MD208 8.5" LCD Display Digital Microscope for Soldering Repairing

Key Benefits

• 8.5-inch LCD screen with 1280x800 resolution shows full-size images without a monitor
• Built-in fill lights and LEDs provide even illumination for solder joints and small parts
• 2-megapixel HD sensor captures 12M photos at 4032x3024 and FHD video at 1920x1080
• No PC required: stores images and video directly to micro-SD card up to 32GB
• 5X to 260X magnification range covers SMD, BGA, connector and micro-assembly inspection
• Metal stand with adjustable height and built-in light dimmer supports stable bench use
• 12 language options including English, Chinese, Japanese, French, German, Korean, Spanish, Portuguese, Russian, Thai, Vietnamese
• USB 5V DC power supply runs the unit from a standard port or power bank

Application Scenarios

• Soldering and rework of SMD components on PCBs with real-time visual feedback on the 8.5-inch screen
• Inspection of BGA balls and fine-pitch connectors under 200X magnification
• Documentation of solder joint quality with 12M photos stored directly to micro-SD card
• Phone and watch repair where a clear, large screen helps identify tiny damage or misalignment
• Teaching soldering techniques in a lab or training room using a single shared display
• Field inspection of small parts without needing a computer or external monitor

Who It Is For

• Electronics repair and rework technicians handling SMD, BGA and fine-pitch components
• Watchmakers and jewellery artisans inspecting micro-assembly and solder joints
• Training labs and vocational schools teaching soldering and electronics assembly
• Field service engineers doing on-site PCB inspection without a laptop
• Small-scale manufacturers doing in-line inspection of small parts and connectors

Problems It Solves

• A standard microscope requires a separate monitor or laptop to view the image, increasing setup time and cost
• Low-resolution screens on handheld digital microscopes make it hard to see fine details
• No on-device storage forces the user to transfer data immediately or lose it
• Fixed lighting or no built-in lights causes shadows and uneven exposure on small parts
• Lack of magnification range below 5X makes it hard to locate a component before inspection
• No language options in English or local languages limits usability in international teams

Technical Features

• 2-megapixel HD sensor with progressive scan for clear image capture
• FHD 1920x1080 video at 30 frames per second, 1080P 1440x1080 at 30fps, 720P 1280x720 at 30fps
• Video format: AVI, photo format: JPG, maximum photo resolution: 4032x3024
• Magnification range: 5X to 260X, focus range: 1cm to 16cm
• Frame rate: up to 30 frames per second at full resolution
• Built-in fill lights and LEDs for consistent illumination
• 8.5-inch LCD screen with 1280x800 resolution for direct viewing
• Micro-SD card slot supports up to 32GB storage (card not included)
• USB 5V DC power input with power cable including light dimmer
• Metal stand with adjustable height and two metal clips for secure part holding
• 12 language support: Simplified Chinese, Traditional Chinese, English, Japanese, French, German, Korean, Portuguese, Spanish, Russian, Thai, Vietnamese

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• No camera or sensor upgrade available; the 2-megapixel sensor is fixed
• No change to the 8.5-inch LCD screen size or resolution
• No change to the metal stand or light source configuration
• No additional language options beyond the 12 listed
• No replacement of the USB 5V DC power input with alternative connectors

Comparison With Other Options

Use Guide

• Connect the USB 5V DC power cable to a power source before turning on the unit
• Adjust the metal stand height and position the fill lights to avoid shadows on the part
• Place the component within the 1cm to 16cm focus range for sharp image capture
• Use the light dimmer to reduce glare on reflective surfaces like solder or metal
• Insert a micro-SD card (up to 32GB) to store photos and videos directly on the device
• Switch between video and photo modes using the on-screen menu; press the shutter button to capture
• Select the desired language from the settings menu before use