HDMI USB Industrial Microscope Camera Panasonic 1/3" AM3609

Key Benefits

• Real-time HDMI output with minimal latency for direct monitor viewing during inspection
• USB capture at Full HD 1920*1080@30FPS for computer-based analysis and documentation
• 1/3" sensor with 2.75um pixel size ensures high-resolution imaging and low noise
• Dual interface support allows simultaneous use of HDMI and USB for flexible setup
• Accurate color reproduction and HDR wide dynamic range improve defect visibility
• Adjustable image settings via mouse control include brightness, contrast, white balance, and noise reduction
• Crosshair, reticle, and grid line functions support measurement, alignment, and defect marking
• Compact design with 83.60*74.00*50.00 mm dimensions and 0.3kg weight fits standard microscope setups

Application Scenarios

• PCB inspection on a production line with real-time HDMI display for operator review
• Surface defect detection in electronics manufacturing using USB capture for image logging
• Quality control checks with live image adjustment via mouse for brightness and contrast
• Laboratory imaging where accurate color reproduction and low noise are required
• Documentation of micro-features using reticle and grid lines for measurement reference
• Multi-operator workflows where one person views the HDMI feed while another captures data via USB

Who It Is For

• Electronics manufacturers performing PCB and SMD inspection
• Quality control teams requiring real-time visual feedback and image capture
• Industrial inspection benches needing dual output for monitoring and documentation
• Research and teaching labs requiring accurate color and resolution for observation
• Manufacturing lines with surface defect detection protocols

Problems It Solves

• A single-output camera limits the ability to view live inspection on a monitor while capturing data on a computer
• Low-resolution or noisy sensors make fine defect detection difficult in high-precision work
• Lack of adjustable image settings forces operators to use external software for basic corrections
• No built-in measurement aids like crosshairs or grid lines requires separate tools for alignment
• Incompatible interfaces prevent direct connection to both monitor and computer without adapters

Technical Features

• 1/3" high-quality imaging sensor with 2.75um x 2.75um pixel size
• Full HD resolution 1920*1080 at 30 frames per second
• Real-time HDMI output with minimal latency for live display
• USB capture interface for computer-based imaging and analysis
• Support for SD card output for standalone image storage
• Adjustable image parameters: brightness, contrast, saturation, white balance, black-and-white switch, HDR
• Digital amplification, mirroring, noise reduction, and screen freeze functions
• Crosshair with adjustable color, line size, visibility, and position
• 4 sets of reticle with adjustable color, size, shift, and visibility
• 8 sets of grid lines, each assignable to a specific product or inspection task
• UI interface controlled via mouse for easy on-the-fly adjustments
• DC-12V/1A power input with included power adapter
• Compact housing: 83.60*74.00*50.00 mm, weighs 0.3kg

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Available with or without SD card output depending on configuration
• Can be paired with different microscope heads or stands via standard C-mount or adapter
• Image settings can be pre-configured for specific inspection tasks
• Reticle and grid line patterns can be assigned to different product types
• Firmware settings can be adjusted for specific lighting or contrast conditions

Comparison With Other Options

Use Guide

• Connect the camera to a DC-12V/1A power supply using the included adapter
• Use HDMI to connect directly to a monitor for real-time inspection viewing
• Use USB to connect to a computer for image capture, analysis, and documentation
• Use the mouse interface to adjust brightness, contrast, white balance, and noise reduction during live operation
• Enable reticle or grid lines in the UI to mark measurement points or align features
• Set the desired frame rate and resolution in the camera settings before starting inspection
• Use SD card output for standalone image storage if no computer is available