PH352 Platform Hand Truck
A deck on four casters with a push handle — for loads that will not balance on two wheels.
Published Specification
- ModelPH352
- Weight(kg)59.9
- Load Capacity(kg)500
- Caster10"
- Body Size(mm)1866*913*1000*360
Include the quantity, your destination port or market and your company name. Renwei states that enquiries are answered within 12 hours.
What This Model Is
The PH352 is a platform hand truck from the Qingdao Renwei catalogue. It is published at a rated load of 500kg, the wheel specification is 10", and the body measures 1866 x 913 x 1000 x 360mm.
Every figure on this page is taken from the published Renwei specification for this model; nothing has been estimated to fill a gap.
What the Specification Tells a Buyer
Published rated load
This model is listed at 500kg. It is a per-model figure from the source catalogue, not a range quoted for the whole series. Check it against your own site handling limit before specifying.
Wheel published as 10"
The wheel size is published so a replacement can be matched exactly. The same wheel families are sold separately on this site, so spares match the machine.
Dimensions given in full
The published body size is 1866 x 913 x 1000 x 360mm. Check it against the narrowest route or the space it has to occupy before ordering.
Own weight published
The published weight of 59.9kg tells you how the unit handles empty, which decides whether one person can lift or load it.
Matched spares from the same catalogue
Wheels, casters and tubes are published here as their own models with their own specifications, so a worn part can be ordered by model number instead of described over email.
Full Published Specification
Every value below is taken from the Renwei catalogue entry for this model. Rows marked as not published are shown rather than hidden, so you know exactly which questions to ask.
| Model | PH352 |
|---|---|
| Weight(kg) | 59.9 |
| Load Capacity(kg) | 500 |
| Caster | 10" |
| Body Size(mm) | 1866*913*1000*360 |
| Wheel | Not published on the source site |
| QTY | Not published on the source site |
Reading this table
Body size is given as four figures: deck length, deck width, handle height and the fourth reference dimension from the source drawing.
How the PH352 Compares Within the Family
Published Load Capacity(kg) for this model set against its neighbours in the Platform Hand Truck family. Figures are as published; no model is shown with an estimated value.
| Model | Load Capacity(kg) |
|---|---|
| PH352 | 500 |
| PH358 | 600 |
| PH359 | 500 |
| PH362 | 1500 |
| PH348 | 300 |
What Is Published and What to Ask
The source catalogue publishes wheel and dimension data for this model but does not publish the frame or tray material. Ask for the material and coating specification against the model number before ordering.
Before you order
Minimum order quantity, lead time, payment terms, warranty and certifications are not published by Renwei. Ask for all five in writing against this model number before planning a shipment.
Getting the Best From This Model
- Keep pneumatic wheels at the pressure marked on the tyre sidewall; an under-inflated wheel rolls badly and damages its own sidewall.
- Check wheel fixings after the first week of use and then periodically — most wheel failures start as a loose fixing.
- Check the rated load against what you actually intend to carry, and remember that dense material reaches the limit long before the body is full.
- Load over the axle rather than at the far end, so the weight sits on the wheels instead of on the operator.
Solutions Relevant to This Model
Wheel and Caster Matching
Spare Parts and After Sales
Container Load Planning
PH352 Platform Hand Truck Questions
What load is the PH352 rated for?
The source catalogue publishes 500kg for this model. It is a per-model figure, so use it rather than a figure quoted for the Platform Hand Truck range as a whole.
Can I get replacement wheels for the PH352?
This model is published with a wheel specification of 10". Matching wheels are sold as separate models on this site. Send that size together with your axle diameter and hub length and Renwei will confirm the match.
What is the minimum order quantity and lead time?
Neither is published on the source site, so neither is stated here. Send this model number with the quantity you are considering and ask for both in writing before you plan a shipment.
Are certificates or test reports available for the PH352?
The source site publishes no certification list, so none is claimed on this page. Request the specific certificates your market requires and ask for them in writing before ordering.
Technical Reading
Caster Load Ratings Explained
Choosing a Hand Truck
Matching Wheel Material to Your Floor
Quote the PH352 Platform Hand Truck
Send this model number with the quantity you need, your destination port or market, and your company name.