FSD-2010SS Digital LCD Conveyor Metal Detector
The FSD-2010SS is the entry point into the FSD conveyor range: a digital LCD conveyor metal detector for packaged and bulk food inspection lines. It covers the same job as the rest of the family, inline detection of metal contamination before product leaves the line, with an LCD interface rather than a touchscreen.
Key benefits
- Inline metal contamination check on packaged and bulk food
- Digital LCD interface for straightforward operator use
- Conveyor format that drops into an existing line layout
- Part of the FSD family, so parts and service are shared across models
Problems it solves
- Product leaves the line with no inline metal check at all
- Manual inspection cannot cover full production volume
- Mixed detector brands on one site complicate spares and training
Who it is for
- Processors adding a first inline detector to an existing line
- QA teams needing a documented check point on packaged output
- Buyers standardising on the FSD range for parts commonality
Application scenarios
- Packaged food lines adding a final foreign-object check
- Bulk food handling before filling or packing
- Sites standardising on one detector family across several lines
Technical features
- Digital LCD operator interface
- Conveyor transport for inline installation
Specifications
| Type | Digital LCD conveyor metal detector |
|---|---|
| Application | Packaged and bulk food inspection lines |
| Detection Window | TBC - confirm with the supplier for your pack size |
| Conveyor Speed | TBC - confirm against your line speed |
| Power Supply | TBC - confirm for your site voltage |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The FSD-2020S adds a touchscreen with 12 stored product settings, the FSD-2023 publishes its sensitivity figures, and the FSD-2025 adds multi-frequency detection for salty, wet and frozen product. The FSD-2010SS is the simpler LCD-based unit in the same family.
Use guide
- Install inline after final packing or before filling
- Confirm the aperture clears your largest pack before ordering
- Verify detection with test pieces at commissioning
- Repeat verification at the interval set by your food safety plan
Where this product is used
Part of Industrial Metal Detectors for Food Processing ยท typically specified for:
FSD-2010SS Digital LCD Conveyor Metal Detector FAQ
What detection sensitivity does it reach
The published source material does not state a figure for this model. Ask us on WhatsApp with your product type and we will confirm before you order.
What aperture sizes are available
Aperture is matched to the pack size. Send your dimensions and we will confirm.
How does it differ from the FSD-2020S
The FSD-2020S adds a touchscreen, 12 stored parameter sets and automatic product-effect learning.
Is it suitable for wet or frozen product
For difficult product effect the FSD-2025 with multi-frequency combination detection is the better fit.
What is the lead time
Lead time depends on configuration. Message us on WhatsApp with your requirement.
Can you supply spare belts
Yes. Confirm the belt type and width with us and we will quote spares with the machine.
Quotation for the FSD-2010SS Digital LCD Conveyor Metal Detector
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.