WB-600 Series Lacquered Wood Box
Five-size lacquered wood range lined in PU leather
The photograph shows a pale honey-lacquered box opened to a white interior, with a second box behind it and a watch cushion visible in the open lid.
How it is built
Wooden carcass with a PU leather lining. Published sizes run from a 50 x 50 x 45 mm ring box up to a 168 x 170 x 30 mm flat tray, with a 232 x 62 x 30 mm strap box in between.
Who it suits
Retailers who want a light-toned wood box rather than the usual dark rosewood, and need the sizes to already exist.
Everything on this page comes from the factory’s own catalogue entry for this product (old-site reference: product 115) and from its own photograph. Where the factory published no figure, none is shown.
Specification
| Material | Wooden; PU leather |
|---|---|
| Sizes |
|
| Service | OEM service available |
| Family | Jewellery Boxes |
| Construction | Lacquered wood |
| Old-site reference | Product 115 |
MOQ, sampling time and lead time are quoted per project — they were never published, so they are not stated here.
Lacquered Wooden Boxes
Wooden carcasses in gloss cherry, rosewood, navy, amber and burl inlay, lined in velvet, velour or PU leather — the only part of the range with published size tables.
How this construction works →Made to your specification
Size, covering paper, insert material and insert colour are set on the order. Send the piece that goes in and the box is quoted around it.
What we need from you →Catalogue & RFQ checklist
The full 53-product catalogue as a PDF, plus a one-page checklist of everything a gift-box quotation needs.
Download →About the WB-600 Series Lacquered Wood Box
What sizes does the WB-600 Series Lacquered Wood Box come in?
The factory publishes 5 sizes for this range: WB-601 at 50 × 50 × 45 mm; WB-602 at 82 × 70 × 40 mm; WB-603 at 92 × 98 × 40 mm; WB-604 at 232 × 62 × 30 mm; WB-605 at 168 × 170 × 30 mm. Those are reproduced here exactly as published. If none of them fits your piece, say so — the covering and the fitment can be quoted around a different size.
What is the WB-600 Series Lacquered Wood Box made from?
Wooden; PU leather Wooden carcass with a PU leather lining. Published sizes run from a 50 x 50 x 45 mm ring box up to a 168 x 170 x 30 mm flat tray, with a 232 x 62 x 30 mm strap box in between.
Can you foil or print our logo on the WB-600 Series Lacquered Wood Box?
Send the artwork and we will quote it against this box. As a rule the plainest surface on a pack takes a stamp best, so on the WB-600 Series Lacquered Wood Box we would put the mark on the largest uninterrupted panel rather than over an existing band, print or edge detail.
Related in jewellery boxes
WB-200 Series Gloss Cherry Wood Box
Six-size high-gloss cherry range lined in crème velvet
View product →
WB-300 Series Rosewood-Finish Box
Six-size rosewood-toned range with crème velour interiors
View product →
WB-700 Series Navy Lacquer Wood Box
Four-size navy lacquer range lined in white PU leather
View product →
WH-100 Wooden Watch Box
Black wooden watch box with a crème interior and ring rolls
View product →Worth reading before you specify
Rigid box or folding carton: which one your jewellery line needs
The two constructions look similar in a photograph and behave completely differently in the hand, on the shelf and on the freight invoice.
Read the guide →Velour, satin, foam and PU: choosing what goes inside the box
The insert is the part the customer touches and the part that decides whether the piece is presented or just contained.
Read the guide →Quote the WB-600 Series Lacquered Wood Box
Give us the quantity, the size you need and the covering and insert colours. If you are matching an existing box, send a photograph of it with a ruler in shot.