213 T Plate
213 T Plate is a T shaped flat plate for joining a member that meets another at right angles in the same plane, such as a cross rail into a stile. It is supplied in a 100 x 100 x 19 x 2.0 mm section. This model is listed in one size, 100 x 100 x 19 x 2.0 mm.
Available Sizes
- 100 x 100 x 19 x 2.0 mm
What This Model Gives You
- T geometry suits a rail meeting a stile in one plane
- Flat 2.0 mm section sits close to the surface
- Punched on all three arms so the load is shared
How It Is Built
- Three arm T form
- Punched fixing holes on each arm
Application Scenarios
- Door and gate frame joints
- Furniture rail joints
- Panel and sign framing
Who It Is For
- Joinery and door frame makers
- Furniture manufacturers
- Sign and panel fabricators
Problems It Solves
- A butt joint between a rail and a stile has almost no mechanical strength
- Surface fixings that stand proud interfere with panels and glazing
213 T Plate Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 213 |
|---|---|
| Product Type | T Plate |
| Sizes | 100 x 100 x 19 x 2.0 mm |
| Number of Sizes | 1 |
| Material Thickness | 2.0 mm |
| Material | Cold rolled steel strip |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Cold rolled steel strip
Manufacturing Process
- Blanking
- Punching
- Deburring
- Surface finishing
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Flat mending plates
A mending plate cannot take a load that comes in at right angles from a third member; the T plate can.
Use Guide
- Set the long arm along the continuous member and the short arm on the incoming rail.
- Use screws short enough not to break through the back face of a 19 mm rail.
Others in This Family
Further Reading
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Corner Brace vs Mending Plate Which Reinforcement to Use
Both parts reinforce a joint, and they are not interchangeable. The choice is decided by the geometry of the joint, not by which...
Questions About the 213 T Plate
Can this be supplied in other sizes?
Other sizes are run to order once the volume justifies a tool change.
Which finishes are available?
Zinc plated, black and hot dipped galvanized are all run across the flat plate lines.
Can I get a sample of the 213 T Plate before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 213 T Plate
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.