Carbide Saw Tips
Carbide Saw Tips
European style F1 series US standard series and specials for metal cutting and band saws
Product Detail
Product Category
Tungsten Carbide Saw Tips for Circular and Band Saws
Tungsten carbide saw tips in our standard F1 series similar to the European style in the U.S. standard series and for metal cutting and band saws with non standard shapes such as hollow tip V top and Kodiak available on request.
Problems It Solves
What Goes Wrong Today
- Mixed tip dimensions inside a batch make automatic brazing unreliable
- Saw bodies get scrapped because a tip loses its braze seat
- European and US tooth geometries are usually bought from two different suppliers
Benefits
What Changes With Carbide
- F1 European style and U.S. standard series come from the same production line
- Dimensional consistency supports automatic tipping machines
- Special shapes such as hollow tip V top and Kodiak can be quoted on request
Types We Produce
Forms in This Category
- F1 series saw tips similar to European style
- U.S. standard series saw tips
- Saw tips for metal cutting and band saws
- Non standard shapes such as hollow tip V top and Kodiak on request
Grades tolerances and dimensions are confirmed against your drawing when you enquire.
Product Photographs
Carbide Saw Tips in Production
These are photographs of parts produced in our own plant. Each caption describes what the picture actually shows.
Related
All Product Categories
Products in This Category
Application Scenarios
Industries That Use This Category
Keep Reading
Related Cases and Guides
Carbide Strips up to 1800 mm
Carbide strip production where the standard length is 330 mm and the maximum length produced in one piece is 1…
Read MoreTungsten Carbide Grade Guide
How cobalt content and grain size move hardness against toughness and how to describe your application so a su…
Read MoreSinter-HIP Process Guide
The production route from WC powder through ball milling spray drying pressing Sinter-HIP and machining and wh…
Read More
FAQ
Carbide Saw Tips FAQ
Which industries buy carbide saw tips from you?
Mainly Wood and Metal Cutting, Paper Printing and Packaging. Tell us your application and we will confirm what suits it.
Can you produce carbide saw tips to our drawing?
Yes. Custom made carbide parts to drawing are a normal part of our production. Send the drawing or a measured sample and we will confirm what is manufacturable in carbide.
What material are these parts made from?
Cemented tungsten carbide which is tungsten carbide grain in a cobalt binder. The grade direction is chosen with our engineers against your load case rather than sold as one universal grade.
How are the parts densified?
Blanks are densified by Sinter-HIP which applies isostatic gas pressure during the sintering cycle so residual porosity is reduced before machining.
What do you need in order to quote?
The drawing or a sketch with measured dimensions the quantity and a short description of the application. Send it on WhatsApp to +86 187 7492 5813 or by email to [email protected].
Next Step
Get a Quotation for Carbide Saw Tips
Send the drawing the quantity and a short note about the application. Our engineers reply with a specification you can check before ordering.
Send a drawing or a sample photo on WhatsApp or by email. Files are reviewed by our production engineers, not by a form.