Carbide Blades
Carbide Saw Discs
Fine tooth saw discs and slitting discs with ground bore and side faces
Product Detail
Carbide Saw Tips
Tungsten Carbide Saw Tips F1 and U.S. Standard Series
European style F1 series US standard series and specials for metal cutting and band saws
- Two standards one supplier. F1 European style and U.S. standard series come from the same production line.
- Automatic tipping friendly. Dimensional consistency inside a batch supports automatic brazing machines.
- Specials on request. Hollow tip V top Kodiak and other non standard shapes can be quoted.
Product Overview
Overview
Tungsten carbide saw tips for brazing onto circular and band saw bodies. We produce our standard F1 series which is similar to the European style the U.S. standard series and saw tips for metal cutting and band saws. Non standard shapes such as hollow tip V top and Kodiak are available on request.
Application Scenarios
- Circular saw blade tipping for wood and panel
- Metal cutting circular saws
- Carbide tipped band saws
- Saw service and retipping shops
Problems It Solves
- Mixed tip dimensions inside a batch make automatic brazing unreliable
- Saw bodies get scrapped because a tip loses its braze seat
- European and US tooth geometries are usually bought from two different suppliers
Key Benefits
Why Customers Specify This Product
Two standards one supplier
F1 European style and U.S. standard series come from the same production line.
Automatic tipping friendly
Dimensional consistency inside a batch supports automatic brazing machines.
Specials on request
Hollow tip V top Kodiak and other non standard shapes can be quoted.
Metal cutting and band saw types
Tips for metal cutting saws and band saws as well as wood working blades.
Technical Features
Materials
Technical Features
- F1 standard series similar to European style
- U.S. standard series
- Saw tips for metal cutting and band saws
- Non standard shapes including hollow tip V top and Kodiak on request
Material and Grade
Cemented tungsten carbide consisting of tungsten carbide grain in a cobalt binder. Binder content and grain size are chosen against your load case because hardness and toughness move in opposite directions. Our engineers propose a direction and explain the trade off rather than quoting a grade code you cannot verify. See the grade guide.
Specifications
Specification Sheet
| Product form | Carbide saw tip for brazing |
|---|---|
| Standard series | F1 series (European style) and U.S. standard series |
| Special shapes | Hollow tip V top Kodiak and other shapes on request |
| Applications | Wood cutting metal cutting and band saws |
| Material | Cemented tungsten carbide (WC with cobalt binder) |
| Packing | Bulk packing sorted by size |
Dimensions tolerances and grade are confirmed on the approved drawing before production. Figures that are not listed here were not published by the factory and will be confirmed with your enquiry.
How It Is Made
Manufacturing Process and Quality Control
Every part follows the same production route. Critical dimensions are agreed on the drawing so both sides measure the same thing.
1. Powder PreparationBall milling and spray drying to a uniform granulate
2. PressingBlank pressed with machining stock where required
3. Sinter-HIPDensified under isostatic pressure to reduce porosity
4. MachiningGrinding EDM and lapping to the approved drawing
5. InspectionCritical dimensions checked before packing
6. Export PackingProtected packing for air or sea freight
Certifications
Certificate copies and material documentation are supplied on request with your order. We do not publish certificate claims that we cannot show you so ask for exactly what your import or QA process requires and we will confirm what can be provided.
Customization Options
- Dimensions to your drawing
- Grade direction matched to the load case
- Surface condition as sintered ground or lapped
- Part marking on request
- Packing adapted to air or sea freight
Compared With Other Options
- Versus hardened tool steel — far better wear resistance but more brittle so mounting matters
- Versus other carbide in this range — see the related products below for the closest alternative form
- Versus a fabricated assembly — a one piece carbide part removes joints and alignment work
Use Guide
Fitting and Service Guide
- Check the seat is clean and undamaged before fitting. Uneven support is the most common cause of early failure.
- Use even pressure. Never drive a carbide part into a holder by impact.
- Follow the interference fit agreed on the drawing rather than adjusting the carbide.
- Store parts separated and supported. Carbide chips carbide when parts knock together.
- Log the run time achieved so replacement becomes planned maintenance.
Photographs of carbide saw tips and related parts from our own production.
Related Reading
Related Application Case and Guide
Wood and Metal Cutting
Saw tips inserts rods and blades
Read MoreCarbide Sleeve With 176 Holes
A carbide sleeve of OD 268 mm x ID 228.6 mm x H 160 mm carrying 176 holes produced for oil field service equip…
Read MoreTungsten Carbide Grade Guide
How cobalt content and grain size move hardness against toughness and how to describe your application so a su…
Read More
FAQ
Carbide Saw Tips FAQ
What is the difference between the F1 series and the U.S. standard series?
They are two different dimensional standards for saw tips. Our F1 series follows the European style and we also produce the U.S. standard series. Tell us which your saw bodies are built for.
Can you produce a non standard tip shape?
Yes. Shapes such as hollow tip V top and Kodiak are available on request. Send the tip drawing or a sample.
Do you supply tips for band saws?
Yes. Saw tips for metal cutting and band saws are part of our standard range.
Next Step
Request a Quotation for Carbide Saw Tips
Send the drawing quantity and application. If you only have a worn sample send photos with measured dimensions and we will prepare a drawing for your approval.
Send a drawing or a sample photo on WhatsApp or by email. Files are reviewed by our production engineers, not by a form.