LED Track Lights
Aimable commercial track heads from 10W to 40W, with CREE and Osram chips, CRI up to 90 and beam angles from 15 to 60 degrees.
Every Track Light We Build
Nine track head models covering the range a retail or hospitality buyer actually needs: fixed-beam heads for accent work, zoomable heads that let the installer set the beam on site, and built-in driver heads that avoid a separate driver box above the ceiling. All of them run on 220-240VAC and take 2, 3 or 4 wire adapters, so a single rail layout can be built out of one supplier's parts.
2 Wire 30W LED Track Light
20W LED Track Light Built-In Driver
4 Wire 40W LED Track Light
4 Wire 10W LED Track Light
30W Zoomable LED Track Light
40W Zoomable LED Track Light
20W Zoomable LED Track Light
30W 3900lm LED Track Light
10W Zoomable LED Track Light
Buyers This Range Was Built For
- Lighting importers building a commercial track range for their catalogue
- Electrical wholesalers supplying shopfitters and electrical contractors
- Lighting designers specifying beam angle and wattage zone by zone
- Retail and hospitality FF&E buyers replacing halogen spots with LED
- Contract manufacturers looking for an OEM track head platform
Where It Gets Used
- Fashion floors where garment colour must match the catalogue
- Jewellery and watch counters needing a tight 15 degree beam
- Supermarket fresh produce and bakery aisles
- Hotel lobbies and reception walls
- Showrooms, galleries and museum displays
What Goes Wrong Without It
- Halogen and metal halide spots that burn several times the power for the same visual brightness
- Low-CRI LED heads that flatten reds and browns on merchandise and food displays
- Fixed-beam fittings that cannot be re-aimed when the store layout changes
- Heads bought separately from the rail, where the adapter turns out not to fit on site
- Cheap drivers that flicker on camera and fail early in a warm ceiling void
What You Get From This Range
- CRI above 90 on the CREE-based heads, which is what colour-critical retail needs
- Beam angles from 15 to 60 degrees, fixed or manually zoomable per model
- Lifud flicker-free drivers across the range
- 2, 3 and 4 wire adapters so heads match the installed rail
- Triac and DALI dimming versions available on most models
- 355 degree rotation and 90 degree tilt for re-aiming after a refit
- Colour temperatures from 2700K to 6000K set at order
Where This Range Is Specified
Retail Store Lighting
Track and downlight packages for fashion, jewellery and speciality retail where merchandise colour has to survive the lighting.
Supermarket Lighting
High-output track heads and recessed downlights for fresh food, aisles and back of house on separate switched circuits.
Hotel And Hospitality Lighting
Low-glare recessed downlights and aimable track heads for lobbies, corridors, guestrooms and restaurants.
Showroom And Gallery Lighting
Zoomable and fixed-beam track heads with CRI above 90 for spaces where the display changes and the colour has to be right.
Villa And Residential Lighting
Recessed downlights and compact track heads for villas and high-end apartments where the ceiling detail matters.
Other Fixtures For The Same Project
Frequently Asked Questions
What is the difference between your fixed and zoomable track lights?
On a fixed head the beam angle is set at production and cannot be changed. On a zoomable head the installer turns the optic to move the beam between roughly 15 and 60 degrees. Zoomable costs more but removes the risk of ordering the wrong angle.
Which wire count should I order?
Match the rail. Two-wire runs one circuit, three-wire gives two switched groups, four-wire gives three. The systems are not interchangeable, so confirm the installed rail before ordering.
Do you supply dimmable versions?
Triac and DALI versions are available on most models and must be chosen at order. Dimming cannot be retrofitted in the field.
What CRI can you hold?
The CREE-based heads run CRI above 90. Lower-cost models using other chips run above 80. Ask for the exact model before you specify.
Can you supply photometric files?
Yes. We supply IES files and can run Dialux calculations for your layout before you fix the head count.
Can you make an OEM version?
Yes. We can produce a 3D drawing within 2 days of your idea and a mock-up sample within 3 days. Housing colour is changed in our own powder coating plant.
Get A Quote On LED Track Lights
Tell us the models, quantities, colour temperature and beam angles. If the specification is not settled, send the ceiling plan and we will work it out first.