PB-300 Series Ribbon-Band Jewellery Box
Dark rigid boxes finished with a contrast ribbon band across the lid
The photograph shows four boxes in graphite and near-black, each crossed by a narrow woven band in a lighter tone, with a long bracelet box opened to show the velour bed.
How it is built
Cardboard and paper construction with a foam insert covered in velour. The band is applied across the lid, so the same carcass can be re-badged for a second collection by changing ribbon colour alone.
Who it suits
Brands running two or three seasonal lines off one box tooling, where the ribbon does the differentiating.
Everything on this page comes from the factory’s own catalogue entry for this product (old-site reference: product 127) and from its own photograph. Where the factory published no figure, none is shown.
Specification
| Material | Cardboard; Paper; Foam insert covered velour |
|---|---|
| Service | Made to your requirement to your requirement |
| Service | The covered paper and insert velour colour can be different to your requirement |
| Sizes | Made to your requirement |
| Family | Jewellery Boxes |
| Construction | Rigid card & paper |
| Old-site reference | Product 127 |
MOQ, sampling time and lead time are quoted per project — they were never published, so they are not stated here.
Rigid Card & Paper Boxes
Cardboard carcass, paper or coated-paper wrap, foam insert covered in velour or satin — the construction behind most of the PB series and the confectionery packs.
How this construction works →Made to your specification
Size, covering paper, insert material and insert colour are set on the order. Send the piece that goes in and the box is quoted around it.
What we need from you →Catalogue & RFQ checklist
The full 53-product catalogue as a PDF, plus a one-page checklist of everything a gift-box quotation needs.
Download →About the PB-300 Series Ribbon-Band Jewellery Box
What size is the PB-300 Series Ribbon-Band Jewellery Box?
This one is made to your requirement rather than drawn from a published table, which is why no millimetre figure appears above. Send the dimensions of the piece that goes inside, or the piece itself, and the box is quoted around it.
What is the PB-300 Series Ribbon-Band Jewellery Box made from?
Cardboard; Paper; Foam insert covered velour Cardboard and paper construction with a foam insert covered in velour. The band is applied across the lid, so the same carcass can be re-badged for a second collection by changing ribbon colour alone.
Can we get a sample of the PB-300 Series Ribbon-Band Jewellery Box before ordering?
Ask for one with your enquiry. Sampling time was never published on the old site, so it is quoted per project — but a physical sample of the PB-300 Series Ribbon-Band Jewellery Box against your own product is always faster than a further round of drawings.
Related in jewellery boxes
WB-600 Series Lacquered Wood Box
Five-size lacquered wood range lined in PU leather
View product →
WB-200 Series Gloss Cherry Wood Box
Six-size high-gloss cherry range lined in crème velvet
View product →
WB-300 Series Rosewood-Finish Box
Six-size rosewood-toned range with crème velour interiors
View product →
CB-1 Two-Bottle Wine Gift Box
Burgundy two-bottle presentation box with a satin bow and straw filler
View product →Worth reading before you specify
Rigid box or folding carton: which one your jewellery line needs
The two constructions look similar in a photograph and behave completely differently in the hand, on the shelf and on the freight invoice.
Read the guide →Velour, satin, foam and PU: choosing what goes inside the box
The insert is the part the customer touches and the part that decides whether the piece is presented or just contained.
Read the guide →Quote the PB-300 Series Ribbon-Band Jewellery Box
Give us the quantity, the size you need and the covering and insert colours. If you are matching an existing box, send a photograph of it with a ruler in shot.