LED Light for Work
The SLL-0702-24-M is a 4 inch round LED work light designed for off-road machines that operate in low light, dust, and vibration. Twenty-four 1W Osram LEDs deliver 1920 effective lumens in a wide flood beam pattern, providing even illumination across the immediate work zone on excavators, forklifts, and utility vehicles. The die-cast aluminium housing with UV-resistant polycarbonate lens is sealed to IP68 and operates reliably from 9 to 32V DC, making it compatible with both 12V and 24V systems. Overvoltage and overheat protection ensure stable performance under harsh electrical conditions.
- 24 x 1W Osram LEDs provide 1920 effective lumens in a wide flood beam, eliminating dark edges around the work area
- IP68 sealing and a durable polycarbonate lens resist water, dust, and impact during daily operation and pressure washing
- 9 to 32V DC operating range allows the same part number to be used on 12V and 24V machines, reducing SKU complexity
- Overvoltage and overheat protection prevent damage from electrical surges and high ambient temperatures
- Die-cast aluminium housing with UV-resistant polyester powder coating resists corrosion and fading in direct sunlight
Where This Lamp Is Used
- Front and side work lighting on excavators and loaders operating in night shifts or underground tunnels
- Deck and platform lighting on service trucks and utility vehicles used in remote or poorly lit areas
- Forklift cab and mast lighting for warehouse operations where visibility is critical during night shifts
- Auxiliary lighting on engineering vehicles and mining support machines exposed to vibration and dust
- Rear work zone illumination on tipper trucks and hook lift bodies during loading and unloading
Who It Is For
- Distributors of industrial vehicle lighting needing a single part number for both 12V and 24V fleets
- Machinery OEMs integrating work lights into production lines with consistent mounting and electrical specs
- Fleet operators replacing halogen lamps that fail under vibration and draw excessive current
- 4x4 accessory brands building a private label work light line with reliable performance and long life
- Equipment dealers fitting lights on machines sold to customers in harsh environments
Problems It Solves
- Halogen work lights burn out quickly under vibration and draw more current than LED alternatives
- Cheap sealed lights fail after a few wash cycles due to water ingress through the cable entry
- Narrow beam lights leave the edges of the work zone dark, increasing risk of accidents
- Non-IP68 sealed lights fog up or fail when exposed to high humidity and temperature swings
- Lamps not rated for 9 to 32V DC require different models for 12V and 24V systems, increasing inventory
Technical Features
- Twenty-four 1W Osram LEDs with a raw output of 2400 lumens and 1920 effective lumens
- Wide flood beam pattern with consistent illumination across the work area
- Bare wire lead of 40cm as standard, with overvoltage and overheat protection built into the circuit
- Operating range of 9 to 32V DC, compatible with 12V and 24V vehicle systems
- Rated for -40 to +85 degrees Celsius, suitable for extreme cold and hot environments
- IP68 sealing protects against water immersion and dust ingress during operation and cleaning
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-0702-24-M |
|---|---|
| Max Power | 24W |
| Real Power | 24W |
| LED | 24 pcs x 1W Osram |
| Beam Pattern | Wide Flood |
| Colour Temperature | 6000K |
| Operating Voltage | 9 to 32V DC |
| Lens Material | Anti-UV polycarbonate |
| Bracket Material | Die-cast aluminium |
| Waterproof Rating | IP68 |
| Operating Temperature | -40 to +85 degrees Celsius |
| Electrical Connection | Bare wire 40cm, overvoltage and overheat protection |
| Certification | CE, RoHS |
Materials Used
- Anti-UV polycarbonate lens with scratch-resistant coating
- UV-resistant polyester powder coating on the housing
- Silicone gasket and sealed cable entry for IP68 protection
- Bare wire lead with overvoltage and overheat protection circuit
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating with UV-resistant polyester finish
LED board assembly with 24 x 1W Osram emitters
Lens bonding and gasket sealing for IP68 integrity
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP68 rating using water immersion and dust exposure tests
- Vibration testing on a vibration test machine to simulate machine-mounted operation
- Salt spray corrosion testing on the housing coating and bracket
- High and low temperature alternating humidity testing across the -40 to +85 degrees Celsius range
Customisation Options
- Deutsch connector instead of the standard 40cm bare wire lead
- Spot beam optics in place of the wide flood pattern
- Private label logo on the housing and printed carton
- Alternative cable length to match a specific machine harness
- Mixed cartons combining this lamp with other SUNLITEC models for trial orders
How It Compares With the Alternatives
| Round 3 inch work lamp | Higher output and wider beam coverage despite similar mounting footprint |
|---|---|
| Spot beam version of the same lamp | Flood pattern illuminates the immediate work zone evenly while spot reaches further ahead but leaves edges dark |
| Larger 6 inch work lamp | Lower output but fits tight spaces like cab pillars and guard rails where a 6 inch body cannot clear |
How to Fit and Use It
- Leave a drip loop in the 40cm lead to prevent water from running into the cable gland
- Aim the flood beam at the immediate work area close to the machine and use a separate spot lamp for long-distance visibility
- Clean the polycarbonate lens with water and a soft cloth only—avoid solvents that can degrade the anti-UV coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 9 to 32V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is CE and RoHS compliant, which meets basic electrical and environmental safety standards for road use.
Get a Price on LED Light for Work
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.