A spring hose clamp with a single solid hole in one ear, a simpler variant of our double hole clamp for positions where access is available from one side only. The single hole still gives the fitter a positive engagement point.
Suits positions where one ear is against a wall or a component and only one side can be reached.
The solid hole gives clamp pliers something to grip rather than sliding off a plain ear.
Maintains its grip through thermal cycling without re-tightening.
Orient the hole toward the access side during assembly. A clamp fitted with the hole facing away is nearly impossible to remove later without damaging the hose.
Double hole clamps unusable where only one ear can be reached
Plain ear clamps slipping out of pliers during fitting
Dimensional and load figures are set per order against your drawing or sample, so they are marked TBC rather than filled with catalogue numbers.
| Product Type | Flat Springs |
|---|---|
| Raw Material Options | Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire |
| Wire Diameter Range | 0.1-8 mm |
| Surface Treatment Options | Zinc plating, Nickel plating, Silver plating, Gold plating, Tin plating, Galvanizing in various colours, Dacromet, Black oxide, Phosphating |
| Standard | ISO, non-standard and OEM drawings |
| Processing Route | Material sourcing → Coiling and forming → Heat treatment → Surface treatment → Quality inspection → Packing → Shipping |
| Inspection Equipment | Grinding and shot peening machinery; Precision tensile strength testers; Magnetic powder flaw detectors |
| Packing | Plastic bags, cartons or pallets, or packing to your own specification |
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, 30% deposit before production, 70% balance before shipment |
| Lead Time | 7-15 days after the order is confirmed |
| Minimum Order Quantity | Quoted per part — tell us your requirement (TBC) |
| Dimensions and Load Rating | Made to your drawing or sample (TBC per part) |
Every batch follows the same seven step route, with tensile testing and magnetic powder flaw detection carried out before packing.
Available in Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire, in wire from 0.1-8 mm, with any of our nine surface finishing routes. Geometry, end treatment and finish are all specified per order.
ISO 9001, SGS certificate and RoHS report (stated on the legacy site, certificates pending re-confirmation). Certificate copies are sent on request once re-confirmed.
Against the double solid hole clamp, the single hole version is for constrained access. Where both ears are reachable, the double hole clamp is easier to fit.
The clamping force is the same. The difference is in fitting access, not in holding performance.
Toward the access direction. Tell us the orientation constraint and we will specify accordingly.
It is much easier with them. Tell us if tool-free fitting is essential and we will confirm what is practical.
Send your drawing, dimensions or a sample. We will confirm the specification and come back with a price and a lead time.
