PB-100 Series Rigid Jewellery Box Set
Five-size charcoal rigid set with white velour foam inserts
The set photographs as five matched charcoal boxes — a small ring cube, two hinged flap boxes for pendant and bangle, a long strap box and a flat necklace tray. Each lid carries the same fine-grain textured paper so a full counter reads as one family.
How it is built
Cardboard carcass wrapped in textured paper, with a foam insert covered in white velour. The pale insert is what lifts a polished metal piece out of a dark box under retail lighting.
Who it suits
Jewellers who buy one box family and need every piece in the window to match — ring, pendant, bangle, chain and a flat tray for sets.
Everything on this page comes from the factory’s own catalogue entry for this product (old-site reference: product 126) and from its own photograph. Where the factory published no figure, none is shown.
Specification
| Material | Cardboard; Paper; Foam insert covered white velour |
|---|---|
| Sizes |
|
| Service | OEM service available |
| Family | Jewellery Boxes |
| Construction | Rigid card & paper |
| Old-site reference | Product 126 |
MOQ, sampling time and lead time are quoted per project — they were never published, so they are not stated here.
Rigid Card & Paper Boxes
Cardboard carcass, paper or coated-paper wrap, foam insert covered in velour or satin — the construction behind most of the PB series and the confectionery packs.
How this construction works →Made to your specification
Size, covering paper, insert material and insert colour are set on the order. Send the piece that goes in and the box is quoted around it.
What we need from you →Catalogue & RFQ checklist
The full 53-product catalogue as a PDF, plus a one-page checklist of everything a gift-box quotation needs.
Download →About the PB-100 Series Rigid Jewellery Box Set
What sizes does the PB-100 Series Rigid Jewellery Box Set come in?
The factory publishes 5 sizes for this range: PB-101 at 55 × 55 × 38 mm; PB-102 at 220 × 55 × 32 mm; PB-103 at 92 × 92 × 33 mm; PB-104 at 92 × 92 × 33 mm; PB-105 at 155 × 158 × 32 mm. Those are reproduced here exactly as published. If none of them fits your piece, say so — the covering and the fitment can be quoted around a different size.
What is the PB-100 Series Rigid Jewellery Box Set made from?
Cardboard; Paper; Foam insert covered white velour Cardboard carcass wrapped in textured paper, with a foam insert covered in white velour. The pale insert is what lifts a polished metal piece out of a dark box under retail lighting.
What is the minimum order quantity on the PB-100 Series Rigid Jewellery Box Set?
Not published. Teng Fei quotes MOQ per project rather than listing it, and it will depend on whether the PB-100 Series Rigid Jewellery Box Set is run to a published size or made to yours. Ask for it in writing with your enquiry and it comes back alongside the price.
Related in jewellery boxes
WB-600 Series Lacquered Wood Box
Five-size lacquered wood range lined in PU leather
View product →
WB-200 Series Gloss Cherry Wood Box
Six-size high-gloss cherry range lined in crème velvet
View product →
WB-300 Series Rosewood-Finish Box
Six-size rosewood-toned range with crème velour interiors
View product →
CB-1 Two-Bottle Wine Gift Box
Burgundy two-bottle presentation box with a satin bow and straw filler
View product →Worth reading before you specify
Rigid box or folding carton: which one your jewellery line needs
The two constructions look similar in a photograph and behave completely differently in the hand, on the shelf and on the freight invoice.
Read the guide →Velour, satin, foam and PU: choosing what goes inside the box
The insert is the part the customer touches and the part that decides whether the piece is presented or just contained.
Read the guide →Quote the PB-100 Series Rigid Jewellery Box Set
Give us the quantity, the size you need and the covering and insert colours. If you are matching an existing box, send a photograph of it with a ruler in shot.