207 Heavy Duty Angle Support
207 Heavy Duty Angle Support is a gusseted angle support in a heavy section, used where a shelf, beam or bench has to carry a real structural load rather than a domestic one. The size ladder runs up to a 380 mm leg on the heaviest version. This model is listed in 10 sizes, from 50 x 50 x 40 x 3.5 mm to 380 x 380 x 40 x 5.0 mm.
Available Sizes
- 50 x 50 x 40 x 3.5 mm
- 75 x 75 x 40 x 3.5 mm
- 100 x 100 x 40 x 3.5 mm
- 150 x 150 x 40 x 5.0 mm
- 150 x 200 x 40 x 5.0 mm
- 200 x 200 x 40 x 5.0 mm
- 250 x 250 x 40 x 5.0 mm
- 250 x 300 x 40 x 5.0 mm
- 300 x 300 x 40 x 5.0 mm
- 380 x 380 x 40 x 5.0 mm
What This Model Gives You
- Gusseted form resists the bending that opens a plain angle bracket
- Heavy sections up to 5.0 mm on the larger sizes
- Bolt sized holes rather than screw holes on the heavy sizes
How It Is Built
- Gusset between the legs
- Heavy gauge section
- Bolt clearance holes
Application Scenarios
- Industrial shelving and mezzanine edges
- Machine base and bench supports
- Timber frame connections
- Heavy workbench brackets
Who It Is For
- Industrial shelving and racking builders
- Machine and workbench fabricators
- Construction and timber framing contractors
Problems It Solves
- Plain angle brackets open out under a sustained structural load
- Field welding a bracket on site is slow and needs a hot work permit
207 Heavy Duty Angle Support Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 207 |
|---|---|
| Product Type | Heavy Duty Angle Support |
| Sizes | 50 x 50 x 40 x 3.5 mm · 75 x 75 x 40 x 3.5 mm · 100 x 100 x 40 x 3.5 mm · 150 x 150 x 40 x 5.0 mm · 150 x 200 x 40 x 5.0 mm · 200 x 200 x 40 x 5.0 mm · 250 x 250 x 40 x 5.0 mm · 250 x 300 x 40 x 5.0 mm · 300 x 300 x 40 x 5.0 mm · 380 x 380 x 40 x 5.0 mm |
| Number of Sizes | 10 |
| Material Thickness | 3.5 - 5.0 mm |
| Material | Hot rolled steel |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Hot rolled steel
Manufacturing Process
- Blanking
- Punching
- Press forming
- Welding of the gusset
- Surface finishing
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Plain corner braces
The gusset is what stops the angle opening. Where the load is structural rather than decorative, the gusseted support is the correct part.
Use Guide
- Bolt rather than screw these supports where the load is structural.
- Fit the gusset on the compression side of the joint.
Questions About the 207 Heavy Duty Angle Support
Are these supplied galvanized?
Hot dipped galvanizing is available to order on the heavy support lines.
What is the difference between the 206, 207 and 208 versions?
They differ in gusset depth and section thickness. The 208 has the deepest gusset and is the heaviest of the three.
Which sizes of the 207 Heavy Duty Angle Support are available?
This model is listed in 10 sizes: 50 x 50 x 40 x 3.5 mm, 75 x 75 x 40 x 3.5 mm, 100 x 100 x 40 x 3.5 mm, 150 x 150 x 40 x 5.0 mm, 150 x 200 x 40 x 5.0 mm, 200 x 200 x 40 x 5.0 mm, 250 x 250 x 40 x 5.0 mm, 250 x 300 x 40 x 5.0 mm, 300 x 300 x 40 x 5.0 mm, 380 x 380 x 40 x 5.0 mm. Sizes between the listed steps are run to order.
Can I get a sample of the 207 Heavy Duty Angle Support before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 207 Heavy Duty Angle Support
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.