37 products
Ceiling Lights
Flush and semi-flush ceiling fixtures in iron, acrylic, crystal, resin and stainless steel, including high-output LED models for rooms without the hei
Lighting And Circuitry Design
The service field printed on hundreds of our own product specifications, which means we design the light as well as sell the fixture.
Lighting Solutions Service: Lighting and circuitry design appears in the Quick Details table of more than seven hundred products in this catalogue. It means the factory will work on how a space is lit and how the fixture is wired, not only on what the fixture looks like on a shelf.
The problem
Why Buyers Come To Us For This
A room lit with one beautiful fixture and no plan is usually worse than a room lit with plain fittings and a good plan. The decisions that actually matter are how many light points there are, how high they hang, what colour temperature they run at, and how they are switched. Those decisions are cheap on a drawing and expensive after the ceiling is closed.
The process
How It Works Step By Step
Send the space
A floor plan, ceiling heights, and photographs. Say what each area is for.
We propose the layout
Fixture positions, quantities, mounting heights and the fixtures from our range that suit them.
Colour temperature and control
Most of the range offers 3000K, 4000K and 6500K on one item number, with switch control as the standard mode. Decide this at the drawing stage, because it is fixed at the order stage.
Circuitry
How the fixtures are grouped and switched, worked against the input voltage of the destination market.
Sample, then build
Prove the key fixture with a sample, then release the production order.
In practice
Ranges This Most Often Involves
What we need from you
Send These And The Answer Comes Back Complete
- A floor plan with ceiling heights, even a hand drawn one
- What each area is used for, and at what time of day
- The supply voltage and frequency at the destination
- Any existing fixtures the scheme has to live alongside
- Whether dimming is required, since it constrains the lamp choice
Product groups
Where To Start Browsing
2 products
Track Lights
Aluminium LED track fittings including magnetic foldable COB grille and linear strip models, on 85 to 265V.
5 products
Spotlights
Aluminium COB and grille spotlights on 85 to 265V, surface mounted, recessed and foldable, including dimmable models.
22 products
Modern Linear Wall Lights
Copper, iron, aluminium, acrylic and PC linear sconces, mostly tri-colour LED, for architectural lines of light rather than decorative points.
400 products
Pendant Lights
The core of this factory: iron, acrylic, aluminium and glass pendants in modern simple, Nordic and classic styles, built on relampable E27, E14 and G9
FAQ
Lighting And Circuitry Design Questions
Is the design service charged?
Ask at the enquiry stage. It is listed as a service on our product specifications; the commercial terms depend on the size of the project.
Will you produce a full lighting calculation?
Tell us what you need and we will tell you what we can produce. We would rather scope it honestly than promise a photometric report we have not committed to.
Can you work with our electrical contractor?
Yes. Our engineers have fluent English, which is the practical reason that works.
What control modes do your fixtures use?
Switch control is the standard mode published across this catalogue. Some models offer three colour temperature switching. Dimming is model specific, so ask before you specify it.
Start With Lighting And Circuitry Design
Send the list above and we will come back with a complete answer rather than a request for more information.