Copper Electrolysis Refining Machines
These machines use the principle of electrolysis to refine crude copper of 60-80% purity to 99.9-99.99% purity copper. Gold, silver, palladium and platinum in the feed remain in the anode mud and are separated afterwards.
Every Machine In The Copper Refining Range
Small Copper Electrolysis Refining Machine 2kg Per 24h
Rotating cathode copper cell that also drops gold silver palladium and platinum into the anode mud
View machine
Copper Electrolysis Refining Machine For 80 Percent Copper To 99.9 Percent
Basket or plate anode cell at 3KG and 50KG per 24 hours with high frequency pulse rectifier
View machineWhat This Category Is For
Impure copper carrying precious metals is usually sold as one mixed lot at copper price. Refining copper without capturing the anode mud throws away the most valuable part of the feed.
Who It Suits
- Copper recyclers upgrading alloy scrap
- E-waste processors with copper bearing residues
- Refiners running combined copper and precious metal lines
- Laboratories and pilot plants
Why These Machines
- Copper output at 99.9% or 99.99%
- Gold, silver, palladium and platinum concentrated in the anode mud
- 2kg/24h bench machine on 220V and 3KG or 50KG/24H machines on a 1000A/12V pulse rectifier
- Low-voltage high-current technology to reduce power consumption
- Modular construction with timing, temperature and high current alarms
Where These Machines Are Used
- Refining 60% purity copper to 99.9-99.99% copper
- Separating gold, silver, palladium and platinum into the anode mud
- Refining 80% copper alloy to 99.9-99.99% copper
- Separating copper from insoluble metals retained in the anode bag
Copper Refining In The Factory And On Site
How These Machines Are Configured
Questions About Copper Refining
What copper purity does it accept?
60% purity copper, either cast into plates or loaded as copper slag into the titanium basket.
What happens to gold, silver, palladium and platinum in the feed?
They remain in the anode mud, which is cleaned and then reduced and oxidised in a medium frequency furnace to give precious metal alloy blocks.
What input copper does it need?
Copper alloy with a copper content greater than 80%.
What capacities are offered?
3KG/24H and 50KG/24H.
Talk To Us About Copper Refining
Tell us the metal, the solution and the daily volume and we will quote the right model.