7 Inch Low Version Remote Control LED Search Light 50W SLL-CH015-50W
The SLL-CH015-50W is a 7 inch low-profile remote control LED search light designed for machines that need long-range visibility in dark or hazardous environments. Ten 5W high-intensity LEDs deliver 4000 effective lumens in a 30 degree spot beam, illuminating distant obstacles on cranes, excavators, and mining machinery without the need for a separate spotlight. The die-cast aluminium housing and PC lens are rated IP65, making the light resistant to dust and water spray during operation and cleaning. The remote control allows operation from a safe distance, reducing the need for personnel to approach moving or elevated equipment.
- 30 degree spot beam concentrates light up to 300 meters, improving visibility on long-range tasks
- Remote control enables safe operation from outside the cab or near moving parts
- IP65 sealing resists dust and water spray during daily washdowns and outdoor use
- Ten 5W high-intensity LEDs provide 4000 effective lumens with a 6000K colour temperature for clear, daylight-like visibility
- Die-cast aluminium housing dissipates heat efficiently, supporting a lifetime of more than 30000 hours
Where This Lamp Is Used
- Long-range illumination on cranes and excavators during night construction or maintenance
- Remote operation of search lights on mining machinery where operators must stay clear of moving booms
- Emergency lighting on service trucks and utility vehicles responding to roadside incidents
- Nighttime inspection of large machinery or storage yards where a fixed spotlight is impractical
- Auxiliary lighting on boats and vessels where vibration and moisture are constant challenges
Who It Is For
- Machinery OEMs integrating remote-controlled search lights into new machine designs
- Fleet operators needing long-range lighting for night work on cranes and loaders
- Distributors selling remote control search lights to 4x4 accessory brands and equipment dealers
- Equipment dealers fitting search lights on custom-built or retrofit machines
- Mining and construction contractors replacing unreliable halogen or fixed beam lights
Problems It Solves
- Fixed beam lights leave large areas dark when the machine moves or pivots
- Manual switches require the operator to leave the cab or approach dangerous zones
- Non-remote lights are difficult to aim when the machine is elevated or in tight spaces
- Housing materials that degrade under UV or moisture cause premature failure in outdoor use
Technical Features
- Ten 5W high-intensity LEDs with a total power draw of 50W and 4000 effective lumens
- 30 degree spot beam pattern with a focused light output suitable for long-range visibility
- Die-cast aluminium housing with a semi-gloss black finish and PC lens for impact and UV resistance
- Remote control operation with a range sufficient for use on most heavy machinery
- IP65 sealing protects against dust and water jets from any direction
- Operating voltage range of 12 to 24V DC supports both 12V and 24V vehicle systems
- 6000K colour temperature provides daylight-like illumination for better contrast
- Lifetime of more than 30000 hours reduces replacement frequency and downtime
- 7 inch diameter body with low profile design fits under tight clearance areas
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-CH015-50W |
|---|---|
| LED | 10 pcs x 5W high-intensity |
| Total Power | 50W |
| Effective Lumen | 4000 lm |
| Beam Pattern | Spot |
| Beam Angle | 30 degrees |
| Colour Temperature | 6000K |
| Operating Voltage | 12/24V DC |
| Waterproof Rating | IP65 |
| Housing Material | Die-cast aluminium |
| Lens Material | PC |
| Body Colour | Black, White |
| Lifetime | More than 30000 hours |
| Dimensions | 7 inch diameter |
| Remote Control | Yes, included |
| Certification | CE, RoHS |
Materials Used
- Die-cast aluminium housing for heat dissipation and structural strength
- Polycarbonate (PC) lens with UV and impact resistance
- Silicone gasket for sealing at the lens and housing interface
- Semi-gloss black powder coating on the housing
- Stainless steel mounting hardware for corrosion resistance
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in semi-gloss black
LED board assembly with ten 5W high-intensity emitters
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP65 rating using water spray test
- Vibration testing on a vibration test machine to simulate machine-mounted service
- High and low temperature alternating humidity testing across the operating range
- Remote control range and signal stability tested under real-world conditions
Customisation Options
- Option to change body colour from black to white or other standard finishes
- Custom remote control frequency or signal protocol for fleet-specific use
- Private label logo on the housing and printed carton
- Alternative cable length to match specific machine harnesses
- Mixed cartons combining this search light with other SUNLITEC models for trial orders
How It Compares With the Alternatives
| Fixed beam LED search light | Remote control allows real-time aiming without operator movement, improving safety and coverage |
|---|---|
| Higher lumen model with wider beam | 30 degree spot reaches further than a flood beam but requires more precise aiming |
| Taller 7 inch search light | Low profile design fits under guard rails and cab edges where taller lights would interfere |
How to Fit and Use It
- Connect the power cable to a fused 12/24V DC source sized for the 50W draw, with a minimum 5A fuse
- Keep the remote control antenna clear of metal obstructions and ensure line of sight to the light
- Aim the spot beam at the target area before locking the bracket in place, using the remote to test the beam
- Clean the PC lens with water and a soft cloth only; avoid solvents that may damage the anti-scratch coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 12 to 24V DC, so the same part number can be fitted to both systems.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for use on public roads or heavy machinery
The lamp is CE and RoHS compliant and rated IP65 for dust and water resistance, suitable for outdoor and industrial use.
Models Often Compared With This One
90W Wireless Handheld Remote Control Search Light 370°Rotation X 135°Tilt
View specification
11 Inch 60W Remote Control LED Search Light SLL-CH078-60W
View specification
7 Inch High/low Version LED Search Light SLL-CH001B-60W
View specification
7 Inch 60W Low Version Remote Control LED Search Light SLL-CH015-60W
View specificationGet a Price on 7 Inch Low Version Remote Control LED Search Lig
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.