Specifying a Sculpture for a Hotel Lobby
Lobby pieces have constraints that garden pieces do not: fixed ceilings, live operations and a delivery route through a finished building.
Wall Decorations
Stainless Steel Hammered Pattern Wall Decoration
Stainless Steel Hammered Pattern Wall Decoration is a titanium gold plated 316 stainless steel wall panel built to order in our Shenzhen workshop.
Product Overview
What This Piece Is
Stainless Steel Hammered Pattern Wall Decoration is a titanium gold plated 316 stainless steel wall panel built to order in our Shenzhen workshop.
Wall panels cover a large plain surface at a fraction of the cost of a freestanding piece and take no floor area at all.
316 stainless steel carries molybdenum, which is what makes it hold up in salt air and around chlorinated water far better than standard grades.
Send the position, the height you have in mind and any drawing you already have, and a quotation follows.
Stainless Steel Hammered Pattern Wall Decoration produced by Xinhengda Sculpture in Shenzhen
Key Benefits
Why Buyers Specify This Piece
- Specified in 316 stainless steel for coastal, poolside and fountain positions where salt and chlorine attack ordinary steel.
- Titanium gold PVD plating bonds into the surface in a vacuum chamber rather than sitting on it as paint, so the colour does not chip off an edge.
- The hammered face breaks reflections into hundreds of small facets, so the panel reads as light and movement rather than as a mirror.
- Lighting can be designed into the wall panel so it still reads after dark, with the cable route concealed inside the structure.
- At large scale this wall panel is trial assembled in the workshop, then split into transportable sections with the joints placed where they will not be seen.
- Wall panels cover a large plain surface at a fraction of the cost of a freestanding piece and take no floor area at all.
- Anything about this wall panel that has to change for hotel lobbies is settled on the drawing, where changes still cost nothing.
Application Scenarios
Where It Is Installed
Placed in a hotel lobby, on an arrival axis or beside a reception desk, where it is the first object a guest registers.
Used in a mall atrium, a retail entrance or a showroom, as a fixed point that shoppers photograph and navigate by.
Placed in a living room, a corridor or a private garden, at a scale that suits a domestic ceiling height.
Fitted in a restaurant, a bar or a KTV room, where the piece has to read under low and coloured lighting.
Who It Is For
The People Who Order This
- Main contractors who need the wall panel, the base plate and the crate quoted as one package
- Private clients commissioning a single titanium gold plated wall panel for hotel lobbies
- Architects matching a wall panel to a material palette that already uses 316 stainless
- Facility and estate managers replacing a tired feature in hotel lobbies with something that needs no repainting
Problems It Solves
What This Piece Removes From the Project
- Sculptures near the sea or over a water feature pick up pitting within a season if the wrong grade is used. 316 is the grade that answers that.
- Gold coloured paint scuffs on handling and dulls under cleaning. A PVD coating is far harder and takes normal cleaning without losing tone.
- Large flat metal panels look industrial. Hammering gives the same sheet a handmade surface that carries shadow.
- Suppliers who subcontract the finishing cannot answer for the surface. The 316 stainless steel here is cut, welded and titanium gold plated under one roof.
- Getting a wall panel into hotel lobbies is usually harder than the design assumed. Access is checked before the piece is built, not on delivery day.
Technical Features
How It Is Constructed
- Concealed hanging system with a levelling adjustment behind the panel
- Titanium gold PVD coating applied in a vacuum chamber over a polished base
- Hammered by hand so no two facets repeat across the panel
- Accelerated weathering carried out before dispatch so the colour is established on arrival
- Fabricated throughout in 316 stainless steel with matching filler where the material is welded
- Internal frame sized to this wall panel rather than taken from a standard section list
Specifications
Recorded Specification
| Material | 316 stainless steel |
|---|---|
| Finish | Titanium gold PVD plating and Hammered texture |
| Form | Wall Panel |
| Category | Wall Decorations |
| Size | Quoted per project |
| Minimum Order | Quoted per project |
| Placement | Indoor |
| Lighting | Integrated lighting available |
| Packing | Foam lined plywood crate built to the finished geometry |
| Origin | Shenzhen China |
Dimensions, weight and lead time for this wall panel are confirmed with the quotation, because it is built to your drawing rather than to a wall decorations catalogue size.
