Carbide Buttons
Carbide Buttons
Conical spherical and ballistic buttons for rock bits DTH bits and coal picks
Product Detail
Industry Application
Tungsten Carbide for Mining and Rock Drilling
Carbide buttons for rock roller bits and down the hole bits water well drilling coal pick tips cutter picks and cross bits for tunnel making cap tips for grading and carbide crushing and milling tools.
Industry Pain Points
What Fails in This Sector
- Button loss underground means a bit trip and lost drilling hours
- Blunt inserts raise feed pressure and shorten the life of the bit body
- Mixed insert quality inside one bit produces uneven wear across the face
- Ground conditions change and one universal grade does not cover them
Customer Needs
What Buyers Actually Need
- Grades matched to abrasive dominated or impact dominated rock
- Dimensional consistency so buttons stay interchangeable in the bit body
- A supplier who can cover buttons picks and crushing tools together
- Batch quantities produced to the same specification each time
Related
All Product Categories
Recommended Products for Mining and Drilling
Typical Applications
Where the Parts Are Used
- Rock roller bits and DTH button bits
- Water well drilling
- Coal picks cutter picks and cross bits for tunnelling
- Cap carbide tips for grading and carbide crushing tools
Delivery Capability
What We Can Deliver
- Conical spherical and ballistic button profiles
- Ground cylindrical bodies for interference fit
- Carbide milling bits and crushing tools
- Grade selection discussed before the order is confirmed
Solution Flow
Solution Route for Mining and Drilling
1. Requirement ReviewDrawing sample or failure photos reviewed by an engineer
2. Grade DirectionAbrasion or impact dominated load case discussed with you
3. Drawing ApprovalGeometry and critical dimensions agreed in writing
4. ProductionPressing Sinter-HIP and machining to the approved drawing
5. InspectionCritical dimensions checked before packing
6. Export DeliveryProtected packing and documents for your clearance
Related Reading
Cases and Knowledge for This Industry
Carbide Sleeve With 176 Holes
A carbide sleeve of OD 268 mm x ID 228.6 mm x H 160 mm carrying 176 holes produced for oil field service equip…
Read MoreTungsten Carbide Grade Guide
How cobalt content and grain size move hardness against toughness and how to describe your application so a su…
Read MoreCarbide Part Handling and Maintenance
Practical handling storage fitting and inspection advice that prevents avoidable damage to carbide wear parts …
Read MoreCarbide Compared With Tool Steel
Where cemented carbide is worth the extra cost against hardened tool steel and where a steel part remains the …
Read More
FAQ
Mining and Drilling FAQ
Which carbide products do you recommend for mining and drilling?
Mainly Carbide Buttons, Carbide Pins and Studs, Solid Carbide Rods. The right one depends on the geometry and the failure mode so send a drawing or photos of the worn part.
Can you match a part we currently buy elsewhere?
Yes if you send the drawing or a measured sample. We prepare a drawing for your approval before production and we do not copy from photographs alone.
What information helps you quote quickly for this sector?
The drawing the quantity the operating conditions and how the current part fails. Send it on WhatsApp to +86 187 7492 5813 or by email to [email protected].
Do you supply sample quantities first?
For critical applications a sample run before the production order is the honest way to confirm both the grade and the geometry. Ask for it when you enquire.
Next Step
Get a Carbide Solution for Mining and Drilling
Send the drawing or photos of the worn part with measured dimensions. Our engineers reply with a direction you can evaluate.
Send a drawing or a sample photo on WhatsApp or by email. Files are reviewed by our production engineers, not by a form.