

Comparison With Other Options

Use Guide

• Set the interpupillary distance between 54mm and 75mm before focusing, or the two channels will not merge
• Adjust the diopter on one eyepiece to match your dominant eye, then focus with the other
• Focus at the highest magnification first, then zoom out, so the image stays in focus across the range
• Keep the 105mm standard working distance in mind when choosing a soldering iron and holder for the bench
• Use the 360° rotatable head to align the optics with your preferred viewing angle and lock it in place