ABX-5010-SC3 Full-Body X-Ray Screening System
The ABX-5010-SC3 is a full-body transmission screening system built for lanes that have to clear at least 1,000 persons per hour. Each scan finishes in under 4 seconds at less than 0.20 uSv, with AWG38 wire detectability and 1.0 mm spatial resolution on a 24-inch TFT display. The three-joint construction is the part that matters on site: it goes together and aligns without a long structural installation.
Key benefits
- At least 1,000 persons per hour sustained through one lane
- Under 0.20 uSv per full-body scan with scan time below 4 seconds
- Three-joint construction shortens installation and alignment on site
- Continuous cyclic inspection mode avoids stop-start operation
- X-ray leakage below 0.19 uSv/h at 50 cm around the cabinet
Problems it solves
- Manual secondary searches cap how many people a lane can clear per hour
- Structural installation work closes an entrance for too long
- Stop-start screening cycles waste time between subjects
- Operators cannot retrieve the image behind a decision made earlier
Who it is for
- Operators whose constraint is throughput rather than lane count
- Integrators installing into existing buildings with limited downtime
- Distributors supplying full-body screening to transport and venue clients
Application scenarios
- Transport facilities with sustained passenger flow through fixed lanes
- Public buildings screening high visitor volumes at set opening hours
- Industrial sites screening a full shift through a single gate
- Large event venues where queue length decides the visitor experience
Technical features
- 24-inch TFT display with real-time capture and colour overlay
- Enhancement, zoom, filters and image retrieval
- Continuous cyclic inspection mode
- Storage for up to 1,000,000 pictures with USB transfer
- Conveyor speed 0.17 m/s
Specifications
| Dimensions | 2610 x 2300 x 2600 mm |
|---|---|
| Weight | 800 kg |
| Scanning Height | 2 m |
| Single Inspection Dose | under 0.2 uSv |
| X-Ray Leakage | under 0.19 uSv/h at 50 cm |
| Wire Detectability | AWG38 |
| Spatial Resolution | 1.0 mm |
| Throughput | 1,000 persons per hour or more |
| Conveyor Speed | 0.17 m/s |
| Power | 800 W, 180-240 V AC, 50 Hz plus or minus 3 Hz |
| Image Storage | 1,000,000 pictures |
| Warranty | 1 year |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The SC3 and the SC3A share the same footprint class; the SC3A raises throughput to at least 1,200 persons per hour with AWG40 detectability, while the SC3 sits at 1,000 per hour with AWG38. The dual-view SC3A-DV adds a second view for wider body coverage at 1000 kg.
Use guide
- Confirm floor loading for an 800 kg cabinet before delivery
- Assemble using the three-joint construction and align the sections
- Connect 180-240 V AC at 50 Hz plus or minus 3 Hz
- Run the lane in continuous cyclic mode rather than stopping between subjects
- Export images by USB when a record has to leave the operator station
Where this product is used
Part of Multi-Zone Walk-Through Metal Detectors ยท typically specified for:
ABX-5010-SC3 Full-Body X-Ray Screening System FAQ
What throughput can one lane sustain
At least 1,000 persons per hour, with each scan under 4 seconds.
What is the dose per scan
Under 0.20 uSv per full-body scan, with leakage below 0.19 uSv/h measured at 50 cm.
How long does installation take
The three-joint construction is designed to shorten assembly and alignment. Send your site drawing on WhatsApp and we will advise on the sequence.
What are the power requirements
800 W at 180-240 V AC, 50 Hz plus or minus 3 Hz.
Can images be exported
Yes, up to 1,000,000 pictures are stored and USB transfer is supported.
What floor loading does it need
The system weighs 800 kg over a 2610 x 2300 mm footprint.
What certifications are supplied
Documentation is issued per destination market. Ask on WhatsApp and we will confirm what applies to your project.
Related products
Quotation for the ABX-5010-SC3 Full-Body X-Ray Screening System
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.