Materials
What It Is Made From
- 316 stainless steel
- Integrated LED components where lighting is specified
- Stainless or galvanised fixings sized for this wall panel and supplied with it
Manufacturing Process
How It Is Made
1
Laser cutting of 316 sheet to the developed pattern
2
Cold forming of each panel over shaped bucks
3
TIG welding with matched 316 filler wire
4
Weld dressing and levelling across every seam
5
Polishing or texturing to the specified finish
6
Pickling and passivation to restore the passive layer after welding
Quality Control
What Is Checked and When
- Mill grade verified on the incoming sheet
- Filler wire matched to the parent grade and recorded
- Welds dressed and checked for undercut before polishing
- Passivation completed after all hot work
- Drainage points on water-facing pieces checked to be clear
Customisation Options
What Can Be Changed
- The wall panel split into transportable sections where access to hotel lobbies is restricted
- Lighting designed into the wall panel with the cable route concealed
- Your own branding applied to the wall panel for resale as OEM or ODM work
Comparison
How It Compares With the Alternatives
Compared with 304 stainless steel
304 is the sensible choice inland. Within reach of salt spray or chlorinated water, 316 is worth the difference because it resists pitting that 304 will eventually show.
Compared with Buying through a trading company
A trader passes drawings along and adds a margin. Here the wall panel is drawn and built by the same people you are talking to.
Compared with An imported gallery piece
A gallery wall panel arrives as it is. Working direct with the workshop means the size, the titanium gold PVD plating and the base for hotel lobbies are decided before anything is cut.
Use Guide
Looking After It Once It Is Installed
- Rinse down with fresh water after storms or pool servicing
- Wash with a neutral detergent, then dry to avoid water spotting
- Inspect drainage holes on water features twice a year
- Avoid chloride based cleaners of any kind
- Clean with a soft damp cloth only. Abrasive pads will eventually dull a PVD surface.
Related Products
Other Pieces in Wall Decorations
Wall Decorations
Modern Stainless Steel Metal Indoor and Outdoor Heart-Shaped Mirror
View details
Wall Decorations
Modern Stainless Steel Metal Convex Mirrors Wall Panel
View details
Wall Decorations
Modern Stainless Steel Metal Indoor and Outdoor Pebble Creative Wall Panel Design A
View details
Wall Decorations
Modern Stainless Steel Metal Indoor and Outdoor Floor-Standing Mirror
View details
Frequently Asked Questions
Why 316 stainless steel rather than something cheaper
316 stainless steel carries molybdenum, which is what makes it hold up in salt air and around chlorinated water far better than standard grades. Sculptures near the sea or over a water feature pick up pitting within a season if the wrong grade is used. 316 is the grade that answers that.
Is the gold colour paint or plating
It is a titanium PVD coating applied in a vacuum chamber, not paint. That is why it survives cleaning and handling far better than a gold coloured lacquer.
Is the hammered pattern machine pressed or hand worked
It is worked by hand, which is why the facets are irregular. A pressed pattern repeats and reads mechanical at close range.
How is a wall panel this size packed and shipped
A plywood crate is built around the finished geometry with foam on every titanium gold plated face. Large wall panels are split into sections at joints chosen during design, trial assembled in the workshop, then marked so they go back together in the same order on site.
What do you need from me to quote
The position, the height or overall size you want, and any drawing, render or reference photograph you already have. For hotel lobbies a photograph of the space is often enough to start.
What is the lead time
Lead time depends on the size of the wall panel, the titanium gold PVD plating and how much design work it needs, so it is confirmed with the quotation rather than promised in advance. Send the brief and the schedule comes back with the price.
Quote This Piece for Your Project
Send the position, the height you want and any drawing you have. The quotation comes back against your figures, not against a catalogue size.