XSZ6745-B2 6.7X-45X Stereo Zoom Microscope

Key Benefits

• 105mm working distance provides clearance for soldering irons, probes and tools under the head
• 1:6.7 zoom ratio covers a 23.8mm field down to 4.9mm without swapping objectives
• Binocular or trinocular head allows simultaneous observation and camera capture
• Diopter adjustment of ±5 diopters accommodates users with differing vision
• Interpupillary adjustment 54~75mm enables quick handover between operators
• Optional eyepieces and objectives extend magnification to 3.4X-270X and working distance to 30~165mm

Application Scenarios

• SMD and BGA rework at the bench with a clear view of solder joints and component placement
• Incoming inspection of small mechanical parts, connectors and moulded components
• Teaching micro-assembly techniques in a lab or training room using a shared screen
• Jewellery and watchmaking assembly where hands work under the optics with stereo depth
• Quality inspection of micro-features on PCBs, contacts and small electronic components

Who It Is For

• Electronics repair and rework benches handling SMD and BGA work
• Quality departments requiring visual confirmation of small defects
• Teaching labs in electronics, engineering and precision manufacturing
• Jewellery, watchmaking and micro-mechanical assembly workshops
• Research labs doing fine mechanical or micro-assembly tasks

Problems It Solves

• Fixed magnification stands require objective changes to inspect different features
• Short working distance instruments block tools like soldering irons or probes
• Lack of stereo depth perception in digital-only microscopes makes hand work difficult
• Separate camera and microscope setups often mismatch tube diameter or eyepiece field
• No interpupillary adjustment forces users to strain or share a single eyepiece

Technical Features

• Greenough optical system provides true stereo depth perception across the zoom range
• 45° inclined binocular or trinocular head with 360° rotation and locking mechanism
• Interpupillary adjustment 54~75mm for operator-to-operator handover
• Diopter adjustment ±5 diopters for individual vision correction
• 1:6.7 zoom ratio enables continuous magnification from 6.7X to 45X
• 1X objective with 105mm working distance supports hands-on manipulation
• Field of view changes from 23.8mm to 4.9mm across the zoom range
• Optional eyepieces and objectives allow magnification extension to 3.4X-270X
• Optional working distance ranges from 30mm to 165mm with auxiliary objectives

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head configuration on the same XSZ6745 body
• Optional eyepieces from WF15X to WF30X to extend magnification to 3.4X-270X
• Auxiliary objectives from 0.3X to 2X to adjust working distance between 30mm and 165mm
• Replacement of the standard WF10X/22mm eyepiece with higher magnification models
• Integration with external camera systems via C-mount or other adapters

Comparison With Other Options

Use Guide

• Adjust the interpupillary distance between 54mm and 75mm before focusing to ensure a single merged image
• Set the diopter on one eyepiece to ±5 before focusing, then fine-tune the other side
• Use the 105mm standard working distance as a baseline when positioning tools and holders
• Start focusing at the highest magnification, then zoom out to maintain focus across the range
• Select auxiliary objectives and eyepieces based on the required working distance and magnification