205 Corner Brace
205 Corner Brace is a right angle corner brace used to hold and reinforce 90 degree joints in furniture, crates and light framing. The size ladder is wide, so one profile can cover everything from a chair rail joint to a crate corner. This model is listed in 3 sizes, from 38 x 38 x 38 x 1.8 mm to 63 x 63 x 38 x 1.8 mm.
Available Sizes
- 38 x 38 x 38 x 1.8 mm
- 50 x 50 x 38 x 1.8 mm
- 63 x 63 x 38 x 1.8 mm
What This Model Gives You
- Wide size ladder from small furniture sizes upward
- Punched holes on both faces for screws or bolts
- Flat form packs densely, which keeps freight cost per piece low
How It Is Built
- Right angle form
- Punched fixing holes on both faces
Application Scenarios
- Chair and table frame reinforcement
- Crate and case corners
- Cabinet carcass joints
- General furniture repair
Who It Is For
- Furniture and chair manufacturers
- Crate and packaging makers
- Hardware retailers selling repair hardware
- Flat pack assembly suppliers
Problems It Solves
- Glued furniture joints loosen once the frame is moved repeatedly
- Crate corners split where the fastening is a nail into end grain
205 Corner Brace Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 205 |
|---|---|
| Product Type | Corner Brace |
| Sizes | 38 x 38 x 38 x 1.8 mm · 50 x 50 x 38 x 1.8 mm · 63 x 63 x 38 x 1.8 mm |
| Number of Sizes | 3 |
| Material Thickness | 1.8 mm |
| Material | Cold rolled steel strip |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Cold rolled steel strip
Manufacturing Process
- Blanking
- Punching
- Press forming
- Surface finishing
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Mending plates
A corner brace works across a 90 degree joint; a mending plate works along a flat splice. They are not interchangeable.
Use Guide
- Fit the brace on the inside of the joint when it must not be seen, and on the outside when strength matters more than appearance.
- Pre-drill hardwood so the screw does not split the timber at the joint.
Others in This Family
Further Reading
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Corner Brace vs Mending Plate Which Reinforcement to Use
Both parts reinforce a joint, and they are not interchangeable. The choice is decided by the geometry of the joint, not by which...
Questions About the 205 Corner Brace
Which size suits a chair frame joint?
The smaller sizes in the ladder are the usual choice for chair and cabinet frames; larger sizes are used for crates and light framing.
Can these be supplied plated?
Yes. Zinc plated, black and hot dipped galvanized finishes are run on the corner brace lines.
Which sizes of the 205 Corner Brace are available?
This model is listed in 3 sizes: 38 x 38 x 38 x 1.8 mm, 50 x 50 x 38 x 1.8 mm, 63 x 63 x 38 x 1.8 mm. Sizes between the listed steps are run to order.
Can I get a sample of the 205 Corner Brace before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 205 Corner Brace
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.