10X Eyepiece for ST80 Stereo Microscope
The 10X eyepiece is designed for use with the ST80 stereo microscope series.
Product Overview
The 10X eyepiece is designed for use with the ST80 stereo microscope series. It provides a 10X magnification factor when used with the standard 1X objective, contributing to a total magnification of 10X at the lowest zoom setting. The eyepiece features a wide field of view with a field number of 20mm, allowing for a broader visual area during inspection tasks. It is compatible with both binocular and trinocular heads on the ST80 series.
- Magnification10X
- CompatibilityST80 Stereo Microscope Series
- Head TypeBinocular / Trinocular
- Optical DesignWide Field
Key Benefits
- Provides 10X magnification when used with the 1X objective on the ST80 series
- Wide field of view (F.N. 20mm) improves visual coverage during inspection
- Compatible with both binocular and trinocular heads on the ST80 series
- Simple replacement for worn or damaged eyepieces without changing the optical system
- Maintains consistent optical alignment when used with other ST80 series components
Application Scenarios
- Replacing a damaged or lost eyepiece on an ST80 stereo microscope in a repair bench
- Upgrading to a higher field of view for faster component location during SMD inspection
- Standardizing eyepiece use across multiple ST80 microscopes in a quality control lab
- Supporting training sessions where multiple users need to view the same sample simultaneously
- Maintaining consistent magnification across a production line of ST80 microscopes
Who It Is For
- Electronics repair and rework technicians using ST80 stereo microscopes
- Quality control staff in manufacturing environments requiring consistent inspection tools
- Teaching labs using ST80 microscopes for hands-on instruction
- Maintenance teams replacing worn optical components in field instruments
- Laboratories standardizing eyepiece specifications across multiple ST80 units
Problems It Solves
- A missing or damaged eyepiece halts inspection work until a replacement is sourced
- Mismatched eyepieces across microscopes lead to inconsistent magnification and field of view
- Low field of view limits the ability to locate small components quickly during rework
- Incompatible eyepieces prevent quick swaps between binocular and trinocular configurations
- Lack of spare eyepieces forces downtime during scheduled maintenance or training
Technical Features
- 10X magnification factor when used with a 1X objective
- Field number (F.N.) of 20mm for wide visual field
- Designed for use with ST80 stereo microscope series
- Compatible with both binocular and trinocular heads
- Optical design ensures consistent image quality across the field of view
Specifications
| Magnification | 10X |
|---|---|
| Compatibility | ST80 Stereo Microscope Series |
| Head Type | Binocular / Trinocular |
| Optical Design | Wide Field |
Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.
Customization Options
- Available as a standalone replacement part for ST80 series microscopes
- No configuration options; supplied as a standard 10X eyepiece
- No surface treatments or coatings specified; standard optical glass used
Comparison With Other Options
| 5X Eyepiece for ST80 Stereo Microscope | The 10X eyepiece provides higher magnification for detailed inspection, while the 5X offers a wider field of view at lower magnification for locating components. |
|---|---|
| 15X Eyepiece for ST80 Stereo Microscope | The 10X eyepiece offers a wider field of view and lower magnification, better suited for general inspection and hand-guided work; the 15X is for higher detail but narrower field. |
| ST80 Stereo Microscope with Built-in Camera | The 10X eyepiece is used for visual observation only; the camera system provides digital capture but does not replace the need for a proper eyepiece for direct viewing. |
Use Guide
- Ensure the eyepiece is fully seated in the head tube to avoid image distortion
- Use only with ST80 series microscopes to maintain optical alignment
- Clean the lens surfaces with a soft cloth before installation to avoid dust or smudges
- Do not force the eyepiece into the head; it should slide in smoothly
- Check that the interpupillary distance is adjusted correctly after installing the eyepiece
More From Stereo Microscope Eyepiece
15X Eyepiece for ST30 ST40 Stereo Microscope
View Details
30X Eyepiece for XSZ6745 Stereo Microscope
View Details
20X Eyepiece for ST30 ST40 Stereo Microscope
View Details
25X Eyepiece for XSZ7045 Stereo Microscope
View Details
20X Eyepiece for XSZ7045 Stereo Microscope
View Details
15X Eyepiece for XSZ7045 Stereo Microscope
View Details
10X Eyepiece for XSZ7045 Stereo Microscope
View Details
25X Eyepiece for XSZ6745 Stereo Microscope
View DetailsGuides and Applications
Frequently Asked Questions
Is this eyepiece compatible with all ST80 series microscopes?
Yes, it is designed for use with all models in the ST80 stereo microscope series.
Can I use this eyepiece with a trinocular head?
Yes, it is compatible with both binocular and trinocular heads on the ST80 series.
What is the field of view with this eyepiece?
The field of view is 20mm (F.N.), which provides a wide visual area for inspection tasks.
Does this eyepiece have a diopter adjustment?
The source text does not specify a diopter adjustment. It is a fixed-focus eyepiece.
Can I use this with a different microscope series?
No. It is specifically designed for the ST80 stereo microscope series and may not fit other models.
What is the magnification when used with the 1X objective?
The total magnification is 10X (10X eyepiece x 1X objective).
Request A Price On The 10X Eyepiece for ST80 Stereo Microscope
Send quantity, destination and the application. We will confirm the configuration, the price and the lead time.