Carbide Buttons
Carbide Buttons
Conical spherical and ballistic buttons for rock bits DTH bits and coal picks
Product Detail
Product Category
Tungsten Carbide Buttons for Mining and Drilling
Tungsten carbide buttons for mining applications including rock roller bits down the hole button bits water well drilling coal picks and cutter picks.
Problems It Solves
What Goes Wrong Today
- Button loss underground means a bit trip and lost drilling hours
- Blunt buttons increase feed pressure and shorten bit body life
- Mixed button quality inside one bit gives uneven wear across the face
Benefits
What Changes With Carbide
- Grades can be matched to abrasive or impact dominated ground conditions
- Consistent press and sinter route keeps buttons dimensionally interchangeable
- Conical spherical and ballistic profiles from the same supplier
Types We Produce
Forms in This Category
- Conical buttons
- Spherical and ballistic buttons
- Coal pick and cutter pick tips
Grades tolerances and dimensions are confirmed against your drawing when you enquire.
Product Photographs
Carbide Buttons in Production
These are photographs of parts produced in our own plant. Each caption describes what the picture actually shows.
Related
All Product Categories
Products in This Category
Application Scenarios
Industries That Use This Category
Keep Reading
Related Cases and Guides
Carbide Sleeve With 176 Holes
A carbide sleeve of OD 268 mm x ID 228.6 mm x H 160 mm carrying 176 holes produced for oil field service equip…
Read MoreTungsten Carbide Grade Guide
How cobalt content and grain size move hardness against toughness and how to describe your application so a su…
Read MoreSinter-HIP Process Guide
The production route from WC powder through ball milling spray drying pressing Sinter-HIP and machining and wh…
Read More
FAQ
Carbide Buttons FAQ
Which industries buy carbide buttons from you?
Mainly Mining and Drilling. Tell us your application and we will confirm what suits it.
Can you produce carbide buttons to our drawing?
Yes. Custom made carbide parts to drawing are a normal part of our production. Send the drawing or a measured sample and we will confirm what is manufacturable in carbide.
What material are these parts made from?
Cemented tungsten carbide which is tungsten carbide grain in a cobalt binder. The grade direction is chosen with our engineers against your load case rather than sold as one universal grade.
How are the parts densified?
Blanks are densified by Sinter-HIP which applies isostatic gas pressure during the sintering cycle so residual porosity is reduced before machining.
What do you need in order to quote?
The drawing or a sketch with measured dimensions the quantity and a short description of the application. Send it on WhatsApp to +86 187 7492 5813 or by email to [email protected].
Next Step
Get a Quotation for Carbide Buttons
Send the drawing the quantity and a short note about the application. Our engineers reply with a specification you can check before ordering.
Send a drawing or a sample photo on WhatsApp or by email. Files are reviewed by our production engineers, not by a form.