- Home
- Products
- Indoor WPC Wall Panel
- WPC Wall Panel Interior WW-IN19612
WPC Wall Panel Interior WW-IN19612
WW-IN19612 interior WPC wall panel, 196mm wide, 2900mm long, 12mm and 20mm thick, side slotted and laminated. Waterproof flame retardant fluted wall panels.
Product Overview
WW-IN19612 is the wide module interior panel: 196mm across, 2900mm long, in 12mm and 20mm thicknesses or customized. It is laminated and hot and cold pressed with side slotting, so panels lock edge to edge and the joint disappears into the flute pattern. The wider module covers wall area with fewer pieces, which pulls installation hours down on large lobby and corridor walls.
Key Benefits
- 196mm module covers more wall per panel and cuts installation time
- 12mm and 20mm thicknesses for a flatter or deeper wall relief
- Side slotting lets panels interlock so joints stay tight and aligned
- Lamination with hot and cold pressing gives an even veneer surface
- Waterproof and flame retardant performance for commercial interiors
At A Glance
- Family
- Wall Panels
- Category
- Indoor WPC Wall Panel
- Type
- WPC Wall Panel Interior WW-IN19612
- Length
- 2900mm or customized
- Width
- 196mm or customized
- Thickness
- 12mm, 20mm or customized
The Profile The Surface And The Finish Options
These are the manufacturer's own photographs of this product, reproduced as published: the section, the surface finish and the colour options that were photographed together. Nothing here is a rendering.
Who It Is For
- Contractors covering large interior wall areas who need fewer panels, faster setting out and a clean interlocking joint.
Problems It Solves
- Narrow panels multiplying the number of joints and the labour hours on big walls
- Butt joints that open and show a shadow line where panels meet
- Veneer surfaces that lift at the edges after pressing
- Interior panelling that cannot be used in damp commercial areas
Application Scenarios
- Hotel lobbies and large feature walls
- Office reception areas
- Commercial corridors
- Living rooms and TV walls
- Showroom and exhibition interiors
Technical Features
- Type: WPC Wall Panel Interior WW-IN19612.
- Length: 2900mm or customized.
- Width: 196mm or customized.
- Thickness: 12mm, 20mm or customized.
- Material: Wood plastic composite.
- Process: Lamination surface, hot and cold pressing, side slotting.
- Performance: Waterproof, flame retardant.
Published Specification
Every row below is reproduced from the manufacturer's published specification for this range. Rows shown in italics are figures the specification does not publish; those are confirmed in writing rather than estimated here.
| Type | WPC Wall Panel Interior WW-IN19612 |
| Length | 2900mm or customized |
| Width | 196mm or customized |
| Thickness | 12mm, 20mm or customized |
| Material | Wood plastic composite |
| Process | Lamination surface, hot and cold pressing, side slotting |
| Performance | Waterproof, flame retardant |
Use Guide
- Set out from a plumb starting line, engage the side slot on each successive panel, and fix back to the wall or battens.
- Finish ends with matching trims.
Quality Control
- Side slot profile gauged so panels interlock without gapping
- Lamination adhesion checked after hot and cold pressing
- Width and thickness verified against the 196mm and 12 or 20mm spec
- Surface checked for bubbles, lifted edges and colour drift
Materials
- Wood plastic composite body in the 196mm wide section.
- Laminated veneer surface bonded by hot and cold pressing.
- Side slotted edges so panels interlock.
Manufacturing Process
- ['Extrusion', 'A section that drifts mid-run turns into cutting waste and joints that will not close on site.', 'The wood flour and polymer compound is extruded through the profile die and pulled to the published section.']
- ['Hot and cold pressing', 'A veneer that lifts at the edge shows up months after the wall is handed over.', 'The decor veneer is laminated to the panel face and bonded under hot then cold pressing.']
- ['Side slotting', 'Butt joints open and show a shadow line; a slotted edge holds the run in line.', 'The panel edges are machined with the interlocking side slot after pressing.']
- ['Inspection', 'A dimension checked after packing is a dimension checked too late.', 'Section, colour and surface are checked against the order spec during the run, not only at the end.']
- ['Packing and loading', 'Edge damage in transit is the most common reason a panel order is rejected on arrival.', 'Boards are bundled, film wrapped or cartoned and palletised for container loading.']
Certification Standards
Production follows . Certificates are sent per product on request rather than posted publicly, because the documents a shipment needs depend on the destination market.
Customisation Options
- 12mm or 20mm thickness, or a specified depth
- Width and length cut to your wall module
- Veneer colour and texture selection
- OEM packaging and project samples
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.
| Against the alternative material | Against the 160mm panels, WW-IN19612 covers wall area faster with fewer joints and reads as a broader flute. Against the 195mm WW-IN19515, this one runs thinner at 12mm for a flatter wall. |
| Against a panel sold without a published section | This product publishes 196mm or customized. A supplier quoting a range name and a photograph is asking you to discover the section after the container arrives, which is where cutting waste and joints that will not close come from. |
| Against a quotation that does not state the material | The blend here is published as Wood plastic composite. Two quotations cannot be compared until both state what is actually in the board. |
| Against the rest of this range | See the Indoor WPC Wall Panel page for what this range does that the others do not, and the related products below for the nearest alternatives. |
WPC Wall Panel Interior WW-IN19612 Questions
What is the panel width?
Which thicknesses are available?
How do the panels join?
What surface process do you use?
Is it waterproof?
Can you cut it to a shorter length for shipping?
Products Buyers Shortlist Alongside This One
WPC Wall Panel Interior WW-IN16023
WW-IN16023 interior WPC wall panel, 160mm wide, 15mm deep, 2900mm long with a smooth wood veneer finish. Fluted wall panels for homes offices hotels and malls.
See the specification
WPC Wall Panel Interior WW-IN16015
WW-IN16015 interior WPC wall panel, 160mm wide, 2900mm long, 10mm 15mm and 23mm thicknesses with a smooth wood veneer finish for homes offices and hotels.
See the specification
WPC Wall Panel Interior WW-IN19515
WW-IN19515 interior WPC wall panel, 195mm wide, 2900mm long, 15mm and 23mm thick with laminated veneer and side slotting. Waterproof flame retardant wall panels.
See the specificationGuides That Cover This Product
Where It Has Been Installed
Request WPC Wall Panel Interior WW-IN19612
Send the finished size, the quantity, the mounting and the destination market. A quotation and the full specification come back by email.