Many people keep wondering how can stainless steel sphere be maintained and how to clean it. As a metal balls supplier , I would like to tell you ways to clean and maintain stainless steel balls.
Water and Cloth
Daily cleaning for metal balls, use warm water and cloth.Some stubborn dirt cannot even be completely cleaned off by only scrubbed with detergent and a rag. But if it is brushed with a steel wire ball, it will leave unsightly scratches.At this time, just take some stalks of leftover radishes or cucumbers, dip them in detergent and scrub them, and rinse them with clean water again. In most cases, you need to dry the surface with a towel or cloth after cleaning to prevent water spots. This is very important because the minerals in the water will leave marks on the stainless steel.
Mild Cleaning Agent and Cloth
Neutral cleaning agent and warm water can be used to clean stainless steel sphere , which is not to damage it. A mild neutral cleaning agent can clean very tough dirt, and a neutral cleaning agent can also be used to wipe the dirty area. After cleaning and removing dirt, be sure to rinse the surface thoroughly to prevent the residue of cleaning agent from staining the surface again or causing spots. The natural-derived cleaning agent is biodegradable, and it will miss out when it meets water, including some grease. If you clean stainless steel pots or tableware, this is the best method available.
Glass Cleaner
Fingerprints on the surface of stainless steel decorative balls are probably the most troublesome thing, you can use glass cleaner to clean. You can use a microfiber cloth and spray cleaner. It can also be sprayed directly on stainless steel, but water may drip in the end, or there is no need to waste a lot of detergent. Gently wipe the stainless steel sphere in a circular motion to eliminate fingerprints. Repeat as needed, then rinse thoroughly, and dry with a towel.
Stainless Steel Cleaning Agent
If the stainless steel products are unfortunately rusted, or there are serious oil stains and other impurities on the surface, you need to polish the stainless steel products, stainless steel cleaning agent may be a good choice. This stainless steel cleaner (stainless steel bright cleaner) can help reduce scratches and stain removal. It can also restore the bright surface of stainless steel. After cleaning, be sure to rinse the surface thoroughly, and dry or towel dry.
Specification Reference
| Sphere diameter | 19 mm to 5000 mm |
|---|---|
| Wall thickness | 0.6 mm to 6 mm |
| Stainless grades | AISI 201, 304, 316, 316L |
| Other metals | Carbon steel, brass, copper, aluminium, corten steel |
| Finishes | Mirror polish, Mill finish, Brushed, Electroplating, Sandblasting, Etching, Silk printing, Spray painted RAL colour |
| Forming | Water pressure forming, mould pressing, spinning |
| Freight limit | 7 feet by conventional freight |
