XSZ6745-B5 6.7X-45X Stereo Zoom Microscope

Key Benefits

• 105mm working distance provides clearance for soldering irons, hot air pencils and probes during rework
• 1:6.7 zoom ratio covers a 23.8mm field down to 4.9mm without swapping objectives
• Binocular or trinocular head allows simultaneous observation and camera capture
• Interpupillary adjustment 54~75mm and ±5 diopter correction support multiple users and glasses wearers
• Optional eyepieces and auxiliary objectives extend magnification to 3.4X-270X and working distance to 30~165mm

Application Scenarios

• SMD and BGA rework at the bench with a clear view of solder joints while using a soldering iron
• Incoming inspection of small mechanical parts, connectors and moulded components against a drawing
• Documentation of wire bonds, solder joints and micro-assembly steps for quality reports
• Teaching precision techniques in electronics or watchmaking using a shared screen
• Geological sample examination and mineral identification under stereo depth perception

Who It Is For

• Electronics repair and rework benches handling SMD and BGA work
• Quality departments requiring visual records of inspection results
• Teaching labs in electronics, engineering and precision assembly
• Geology, mineralogy and gemmology labs for sample examination
• Watchmaking and jewellery workshops performing micro-assembly

Problems It Solves

• A fixed magnification stand forces an operator to swap objectives between locating a fault and inspecting it
• Short working distance instruments block the use of tools like soldering irons under the optics
• Separate camera and microscope purchases often fail to match tube diameter and eyepiece field
• Lack of interpupillary adjustment or diopter correction makes shared use difficult
• No stereo depth perception in flat-screen digital microscopes limits hand-eye coordination

Technical Features

• Greenough optical system provides true stereo depth perception across the zoom range
• 45° inclined binocular or trinocular head with 360° rotation and lockable positioning
• Interpupillary adjustment 54~75mm and ±5 diopter correction for user-specific fit
• 1:6.7 zoom ratio allows continuous magnification from 6.7X to 45X without objective change
• 1X objective with 105mm working distance supports tool clearance during bench work
• Field of view changes from 23.8mm at 6.7X to 4.9mm at 45X, maintaining focus across the range
• Optional eyepieces and auxiliary objectives extend the usable magnification and working distance

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head on the same XSZ6745 body
• Auxiliary objectives from 0.3X to 2X to adjust working distance between 30mm and 165mm
• Eyepieces from WF10X to WF30X to extend magnification to 3.4X-270X
• Alternative stands from the stereo microscope stand range
• Configuration-to-order assembly of head, stand, illumination and camera combinations

Comparison With Other Options

Use Guide

• Adjust the interpupillary distance between 54mm and 75mm before focusing to ensure a merged image
• Set the diopter correction on the right eyepiece to ±5 before use; this compensates for vision differences
• Focus at the highest magnification first, then zoom out to maintain focus across the zoom range
• Keep the 105mm standard working distance in mind when positioning tools and holders on the bench
• Use the 360° rotatable head to align the optics with the work surface or camera angle