Inclinometer Casings
Optional Parts For Inclinometer Casings
Top and bottom caps and outer protection boxes for inclinometer casings. These are the parts that keep a monitoring hole usable between surveys: caps stop fill, water and debris entering the casing, and the protection box shields the casing head where it is exposed to site traffic.
ISO 9001:2015 production Samples available Small orders accepted
Product Overview
Top and bottom caps and outer protection boxes for inclinometer casings. These are the parts that keep a monitoring hole usable between surveys: caps stop fill, water and debris entering the casing, and the protection box shields the casing head where it is exposed to site traffic.
Materials
- Supplied to match the casing material ordered
Key Benefits
- Keeps debris and surface water out of the casing between survey visits
- Protects the casing head where plant and traffic pass nearby
- Supplied to match our OD 70 mm casing range
- Ordered on the same line as the casing so nothing is missing at installation
Application Scenarios And Who It Is For
Application Scenarios
- Capping the bottom of a casing string before installation
- Sealing the casing head between monitoring surveys
- Protecting exposed casing heads on active construction sites
- Long-term monitoring holes left in place after handover
Who It Is For
- Monitoring contractors maintaining survey holes
- Drilling contractors completing instrumentation installations
- Site teams protecting instrumentation during construction
- Consultants specifying complete casing installations
Problems It Solves
- Casing that fills with debris and cannot be surveyed on the next visit
- Damaged casing heads where plant works near a monitoring hole
- Holes abandoned because the head was destroyed during earthworks
- Chasing small parts separately after the casing has arrived
Technical Features
- Top and bottom caps for inclinometer casings
- Outer protection boxes for inclinometer casings
- Supplied to match the casing diameters we produce
Specifications
Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.
| Parts | Top caps, bottom caps, outer protection boxes |
|---|---|
| Matched Casing | Our inclinometer casing range including OD 70 mm |
Quality Control
- Fit checked against the casing diameter ordered
- Caps checked for a secure seal on the casing end
- Protection boxes checked for dimensional fit at the casing head
Customization Options
- Cap and box selection to match casing diameter
- Supply together with a casing order
Comparison With Other Products
| Compared With | Why This Product |
|---|---|
| Improvised site caps | Matched caps seal on the casing end instead of being taped over and lost |
| No head protection | A protection box is much cheaper than redrilling a monitoring hole damaged by site plant |
Use Guide
- Fit the bottom cap before lowering the casing string
- Seal the top cap after each survey
- Install the protection box where the casing head is exposed
- Record the head level and orientation for future surveys
Questions Buyers Ask
Optional Parts For Inclinometer Casings FAQ
What parts are included in this range
Top and bottom caps for inclinometer casings, and outer protection boxes for the casing head.
Do they fit OD 70 mm casing
Yes, they are supplied to match our casing range including the standard OD 70 mm casing.
Can they be ordered with the casing
Yes, and that is the usual way, so nothing is missing when the drilling team arrives.
Do you have caps for OD 53 and 80 mm pipes
Tell us the diameters on your order and we will confirm the matching parts on WhatsApp.
Why is a protection box needed
It shields the casing head from site plant and traffic so the hole stays surveyable through the construction period.
What is the minimum order quantity
Small order quantities are available, and these parts are normally shipped together with casing.
Related
Related Products And Pages
Settlement Magnet Ring
The AT-88 series settlement magnet ring is the target component in a settlement measurement system. The housing is injection...
View Specifications
Piezometer Casing Pipes
GT-PC series PVC piezometer casing is supplied in OD 53 mm, 70 mm and 80 mm, in 2 m or 4 m lengths, with wall thickness deviation...
View Specifications
Standard Aluminum Inclinometer Casing
GT-AL-00 is the standard OD 70 mm aluminium inclinometer casing, built to the same groove and straightness specification as our ABS...
View Specifications
Standard PVC Inclinometer Casing
GT-PVC-00 is the standard OD 70 mm PVC inclinometer casing, dimensionally matched to our ABS casing so the same probes and...
View SpecificationsAsk About Optional Parts For Inclinometer Casings
Send the model, quantity and destination port and we will reply with a quotation, packing detail and lead time.