ABX-5010-SC3A Full-Body X-Ray Screening System
The ABX-5010-SC3A is the throughput version of the full-body line: under 3 seconds per scan and at least 1,200 persons per hour, with AWG40 wire detectability and 1.0 mm spatial resolution. Dose stays under 0.20 uSv per scan and leakage under 0.17 uSv/h at 50 cm. Like the rest of the ABX-5010 family it uses three-joint construction so a site is not closed for a long structural install.
Key benefits
- Under 3 seconds per scan, the fastest cycle in the ABX-5010 line
- At least 1,200 persons per hour through a single lane
- AWG40 wire detectability with 1.0 mm spatial resolution
- Leakage under 0.17 uSv/h at 50 cm around the cabinet
- Three-joint construction for faster installation and alignment
Problems it solves
- Peak arrivals overwhelm a lane rated below 1,000 persons per hour
- Adding a second lane is not possible in the available entrance width
- Slow scan cycles push queues outside the building
- Long installation windows are not available at an operating site
Who it is for
- Operators whose existing lane cannot clear peak arrivals
- Integrators upgrading throughput without adding a second lane
- Distributors supplying high-throughput full-body screening
Application scenarios
- Passenger facilities with tight scheduled arrival peaks
- Public venues where queue time is the operational complaint
- Commercial buildings screening large staff populations at shift start
- Industrial and transport sites replacing a slower existing lane
Technical features
- Real-time image capture with black-and-white and colour overlay
- Zoom, enhancement, filters and contrast control
- Storage for up to 1,000,000 images with USB transfer
- Continuous operation at 0.17 m/s conveyor speed
- 2.1 m scanning height
Specifications
| Dimensions | 2610 x 2300 x 2600 mm |
|---|---|
| Weight | 1000 kg |
| Scanning Height | 2.1 m |
| Single Inspection Dose | under 0.2 uSv |
| X-Ray Leakage | under 0.17 uSv/h at 50 cm |
| Wire Detectability | AWG40 |
| Spatial Resolution | 1.0 mm |
| Single Scan Time | under 4 seconds |
| Throughput | 1,200 persons per hour or more |
| Conveyor Speed | 0.17 m/s |
| Power | 800 W, 180-240 V AC, 50 Hz plus or minus 3 Hz |
| Warranty | 1 year |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The SC3A is the SC3 with throughput raised from 1,000 to 1,200 persons per hour and detectability from AWG38 to AWG40, in the same 2610 x 2300 mm footprint at 1000 kg instead of 800 kg. The SC3A-DV adds the second view where coverage rather than speed is the issue.
Use guide
- Verify floor loading for 1000 kg before delivery
- Assemble the three-joint structure and align the sections
- Connect 180-240 V AC at 50 Hz plus or minus 3 Hz
- Hold continuous operation at peak rather than batching arrivals
- Use contrast and filter controls before deciding on a manual re-check
Where this product is used
Part of Multi-Zone Walk-Through Metal Detectors ยท typically specified for:
ABX-5010-SC3A Full-Body X-Ray Screening System FAQ
How fast is a single scan
Under 3 seconds, supporting at least 1,200 persons per hour.
How does it compare with the SC3
Same footprint class, higher throughput and AWG40 rather than AWG38 wire detectability, at 1000 kg instead of 800 kg.
What is the radiation leakage
Under 0.17 uSv/h measured at 50 cm, with under 0.2 uSv per inspection.
What height does it scan
2.1 m scanning height.
What power supply is needed
800 W at 180-240 V AC, 50 Hz plus or minus 3 Hz.
How many images are stored
Up to 1,000,000 images with USB transfer support.
What is the lead time
Lead time depends on configuration and destination. Message us on WhatsApp with your quantity and port.
Quotation for the ABX-5010-SC3A Full-Body X-Ray Screening System
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.