Anti-Glare LED Spotlights Built for Commercial Ceilings
Jiangmen YiYo Lighting designs and manufactures recessed spotlights, downlights, grille lights and track lights for retail, hospitality and workplace projects. 70 catalogue models, one consistent optical family.
Beam Angles From 5 to 60 Degrees on One Aperture Platform
Choose the reflector finish and beam angle per room, keep the ceiling cutout the same. Our spotlight families share cutout sizes from 35 mm to 95 mm so designers can mix accent and general light without redrawing the ceiling.
A 3000 Square Metre Factory Behind Your Own Lighting Brand
We are the original manufacturer of our own designs and we run ODM and OEM programmes for lighting brands. Die casting, assembly and photometric testing happen in the same building in Jiangmen, Guangdong.
A Lighting Factory That Solves Ceiling Problems Not Just Supplies Fittings
A lighting factory since 2009 with its own die-casting workshop and an in-house lighting laboratory, so optics, finish and fit are controlled under one roof.
What We Make
Recessed anti-glare spotlights, downlights, multi-head grille lights and track spotlights, built around COB and SMD light engines in die-cast aluminium bodies.
Who We Serve
Lighting brands, project contractors and distributors fitting out retail chains, hotels, shopping malls, offices, supermarkets, hospitals, schools and high-end homes.
What We Solve
Glare, patchy ceilings and mismatched apertures. Our reflectors, beam angles and cutout sizes are engineered as families so a whole ceiling plan reads as one system.
Four Product Families One Aperture Logic
Spotlights, grille lights, downlights and track heads that share cutout sizes, reflector finishes and beam options, so a whole building can be specified from one catalogue.
Models From Across the Range
Sixteen of the 70 catalogue models. Every product page carries the published power, beam angles, body size and ceiling cutout.
The Four Things That Go Wrong on a Commercial Ceiling
Glare, patchy ceilings and mismatched apertures. Our reflectors, beam angles and cutout sizes are engineered as families so a whole ceiling plan reads as one system.
Glare That Ruins A Finished Ceiling
Shallow fittings put the diode close to the aperture and the room ends up with bright spots in every sightline. Our spotlights recess the light source deep inside a matt or gun-black reflector so the aperture reads dark until you stand under it.
Apertures That Do Not Match Between Rooms
Different suppliers mean different cutouts, so the plasterboard contractor cuts three hole sizes for one floor. Our families step through fixed cutouts - 35, 45, 55, 65, 75 and 95 mm - across spotlights, grille lights and downlights.
One Beam Angle For Every Application
A 60 degree flood washes a corridor but cannot pick out a product on a shelf. Most models are available in 15, 24, 36 or 38 and 50 or 60 degrees, and selected S1 heads go down to 5, 8 and 10 degrees for high ceilings.
Colour And Finish Drift Between Batches
Body colour, reflector coating and trim finish are specified per order and produced in our own die-casting and finishing lines, so a repeat order for a chain rollout matches the first store.
Industries We Supply
Lighting brands, project contractors and distributors fitting out retail chains, hotels, shopping malls, offices, supermarkets, hospitals, schools and high-end homes.
What Being The Manufacturer Actually Changes
Manufacturer Not Trader
YiYo Lighting is the original manufacturer of its own designed products. The tooling, the die-cast housings and the assembly are ours.
Own Die Casting Workshop
Housings are cast in house, which keeps heat-sink geometry, wall thickness and finish under our control instead of a subcontractor's.
Standard Lighting Laboratory
Products go through complete system experiments in our own lighting laboratory covering function, anti-glare performance and light effect control.
Optical Partnerships
We work closely with specialist optical suppliers so beam angles hold their stated spread and the light output stays comfortable at the design distance.
ODM And OEM Programmes
We have run ODM and OEM business for established lighting companies and can produce under your brand, your carton and your colour scheme.
Fifteen Years On One Category
Since 2009 the company has concentrated on commercial lighting research and production rather than spreading across unrelated product lines.
Casting Assembly and Testing Under One Roof
Photographs from the Jiangmen facility: the ageing rack, the lighting laboratory and the showroom where the current catalogue is displayed.
How We Work With Lighting Brands and Contractors
Lighting Guides Worth Reading Before You Specify
Questions Buyers Ask Us First
What does YiYo Lighting manufacture?
Commercial LED lighting: recessed anti-glare spotlights, downlights, multi-head grille lights and track spotlights. There are 70 models in the current catalogue across four product families.
Where is the factory?
In Hetang Town, Pengjiang District, Jiangmen City, Guangdong, China. The facility covers 3000 m² and contains the die-casting workshop, assembly and the company's own lighting laboratory.
How long has the company been trading?
YiYo Lighting Co., Ltd was established in 2009 and has focused on commercial lighting research and production since then.
Do you accept OEM and ODM orders?
Yes. We are the original manufacturer of our own designed products and have run ODM and OEM programmes for established lighting companies.
What beam angles are available?
Across the catalogue, 5°, 8°, 10°, 15°, 24°, 36°, 38°, 40°, 50°, 55° and 60° depending on the model. The angle is fixed per order line.
How do I get a quotation?
Send the model references, beam angles, finishes and quantities to Jenny by WhatsApp or email. Include the ceiling height and the application if you would like us to recommend models.
Tell Us The Ceiling Height and We Will Tell You The Model
Send the application, the aperture you want and the quantity. Jenny will come back with the models that fit and a quotation.