Misting Nozzle
PP Misting Nozzle 1
A PP misting nozzle delivers a fine, evenly distributed mist for cooling, humidification, or dust suppression in environments where corrosion resistance and low weight are required. This CNSS PP misting nozzle is designed for low to medium pressure applications in greenhouses, livestock farms, outdoor cooling systems, and industrial misting lines where plastic components are suitable for the duty.
No published specification table exists for this listing. Send the duty and the thread on your header and we will confirm the size, pattern and material by email.
Key Benefits
What This Nozzle Gives You
- Plastic body resists corrosion in humid or chemically exposed environments
- T-shaped design allows connection between two threaded fittings in a straight line
- Low weight reduces stress on mounting brackets and pipework
- No metal parts to corrode or degrade in wet or alkaline conditions
- Simple assembly with no internal components to loosen or fail
- Suitable for low to medium pressure misting systems without high impact wear
Application Scenarios
Where It Is Installed
- Outdoor cooling systems in warehouses or loading bays where mist reduces ambient temperature
- Greenhouse humidification where consistent moisture is needed without metal corrosion
- Livestock barns requiring dust control and temperature regulation in high humidity
- Misting lines in textile or packaging facilities where water droplets must not contaminate materials
- Industrial cooling zones where a light mist is used to reduce surface temperature without water pooling
Who It Is For
Buyers Who Specify It
- Maintenance managers replacing corroded metal nozzles in misting systems
- Farm operators installing or upgrading cooling and humidification systems
- Facility engineers specifying low maintenance nozzles for outdoor or high humidity zones
- OEM builders of misting systems needing lightweight, corrosion-resistant components
- Contractors installing fog or mist systems for commercial or agricultural use
Problems It Solves
What It Fixes on the Line
- Heavy metal nozzles causing stress on mounting brackets or pipework over time
- High maintenance cost from frequent replacement of corroded or degraded nozzles
- Inconsistent mist distribution due to internal wear or clogging in metal bodies
- Difficulty in installing nozzles where weight or material compatibility is a concern
Technical Features
How It Is Built
- T-shaped plastic body with two threaded ends for inline connection
- No internal parts or moving components to wear or fail
- Designed for low to medium pressure misting systems
- Threaded fittings allow direct connection to standard pipe threads
- Smooth internal flow path minimizes risk of clogging
- Lightweight construction reduces load on support structures
Materials
Body Materials and Where Each One Suits
- Black threaded fittings for durability and compatibility with plastic body
Manufacturing Process
How the Part Is Made
- Material selection based on the application environment and fluid type
- Molding of the T-shaped plastic body
- Machining of threaded ends to fit standard pipe threads
- Inspection of thread integrity and body alignment
- Packaging for safe transport
- Final inspection before shipment
Quality Control
What Is Checked Before It Ships
- Every product is tested before it ships
- Quality controlled at material selection, manufacturing, inspection, packaging and transportation
- A 3 month quality guarantee is stated on the product listings
Customization
What Can Be Changed to Suit You
- Standard and non-standard parts can be customised to drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial installations
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| Stainless steel misting nozzle | A stainless steel nozzle lasts longer under high pressure or abrasive water, but is heavier and may corrode in certain chemical environments. PP is lighter and more resistant to moisture and mild chemicals. |
|---|---|
| Brass misting nozzle | Brass is stronger and handles higher pressure, but is prone to corrosion in humid or alkaline conditions. PP avoids corrosion but is not suitable for high pressure or abrasive fluids. |
| Full cone nozzle | A full cone provides a circular mist pattern, which is better for tank filling or gas cooling. The T-shaped PP nozzle is designed for linear, inline misting in ducts or open areas. |
| Hollow cone nozzle | A hollow cone creates a ring of droplets ideal for gas scrubbing, but is not suited for linear misting. The PP misting nozzle delivers a consistent line of mist for surface cooling or humidification. |
Use Guide
Fitting and Running It
- Confirm the operating pressure and fluid type before selecting the nozzle
- Ensure the thread size on the fittings matches the pipe system
- Install the nozzle so the T-body aligns with the flow direction
- Check for blockage if mist distribution becomes uneven
- Replace the nozzle if the plastic body shows signs of cracking or warping
- Use a filter upstream if the water supply contains particulates
Questions Buyers Ask
PP Misting Nozzle 1 Questions
What is the body material of this PP misting nozzle?
This material is suitable for low to medium pressure misting in humid or chemically mild environments.
Can I get a sample before placing a production order?
Yes. Trial samples can be sent free of charge and samples can be ready within 10 days.
Do you accept OEM orders and custom designs?
Yes. Standard and non-standard parts can be customised to your drawing. OEM orders are accepted, including customer marking.
What is the quality guarantee for this nozzle?
A 3 month quality guarantee is stated on the product listings. If a nozzle fails in service, send us a photo and the operating conditions by email for assessment.
What are the payment terms?
The product listings state T/T 100% in advance. Send the model, quantity, and destination port by email and we will confirm the terms for your order.
Is this nozzle suitable for high pressure systems?
This PP misting nozzle is designed for low to medium pressure applications. It is not recommended for high pressure systems where mechanical stress or wear could compromise the plastic body.
How do I ensure the correct thread size?
The thread size is confirmed on enquiry. Please provide the pipe thread standard and size you are using, and we will verify compatibility with this nozzle.
Related Products
Others in the Misting Nozzle
Go Deeper
Industries Guides and Ways to Order
Ask About PP Misting Nozzle 1
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.